2015 Land Rover LR4 Technical Service Bulletins

235 technical service bulletins (TSBs) are on record for the 2015 Land Rover LR4. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10106003Dec 22, 2015Fuel system, Engine. "situation: a metallic 'clicking' / 'rasping' noise may be evident from the engine. The noise may be more noticeable when the engine is at idle speed and when the engine is cold. Cause: this may be caused by a noisy high pressure fuel pump outlet valve."
• 10106050Dec 21, 2015Brakes, Exterior lighting. "issue – squeak noise when brake pedal is operated. Cause – brake light switch / brake pedal shim interaction. Note: not all vehicles will be fitted with brake pedal shim."
• 10106016Dec 21, 2015Electrical system, Transmission and drivetrain. "situation: the engine malfunction indicator lamp (mil) may be illuminated with diagnostic trouble code (dtc) p068a-00 stored in the powertrain control module (pcm) cause: this may be caused by a pcm software issue (cpu response time error during vehicle shutdown procedure)."
• 10203422Dec 14, 2015Tires. Range Rover vehicles TPMS valve performance - A number of instances have been reported where a loss of pressure in tyres has been observed with associated Tyre Pressure Monitoring System (TKPMS) warning messages. Customers and retailers have been unable to re-
• 10106051Dec 14, 2015Tires, Equipment. "issue: a number of instances have been reported where a loss of pressure in tyres has been observed with associated tyre pressure monitoring system (tpms) warning messages. Customers and retailers have been unable to re-inflate and maintain service pressures due to leakage from the tpms valves. Issue may affect: 15my and 16my range rover evoque, discovery sport, range rover (all new), discovery 4/lr4, range rover…
• 10106013Dec 10, 2015Body and structure, Equipment. "situation: a 'rattle' noise may be heard from the b-pillar area. Note: an allowance of $56.35 per vehicle, has been allocated for locally sourcing paint and materials; claim using zzz001. Cause: this may be caused an incorrect specification within the b-pillar inner panels."
• 10106005Dec 10, 2015Engine cooling. "situation: a 'humming' noise may be evident from the engine at idle. Cause: this may be caused by dust and/or water ingress to the accessory drive belt idler pulley bearing."
• 10105965Nov 17, 2015Transmission and drivetrain, Electrical system. "description to address concerns with the correct operation of the oxygen (o2) sensors, updated powertrain control module (pcm) software is required on the models, model years, engine variants, and vehicle identification number (vin) ranges as listed in the affected vehicle range."
• 10105961Nov 17, 2015Electrical system, Engine cooling. "situation: to address concerns with the correct operation of the oxygen (o2) sensors, updated engine control module (ecm) software is required on the models, model years, engine variants, and vehicle identification number (vin) ranges as listed in the affected vehicle range.
• 10204843Nov 11, 2015Electrical system. Technical Bulletin: Loss Of Drive or flashing gear selector LED Inndicator and/or Related Intelligent Stop/Start Issues
• 10105921Nov 11, 2015Transmission and drivetrain, Engine. "situation: a harsh gearshift engagement may be experienced after shifting from park (p) to drive (d) when the ambient air temperature is low and the engine idle speed is elevated. Cause: this may be caused by the transmission setting not being optimized for the engine speed output."
• 10105908Nov 11, 2015Transmission and drivetrain, Electrical system. "situation: one of the following issues may occur: • the gear selector led indicator flashes and neutral is involuntarily engaged when coming to a stop or immediately after an automatic engine restart (when intelligent stop/start is active)."
• 10105924Nov 9, 2015Equipment. "situation: a high-pitched 'whistle' noise may be evident from the instrument panel area when the climate control system is in use and engine speed is between 2,000 and 3,000 rpm. Cause: this may be caused by a resonance within climate control system air conditioning (a/c) pipes."
• 10105981Nov 5, 2015Engine. "issue: customers may report the engine management light (mil) is illuminated with the possibility of a ‘no engine restarts in xxx miles, diesel exhaust fluid dosing malfunction” warning message displayed within the instrument cluster message center and dtc’s p208b-00/p2bae-00/p2baf-00 stored in the pcm (powertrain control module) cause: air in the system."
• 10105915Nov 2, 2015Electrical system. "situation: the oil level display may not be illuminated on the instrument cluster when the portuguese language option is selected. Cause: this may be caused by an instrument cluster software error."
• 10105863Oct 30, 2015Electrical system, Equipment. "issue the wrong component maybe replaced when troubleshooting bluetooth connectivity in car. Cause the front control display interface module(touchscreen) has no effect on bluetooth connectivity in the car and as such may be incorrectly diagnosed and replaced as the source of the issue."
