2009 Mazda MAZDA6 Technical Service Bulletins

254 technical service bulletins (TSBs) are on record for the 2009 Mazda MAZDA6. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10098142May 14, 2014Equipment. Some vehicles may experience a mil illumination with a dtc p1450:00 stored in memory.•dtc p1450:00 - unable to bleed up fuel tank vacuumthis concern may be caused by the purge valve, which has been modified to eliminate this concern.
• 10061503May 14, 2014Electrical system. Summary to be provided on a future date.
• 10098210Apr 3, 2014Engine. Some vehicles may exhibit an unusual squeak noise when the engine is idling, or just at the moment when the engine is shut off. The noise may be audible from inside the vehicle if one or more windows are open, or if any passenger is opening a door to exit the vehicle.
• 10061497Apr 3, 2014Engine cooling. Summary to be provided on a future date.
• 10098049Mar 17, 2014Engine. Some vehicles may exhibit an unusual squeak noise when the engine is idling, or just at the moment when the engine is shut off. The noise may be audible from inside the vehicle if one or more windows are open, or if any passenger is opening a door to exit the vehicle.
• 10061498Mar 17, 2014Engine cooling. Summary to be provided on a future date.
• 10098022Feb 14, 2014Equipment. When replacing the siriusxm satellite radio unit (or a mazda connect tuner and amp unit (tau)) with replacement tuner for any reason, a call must be made to inform siriusxm of the existing radio id and the new/ replacement sat radio id as soon as possible to ensure the customer leaves the dealership with active (working sat radio.
• 10097982Jan 24, 2014Exterior lighting. Some customers may complain of condensation/fog inside the front or rear combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light…
• 10110991Nov 19, 2013Air bags, Electrical system. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
• 10054788Nov 19, 2013Air bags. Mazda: information provided regarding the indicator light illumination of the passenger airbag deactivation (pad).
• 10110996Nov 11, 2013Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10110995Nov 11, 2013Wheels. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.Use extra care when cleaning wheels.
• 10097805Oct 28, 2013Equipment. A musty/mildew type odor may come from the vents when the air conditioning (a/c) system is operating. It is most noticeable when the a/c is first turned on. This odor is the result of mold growth in the a/c evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “mazda air cooling coil coating” is available…
• 10097722Aug 22, 2013Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10097390Jun 14, 2013Equipment. To improve handling of customer concerns with hands-free (bluetooth) vehicle systems, mazda launched a new service procedure and part exchange program effective feb. 08, 2010 on applicable vehicles.
• 10097394Jun 4, 2013Equipment. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer noticed this symptom.
• 10097375Apr 17, 2013Equipment. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner’s manual. Services performed outside of mazda’s factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10097377Apr 10, 2013Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10097348Mar 11, 2013Transmission and drivetrain. Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission.note:•atf m-v (type m5) is not the same fluid as mercon®v or mercon®lv atf.•atf m-v (type m5) has a greater viscosity than mercon®v and mercon®lv atf in low temperatures.
• 10097343Mar 11, 2013Equipment. This service bulletin provides information regarding the proper use of the driver’s floor mat to avoid any poten-tial interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.•floor mat moves forward due to improper installation.•inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used.•floor mat is…
• 10052155Mar 11, 2013Equipment. Mazda: on some vehicles, to avoid potential interference of foot placed on pedals, information is provided regarding proper use, and placement, of driver's floor mat. Various models and model years.
• 10097369Mar 4, 2013Equipment. When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are present and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no.
• 10097367Mar 4, 2013Transmission and drivetrain. Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission.note:•atf m-v (type m5) is not the same fluid as mercon®v or mercon®lv atf.•atf m-v (type m5) has a greater viscosity than mercon®v and mercon®lv atf in low temperatures. •atf m-v (type m5) has a greater anti-judder specification than mercon®v…
• 10052160Mar 4, 2013Exterior lighting. Mazda: on various model years and model vehicles, the headlamp assembly would have excessive condensation or water within and should be checked and replaced, if necessary for correct installation.
• 10097320Feb 19, 2013Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10097295Jan 15, 2013Equipment. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner’s manual. Services performed outside of mazda’s factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10097300Jan 14, 2013Equipment. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
• 10097299Jan 14, 2013Equipment, Engine cooling. Some vehicles may exhibit a rattle noise and/or exhaust leaking noise from the rear of the vehicle. The noise may be caused by a gap between the exhaust hanger bracket and flange, which allows moisture containing road salt to enter and cause the exhaust studs to rust and possibly break off.the welding location of the exhaust hanger bracket and flange has been changed during vehicle production to ensure the hanger…
• 10059423Jan 14, 2013Engine cooling. Summary to be provided on a future date.
