2011 Mazda MAZDA2 Technical Service Bulletins

218 technical service bulletins (TSBs) are on record for the 2011 Mazda MAZDA2. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10213326Feb 26, 2016Equipment. Mazda guidelines for factory scheduled maintenance
• 10105891Feb 26, 2016Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10213398Feb 23, 2016Equipment. Clunk/bang/buzz noise during first forward movement after sitting
• 10213427Feb 17, 2016Electrical system. HandsFree bluetooth module and/or text messaging troubleshooting procedure
• 10213425Feb 17, 2016Electrical system. Speedometer replacement procedure
• 10213387Feb 15, 2016Suspension, Equipment. Shock absorber replacement guidelines
• 10213333Feb 15, 2016Equipment, Electrical system. Battery test procedure requirements using the GR81291
• 10213332Feb 15, 2016Electrical system, Equipment. Battery Maintenance
• 10213331Feb 15, 2016Equipment, Engine cooling. Sulfur smell from exhaust system.
• 10213417Feb 5, 2016Exterior lighting, Air bags. Passenger fAirbag deactivation (PAD) indicator light illumination
• 10213330Feb 5, 2016Equipment, Engine cooling. PreMixed long life "FL22" Engine Coolant
• 10213329Feb 5, 2016Electrical system, Engine cooling. Engine Start /Stop Procedure with room fuse removed
• 10213422Feb 2, 2016Equipment. Proper usage of driver's floor mat.
• 10213421Jan 25, 2016Exterior lighting. Condensation/Fog in front and rear combination lights
• 10213403Jan 25, 2016Transmission and drivetrain. Correct Application for ATF MV (Type M5), Mercon V, Mercoin LV, and JWS3309 (TIV) Automatic Transmission Fluids
• 10100890Jan 25, 2016Equipment. Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission.note:• atf m-v (type m5) is not the same fluid as mercon®v or mercon®lv atf.• atf m-v (type m5) has a greater viscosity than mercon®v and mercon®lv atf in low temperatures.• atf m-v (type m5) has a greater anti-judder specification than…
• 10100888Jan 25, 2016Exterior lighting. Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/tail-light) combination lights. The recent new models have been fitted with a clear lens which can cause the symp-tom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference…
• 10213385Jan 8, 2016Wheels. Stains appear on wheels
• 10105855Jan 8, 2016Wheels. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
• 10213378Dec 17, 2015Engine cooling, Electrical system. Engine Oil seepage from engine oil pressure switch
• 10105644Dec 17, 2015Engine. Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures.
• 10105481Aug 7, 2015Equipment. Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to dag exchange central (mxconnect>parts and accessories>parts>programs>exchange central) for component availability, source of technical support and prior authorization requirement.
• 10105507Aug 4, 2015Equipment. On some vehicles, the fuel filler lid will not open/close. This may be caused by snow with road salt being brought into the footwell area. The melted salt water then flows along the opener lever (a) and enters into the cable (b) causing the inner-cable to corrode and seize. To correct the problem, a flange has been added to the fuel filler lid opener lever (a) to prevent water from flowing along the lever to the…
• 10100708Feb 27, 2015Equipment. Use the following repair procedure to minimize the need to replace the catalyst converter/exhaust pipe when removing oxygen sensors and/or air fuel ratio sensors.
• 10098885Nov 24, 2014Exterior lighting. When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are present and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no.
• 10060875Nov 18, 2014Engine, Engine cooling. Summary to be provided on a future date.
• 10098895Nov 4, 2014Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road. Follow steering wheel alignment procedure.
• 10059471Nov 4, 2014Steering. Summary to be provided on a future date.
• 10098367Aug 15, 2014Equipment. In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:•mazda vehicles are manufactured with tamper-proof speedometers.•when a speedometer is replaced, the new speedometer will read zero (0) miles.•this procedure is extremely important to accurately represent actual vehicle mileage.•prior to speedometer removal, complete the information required on the…
• 10098347Jul 11, 2014Suspension. Some vehicles may exhibit a creak/squeak type noise coming from the rear of the vehicle when driving over bumps. Noise may be caused by the rear shock absorber rod surface (a) sticking to the bump stopper (b) and/or the bump stopper sticking to the mounting base (c).
• 10059462Jul 11, 2014Suspension. Summary to be provided on a future date.
• 10098282Jun 10, 2014Equipment. This service bulletin provides information regarding the proper use of the driver’s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. • floor mat moves forward due to improper installation. • inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. • floor mat is…
• 10098245Jun 10, 2014Equipment. Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. Due to your feedback and after evaluating a few on-car brake lathes, we are pleased to announce that we have added the pro cut on-car brake lathe to mnao authorized equipment program. The accu-turn is still an approved brake lathe but it is no longer…
• 10098121May 20, 2014Equipment. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.when you encounter a customer with this concern, first verify the condition when the customer noticed this symptom.
• 10098103May 20, 2014Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10097982Jan 24, 2014Exterior lighting. Some customers may complain of condensation/fog inside the front or rear combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light…
• 10098003Jan 21, 2014Brakes. Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of the anti-lock brake system (abs). Do not attempt any repairs.
• 10110991Nov 19, 2013Air bags, Electrical system. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
• 10054788Nov 19, 2013Air bags. Mazda: information provided regarding the indicator light illumination of the passenger airbag deactivation (pad).
• 10110996Nov 11, 2013Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10110995Nov 11, 2013Wheels. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.Use extra care when cleaning wheels.
• 10097805Oct 28, 2013Equipment. A musty/mildew type odor may come from the vents when the air conditioning (a/c) system is operating. It is most noticeable when the a/c is first turned on. This odor is the result of mold growth in the a/c evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “mazda air cooling coil coating” is available…
• 10097722Aug 22, 2013Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10097703Aug 22, 2013Equipment. When driving straight on a rough road at approximately 6-19 mph (10-30 km/h), some vehicles may exhibit a rattle noise from the front passenger side floor.
• 10059735Aug 22, 2013Steering. Summary to be provided on a future date.
• 10097394Jun 4, 2013Equipment. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer noticed this symptom.
• 10097375Apr 17, 2013Equipment. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner’s manual. Services performed outside of mazda’s factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10097377Apr 10, 2013Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10097340Mar 18, 2013Engine. Some vehicles may exhibit an unusual squeak noise when the engine is idling, or just at the moment when the engine is shut off. The noise may be audible from inside the vehicle if one or more windows are open, or if any passenger is opening a door to exit the vehicle.
• 10059436Mar 18, 2013Engine cooling. Summary to be provided on a future date.

← All problems reported for the 2011 Mazda MAZDA2