• 10105866Oct 22, 2015Electrical system, Equipment. "issue: post a service interval reset, on key through starts only, the service required message will appear on the instrument cluster for <1 second (when no service is required). No customer symptoms until a service reset has been performed. When an actual service is required the message will appear for 4 seconds as design intent. Cause: distance to next service initialisation value management between ecm and…
• 10105888Oct 21, 2015Transmission and drivetrain. "issue: a customer may express a concern of a harsh gearshift engagement after shifting from park to drive when the ambient air temperature is low and the engine idle speed is elevated. Vin: 731247 onwards. Engine: v6 s/c 3.0l petrol. Cause: the transmission setting is not optimized for the engine speed output."
• 10105884Oct 8, 2015Equipment, Visibility (wipers, defrost, mirrors). "issue: customers may report that the powerfold door mirrors will not powerfold or are loose -see attached file cause: customers or external influences such as car washes may inadvertantly knock the door mirror head into the folded position, this will then cause the mirror head to be loose"
• 10105832Oct 7, 2015Electrical system, Engine. "situation: at temperatures of 32°f (0°c ) or below, there may be only a 'click' noise heard when trying to start the engine and the engine will not start. Cause: this may be caused by ice on the solenoid contacts."
• 10105827Oct 7, 2015Engine. "situation: a 'humming' noise may be evident from the engine when the engine is idling. Cause: this may be caused by dust and/or water ingress to the primary drive belt idler pulley bearing."
• 10105829Oct 5, 2015Electrical system, Latches, locks and linkages. "situation: after removing a vehicle from transit mode as part of the pre-delivery inspection (pdi), central door locking (cdl) issues with one or more doors (but not the tailgate[s]) may be evident. Cause: this may be caused by an incorrect door module configuration during the vehicle manufacture."
• 10105821Oct 5, 2015Equipment, Body and structure, Visibility (wipers, defrost, mirrors). "situation: the door mirror may 'judder' during powerfold (manual or automatic) operation and/or may be loose or vibrates. Cause: this may be caused by a tolerance stack-up between the door mirror and the door and/or the retaining screws may be loose/under torqued."
• 10105725Sep 30, 2015Electrical system, Engine cooling. "situation: the engine malfunction indicator lamp (mil) may be illuminated. Upon diagnosis, the technician may find one or more diagnostic trouble c ode (dtc ), listed in the table below and relevant to the heated oxygen sensors (ho2s), may be stored in the engine control module (ecm). Cause: this may be caused by thermal shock when water contacts the heated sensing element."
• 10105762Sep 29, 2015Electrical system. "situation: the vehicle battery imay be flat or one of the following messages/warning lights may be displayed on the instrument cluster: • faulty generator • faulty battery monitoring system (bms) • the charge warning indicator is illuminated when the engine is running. Cause: the power supply is a fully integrated system that requires sdd to diagnose overall functionality robustly to make sure customer…
• 10105757Sep 29, 2015Exterior lighting, Body and structure. "situation: the headlamp washer jet(s) may be adrift in the front bumper cover. Cause: this may be caused by the adhesive not being to specification."
• 10105722Sep 28, 2015Visibility (wipers, defrost, mirrors). "situation: the upper windshield finisher may be loose or a wind noise may be evident. Cause: this may be caused by body tolerances in relation to the upper windshield finisher profile"
• 10105731Sep 23, 2015Transmission and drivetrain. "situation: after an eco stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted and then drive (d) or sport (s) is selected, vehicle operation returns…
• 10105723Sep 21, 2015Visibility (wipers, defrost, mirrors). "situation: the windshield wipers may make a squeak noise, judder, or streak the windshield. Cause: this may be caused by a build-up of dirt and grease on the surface of the windshield glass."
• 10105736Sep 17, 2015Suspension. "situation: the air suspension system may not raise/lower with a warning displayed on the instrument cluster and diagnostic trouble c odes (dtc ) c 1a13-64, c 1a36-01, and/or c 1a24-67 may be stored. Cause: this may be caused by the exhaust valve within the air suspension system compressor 'sticking' due to manufacturing issues."
• 10105726Sep 16, 2015Visibility (wipers, defrost, mirrors), Body and structure. "situation: the door mirror may 'judder' during powerfold (manual or automatic) operation and/or may be loose or vibrates. Cause: this may be caused by a tolerance stack-up between the door mirror and the door and/or the retaining screws may be loose/under torqued."
• 10105781Sep 15, 2015Electrical system, Transmission and drivetrain. "situation: a 'transmission fault' message may be displayed on the instrument cluster and the vehicle has defaulted to a fixed gear 'limp home' operation. Upon diagnosis, a technician may find diagnostic trouble code (dtc) p0780-93 stored in the transmission control module (tcm). Cause: this may be caused by an error in the tcm software."
• 10105786Sep 3, 2015Lane departure. "situation: an issue has been identified on a limited number of 2015 model year lr4 (l319), range rover evoque (l538), range rover sport (l494), and range rover (l405) vehicles where the blindspot monitoring control module (bmcm) may experience water ingress. Action: retailers are required to hold only affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale…
• 10105588Aug 27, 2015Electrical system, Exterior lighting. "situation: the adaptive front lighting system (afs) warning lamp may be illuminated/flashing on the instrument cluster. Upon diagnosis, the technician may find diagnostic trouble codes (dtc) b1d64-87 and/or b1d65-87 stored in the headlamp leveling control module. Cause: this may be caused by a software error within the headlamp leveling control module."