• 10097941Dec 21, 2012Exterior lighting. Some customers may complain of condensation/fog inside the front or rear combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural henomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light…
• 10097942Dec 19, 2012Equipment. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner’s manual. Services performed outside of mazda’s factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10097841Nov 16, 2012Engine cooling. Some vehicles may exhibit an exhaust leaking noise from the rear of the vehicle. The noise may be caused by a gap between the exhaust hanger bracket and flange, which allows moisture to enter and cause the exhaust studs to rust and possibly break off. The welding location of the exhaust hanger bracket and flange has been changed to ensure the hanger bracket and flange are flush with no gaps to allow moisture…
• 10061510Nov 16, 2012Engine cooling. Summary to be provided on a future date.
• 10097755Oct 19, 2012Engine. Some vehicles may exhibit an unusual squeak noise when the engine is idling, or just at the moment when the engine is shut off. The noise may be audible from inside the vehicle if one or more windows are open, or if any passenger is opening a door to exit the vehicle.
• 10097754Oct 19, 2012Equipment. The multi information display (mid) and navigation system support for diagnostics, parts authorization, and parts exchange require contacting the proper source. Please contact the appropriate source by referring to the following tables.
• 10059442Oct 19, 2012Engine cooling. Summary to be provided on a future date.
• 10043728Feb 1, 2012Latches, locks and linkages. Mazda: see document search button for owner letter. Small cracks may occur at rubber button of front door handle request switch, allowing moisture to enter and causing a malfunction of advanced keyless entry system to affect door lock/unlock features. *pe updated 12/18/12.
• 10043661Jan 27, 2012Engine cooling. Mazda service program (msp27) - readiness code for evaporative monitoring system.
• 10043662Jan 11, 2012Tires. Mazda: tpms warning light illumindated. This may be caused by damage to the valve nut and/or valve stem of the wheel.
• 10037949Feb 7, 2011Exterior lighting. Mazda: there is possible excessive condensation or water inside the headlamp unit on many mazda models.
• 10037655Dec 23, 2010Exterior lighting. Mazda: there is condensation and fog in the front and rear combination lights.
• 10037413Nov 18, 2010Transmission and drivetrain, Electrical system. Mazda: the malfunction light is on and an internal trouble code.
• 10037253Oct 27, 2010Equipment, Engine cooling. Mazda: some vehicles expererience poor a/c or high engine coolant temps during low spees or idle. The symptoms may be due to a software malfunction.
• 10033969Jul 7, 2010Exterior lighting. Mazda: rear combination light heat deformation. In warmer climates, some vehicles with halogen bulb, rear, combination light assemblies might experience heat deformation of the inner red lens. May be caused by a combination of high ambient temperatures and the brake lights being on for an extended period of time.
• 10033987Jun 23, 2010Latches, locks and linkages, Body and structure. Mazda: rear door locks inoperative due to freezing. When ambient temperature rapidly drop below 0% f, especially after a rain or car wash, some vehicles may experience a rear door that is unable to open due to an inoperative rear door lock.
• 10028486Dec 20, 2009Air bags. Mazda: air bag system warning light flashing. This may be caused by coating on the terminals allowing oxidation. The new terminals have a thin coating to prevent oxidation.
• 10032668Oct 1, 2009Transmission and drivetrain. Mazda: purge valve contact/hard rattle noise. Some vehicles may experience a rattle or a loud tick noise from the engine compartment during purge valve operation (the noise is loudest during 30%-60% duty cycle). This may be a hard contact noise caused by misalignment of the purge valve, rubber grommets, or attaching hoses forcing contact with the pcm, pcm bracket, metal bracket or an excessive valve tick noise.
• 10032548Sep 9, 2009Engine cooling. Mazda: poor a/c performance/high engine coolant temperature due to inoperative cooling fan. Some vehicles may exhibit poor a/c performance or high engine coolant temperature during low vehicle speeds or when the engine is idling. This may be due to an inoperative cooling fan caused by a malfunction of the fan control module (fcm) software.
• 10028524Feb 11, 2009Engine cooling. Mazda: vehicles may exhibit a concern of unstable idling or, in some rare cases, stalling, just after the vehicle stops with no dtcs detected. Problem is due to the accumulation of carbon deposits inside the throttle body causing air flow to decrease.
• 10028249Nov 25, 2008Electrical system. Mazda: some vehicles equipped with auto wipers and headlamps and port installed accessory homelink/compass mirror, may have a concern causing the auto functions to become inoperative.

← All problems reported for the 2009 Mazda MAZDA6