2017 Mazda CX-3 Technical Service Bulletins

519 technical service bulletins (TSBs) are on record for the 2017 Mazda CX-3. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10185807Jan 13, 2017Back-over prevention (rear camera), Electrical system. Rust around rear view camera and/or liftgate opener switch
• 10185797Jan 6, 2017Brakes, Lane departure, Air bags. TPMS WARNING LIGHT ON - Some vehicles may experience a Tire Pressure Monitoring System (TPMS) warning light on when driving on a smooth road surface even if the TPMSF system has been properly initialized at the specified tire air pressure.
• 10186261Dec 22, 2016Lane departure, Electrical system, Equipment. Multi-Model - Blind Spot Monitoring (BSM) System Change (update)
• 10186263Dec 19, 2016Electrical system, Equipment. MAZDA Mobile start (MMS) cannot communicate with vehicle
• 10186250Dec 12, 2016Equipment. Auto A/C blows warm air (Canada/Mexico). Some customers may complain that it is difficult to adjuust the cabin temperature using the auto A/C. This may be more noticeable when the outside temperature is approximately 50 degrees Fahrenheit (10 Ceisius)
• 10186256Dec 2, 2016Electrical system, Equipment. Fctry MESSAGE DISPLAYED AFTER INSTRUMENT CLUSTER REPLACEMENT. After the installatioin of a new instrument cluster, the message "F ctry" IS DISPLAYED INSTEAD OF THE ODOMETER. Some new instrument clusters are in the factory mode setting. Factory mode cancellation is required.
• 10185827Oct 21, 2016Suspension. Auto A/C blows warm air
• 10186918Oct 7, 2016Electrical system. New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.
• 10084957Aug 16, 2016Equipment. Bsm system vehicle detection has changed. Although the overall function is the same as previous vehicles, vehicle detection is different. For detailed bsm system information, refer to service highlights.
• 10092487Aug 11, 2016Equipment. Raising a vehicle with a jack can be dangerous if not done properly. The vehicle can slip off the jack and seri-ously injure someone. In this service information, some important warnings and cautions have been taken from the owner’s manual. For mazda customers who have questions about safely lifting their vehicle to change a flat tire or to install snow chains, please provide a copy of the attached handout for them.
• 10084949Aug 10, 2016Equipment. When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other vehicle becomes “linked” to the vin of that vehicle.
• 10091610Jul 22, 2016Body and structure. When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
• 10090763Jul 22, 2016Body and structure. When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
• 10085383Jul 8, 2016Electrical system. Ids update 101.00 and 101.02 is now available on ms3 under the "ids/infotainment" tab.
• 10092719Jun 24, 2016Brakes. In certain conditions, smart city brake support (scbs) may operate unintentionally. The owner's manual provides 7 examples: objects on the road at the entrance to a curve.vehicles passing in the opposite lane while making a curve.metal objects, bumps, or protruding objects on the road.when passing through a toll gate.when passing under a vinyl curtain or flag.plastic objects such as pylons.two-wheeled vehicles…
• 10085288Jun 24, 2016Brakes. In certain conditions, smart city brake support (scbs) may operate unintentionally. The owner's manual provides 7 examples: objects on the road at the entrance to a curve.vehicles passing in the opposite lane while making a curve.metal objects, bumps, or protruding objects on the road.when passing through a toll gate.when passing under a vinyl curtain or flag.plastic objects such as pylons.two-wheeled vehicles…
• 10092322May 27, 2016Engine. Workshop manual evap system leak inspection using the m-mds has been discontinued for some models. Instead, the workshop manual evap system leak inspection using evap leak tester will be used to troubleshoot evap system leaks.
• 10092421Apr 28, 2016Electrical system. When reprogramming a control module, always use the gr-8 battery management system power supply mode. If not used, the control module reprogramming may fail due to a weak vehicle battery.the gr-8 battery management system power supply mode prevents the vehicle battery from being discharged. This allows the ids to reprogram a control module without interference from a weak or undercharged vehicle battery.
• 10092413Apr 28, 2016Exterior lighting. Some customers may complain about improper operation of the auto-dimming mirror. This may be caused by an obstruction of the front and/or rear light sensor(s) (e.g. Hanging a parking permit from the mirror). Use a soft cloth with mild detergent to clean the mirror. Harsh detergent may damage the front and/or rear light sensor(s).

← All problems reported for the 2017 Mazda CX-3