2016 Mazda CX-3 Technical Service Bulletins

658 technical service bulletins (TSBs) are on record for the 2016 Mazda CX-3. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10101468Sep 8, 2015Equipment. If the right-side bsm control module requires replacement for any repair, also replace the left side bsm control module to complete the radar aiming procedure (it is ok to replace the left bsm alone). Reason if the right-side bsm control module is replaced alone, “automatic configuration” is not performed due to a program error in the module. Because of this, the required “bsm radar aiming” cannot be performed.
• 10105461Aug 25, 2015Body and structure. Some vehicles may exhibit the rear door side garnish detaching from the door (1 or both sides).
• 10105467Aug 10, 2015Electrical system, Equipment. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 55.00.753 or later). • turn -by-turn navigation guidance does not display on on the active driving display (for vehicles with 55.00.750). • every time the navigation is turned on, the vehicle position starts from the location (dealer) where the cmu was updated from version 55.00.650 to 55.00.750. •…
• 10105481Aug 7, 2015Equipment. Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to dag exchange central (mxconnect>parts and accessories>parts>programs>exchange central) for component availability, source of technical support and prior authorization requirement.
• 10105501Aug 6, 2015Engine, Equipment. Some vehicles may experience the check engine light on with dtc p2610 and p2507 stored in memory after engine start and room fuse 15a (a) removed. • p2610:00: instrument cluster internal engine off timer performance problem • p2507:00: pcm battery voltage low input as a past malfunction, the customer will not notice it (no warning light illuminated), but the dtc may be found during a vehicle service. P2507 in this…
• 10105486Aug 6, 2015Equipment. In support of the new mazda mx-5 and cx-3, mazda will make available for loan on a “as-needed” basis, a special service tool (sst) to allow for the radar aiming of the blind spot monitoring (bsm) system. The (bsm) radar aiming is performed whenever the (bsm) control module, the (bsm) bracket or the rear bumper is replaced. The tool is available for loan on mazda e-store.
• 10099420Jul 14, 2015Engine. Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures. All skyactiv engines equipped with oil pressure switch part…
• 10097942Dec 19, 2012Equipment. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner’s manual. Services performed outside of mazda’s factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

← All problems reported for the 2016 Mazda CX-3