• 10105582Aug 27, 2015Tires. "situation: a tire pressure monitoring system (tpms) fault may be displayed in the instrument cluster (ic) and diagnostic trouble codes (dtc) are stored. Cause: this may be caused by various issues."
• 10105667Aug 24, 2015Steering. "issue: residue being left on steering wheel when transportation steering wheel cover is removed. Cause: under investigation"
• 10105648Aug 19, 2015Latches, locks and linkages, Equipment. "issue land rover are currently investigating body control modules (bcm) and remote function actuators (rfa) and associated components replaced for a non-start condition. Following supplier analysis the modules have been categorised as ""no fault found"". Cause currently under analysis."
• 10105651Aug 13, 2015Latches, locks and linkages. "issue: door lock functionality [update with assured vin's] cause: jlr engineering are currently investigating side door latch concerns and therefore request more information to aid investigations"
• 10105643Aug 11, 2015Visibility (wipers, defrost, mirrors). "issue 10my onwards range rover, range rover sport and discovery 4 / lr4 customers may report hearing wind noise from the upper windscreen area. Cause there is a potential that the top windscreen seal has become dislodged over time causing a windnoise"
• 10105583Aug 10, 2015Engine cooling, Electrical system. "situation: on vehicles fitted with the 3.0l sc v6 engine only, the engine malfunction indicator lamp (mil) may be illuminated. Upon diagnosis, the technician may find one or more diagnostic trouble code (dtc), listed in the table below and relevant to the heated oxygen sensors (ho2s), may be stored in the engine control module (ecm). Cause: this may be caused by thermal shock when water contacts the heated sensing…
• 10105542Jul 24, 2015Forward collision avoidance, Equipment. "issue: the message ""radar sensor blocked"" appears in instrument pack display. If blockage occurs while acc is being used, “driver intervene” and/or ""radar sensor blocked"" message will appear on the cluster and dtc c1a67-97 set. Blockage can also occur when acc is not being used. Cause: ""radar sensor blocked"" indicates that the adaptive speed control system's visibility has been reduced due to an obstruction…
• 10105538Jul 23, 2015Equipment. "issue: a customer may report a concern that when the vehicle is started there is no cabin audio at all from any sources. If the nav button is pressed a 2-5 second period of am/ fm radio can be heard and then returns back to no audio. Issue will only self-recover after an ignition cycle. Cause: currently under analysis."
• 10105536Jul 14, 2015Steering. "issue: a customer may report a noise when turning the steering wheel, which is confirmed by the dealer as originating from the steering column. Discovery 4/lr4 (l319) and range rover sport (l320) only. 10 model year onwards. Cause: jlr engineering are currently investigating to understand any situations where the steering column is the cause of noise when turning."
• 10104921Jun 16, 2015Electrical system. "situation: one or more of the following issues may be evident: • the alarm is triggered for no apparent reason; • the 'hood open' message is displayed on the instrument cluster; and/or • a mislock sound is emitted when locking the vehicle. Cause: these issues may be caused by a faulty hood open switch."
• 10105041Jun 5, 2015Lane departure. "description a potential issue has been identified on 2015 model year lr4 (l319), range rover evoque (l538). Range rover sport (l494), and range rover (l405) vehicles where the blindspot monitoring control module (bmcm) may experience water ingress"
• 10104962Jun 5, 2015Lane departure, Equipment. "situation: an issue has been identified on a limited number of 2015 model year lr4 (l319), range rover evoque (l538), range rover sport (l494), and range rover (l405) vehicles where the blindspot monitoring control module (bmcm) may experience water ingress. Action: retailers are required to hold only affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale…
• 10058487Jun 5, 2015Suspension. Land rover: due to torque specification being incorrectly listed in service instruction, the front suspension lower control arm to knuckle bolt(s) has failed, in certain vehicles. No model or years listed.
• 10058468Jun 5, 2015Equipment. Land rover: some vehicles are experiencing water ingress where blindspot monitoring control module (bmcm) is located. Model 2015 range rover, sport, evoque, lr4.
• 10058464Jun 5, 2015Equipment. Land rover: some vehicles will experience water intrusion on blindspot monitoring control module (bmcm). Model 2015 lr4, evoque, sport, range rover.
• 10104581May 29, 2015Engine, Electrical system. "description an issue has been identified on a limited number of 2015 model year lr4 (l319) vehicles where the engine malfunction indicator lamp (mil) may be illuminated and diagnostic trouble code (dtc) p2183-00 may be stored in the engine control module."

← All problems reported for the 2015 Land Rover LR4