2006 Jeep Wrangler Recalls

NHTSA lists 3 recall campaigns for the 2006 Jeep Wrangler. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 15V222000Apr 15, 201543,939 vehicles potentially affected
  Power train › Clutch assembly › Pedal/hand lever(motorcycle)
  Covers: Jeep Wrangler 2006, Liberty 2006, Dodge Viper Coupe 2006

  Reported issue: Chrysler (FCA US LLC) is recalling certain model year 2006 Dodge Viper and Jeep Wrangler and Liberty vehicles manufactured July 1, 2005, to July 31, 2006. In the affected vehicles, the springs within the clutch pedal position switch that prevents the vehicle from starting unless the clutch pedal is pushed down may break. As a result, the vehicle may not be started when the clutch pedal is pushed down or the engine…

  Possible consequence: If the vehicle unexpectedly moves there is an increased risk of a crash.

  Remedy: Chrysler will notify owners, and dealers will replace the clutch ignition interlock switch, free of charge. The recall began on August 31, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R13.

  Full campaign details →

• 06V147000May 3, 20066,876 vehicles potentially affected
  Power train › Clutch assembly
  Covers: Jeep Wrangler 2006

  Reported issue: On certain sport utility vehicles equipped with 6 speed manual transmissions, the hydraulic clutch master cylinder linkage rod may break. This may not allow disengagement of the clutch when the pedal is depressed.

  Possible consequence: Unintentional vehicle movement, increased stopping distance, and engine stalling could occur which could result in a crash.

  Remedy: Dealers will replace the clutch master cylinder linkage rod free of charge. The recall began on august 7, 2006. Owners may contact daimlerchrysler at 1-800-853-1403.

  Full campaign details →

• 05V460000Oct 6, 2005256,409 vehicles potentially affected
  Power train › Automatic transmission
  Covers: Jeep Wrangler 2005–2006, Chrysler 300 2005–2006, Dodge Magnum 2005–2006 +4 more

  Reported issue: On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. If the shaft moves out of position, the vehicle may not be able to achieve 'park' position.

  Possible consequence: If this occurs and the parking brake is not applied, the vehicle may roll away and cause a crash without warning.

  Remedy: Dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft is retained in the proper position. The recall began on november 28, 2005. Owners may contact daimlerchrysler at 1-800-853-1403.

  Full campaign details →

NHTSA investigations

• PE06015Clutch linkage failureClosed · Apr 20, 2006

← All problems reported for the 2006 Jeep Wrangler