2019 Mercedes-Benz CLA250 Technical Service Bulletins

144 technical service bulletins (TSBs) are on record for the 2019 Mercedes-Benz CLA250. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 11008880Oct 3, 2024Electrical system. Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved.
• 11008091Sep 28, 2024Electrical system. Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21)…
• 11007974Sep 21, 2024Exterior lighting. Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front…
• 11008056Sep 16, 2024Engine. Complaint Check engine light on. Fault code P207273 - "Throttle actuator valve is blocked due to ice" stored. Engine may crank and not start. Fault code P210185 may also be stored. Cause Moisture freezing on throttle actuator during extreme low ambient temperatures. Remedy Update software of engine control module. Software increases throttle valve flapping after engine turned off to prevent moisture buildup.
• 11008323Sep 10, 2024Exterior lighting. Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging…
• 11007753Sep 10, 2024Exterior lighting. Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing…
• 11007790Sep 9, 2024Exterior lighting. Complaint Headlamps fogged or droplets forming. Cause Due to the housing cover with pressure compensation diaphragm, the headlamps are a "closed system". This means that the headlamps are protected against acid gases, dirt and exhaust gas. However, moisture can still enter from two sources. Through absorption and desorption (the commonest cause) or through permeation.
• 11005294Jul 23, 2024Exterior lighting. Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 °C/+64.4 °F) Note: Do not wash the vehicle or subject it to…
• 11005313Jul 17, 2024Engine. Complaint Check engine light on and fault code P019185 current or stored in MED41 control unit. Adaptation and misfire faults may also be stored. Vehicle may enter limp home mode. Cause False detection of rail pressure sensor out of range. Remedy Update software of engine control module N3/10. Reset mixture adaptation and clear fault codes.
• 10253708Apr 30, 2024Electrical system. In our continuing efforts to assure the proper performance of Mercedes-Benz products and to enhance the satisfaction of our customers, Mercedes-Benz USA (MBUSA) is extending the coverage for the Fuel System Control Module (FSCM) software on your vehicle from the original New Vehicle Limited Warranty of 4 years / 50,000 miles to 1 S year: / 150,000 mile: (whichever occurs: first), and applies to the vehicle…
• 10253703Apr 26, 2024Electrical system. This is to notify you of the Service Campaign OTA update for the MBUX system software in 750,313 Model Year (MY) MY19-24 A-Class, CLA, CLS, E-Class, EQB, GLA, GLB, GLC, GLE, GLS, GT 4-door (177, 118, 257, 213, 238, 243, 247, 253,167, 290 platform) vehicles. The vehicles will not be visible or flagged in VMI or EVA.
• 10249540Jan 29, 2024Electrical system. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2019-2023 A-Class, CLA, E-Class, G-Class, GLA, GLB, GLC, GLE, GLS, and S-Class (177, 118, 238, 463, 247, 253, 167, and 222 platform) vehicles, the communication module system software does not correspond with the latest series production configuration. The communication module system will receive an…
• 10249495Jan 24, 2024Steering. Noises in the steering column area when steering. Under analysis. Check which area of the steering column the noises occur in. Do the noises tend to occur at the bottom in the driver footwell or do they tend to occur in the area of the steering column switch module (MRSM/SCCM)? If the noises occur in the area of the MRSM/SCCM, work through the following points: - Loosen screws of the MRSM/SCCM and steering wheel…
• 10249482Jan 24, 2024Steering. The steering wheel generates grinding noises between the steering wheel and steering column switch module during steering maneuvers See example file in the attachments area: Lenkrad-Schleifgeräusch_SteeringWheel-GrindingNoises.mp4 The plastic cover on the back of the steering wheel is not positioned correctly and may therefore rub against the steering column switch module Please use the following noise files for…
• 10249726Jan 18, 2024Electrical system. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz, has determined that in certain MY 2017-2021 C-Class, CLA, CLS, E-Class, GLC, GLE, GLS, AMG GT, S-Class, SL, and SLC (205, 117, 257, 213/238, 253, 166/292, 190/290,217/222, 231, 172) vehicles, the software of the communication module does not correspond with the latest series production configuration.
• 10248195Dec 7, 2023Electrical system. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY19-23 A-Class, C-Class, CLA, CLS, E-Class, EQB, G-Class, GLA, GLB, GLC, GLE, GLS, AMG GT, S-Class (177, 205, 118, 257, 213, 238, 243, 463, 247, 253, 167, 290, 217, 222 platform) vehicles, the communication module system software does not correspond with the latest series production configuration.
• 10248162Dec 4, 2023Seats. Crease formation on genuine leather seat covers in vehicles with low mileage • Objects left on the seats for extended periods of time (pressure marks). • Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). • Light initial creases due to vehicle handling. • Light creases in the outer covers originating from the production process (missing finish). Heat treatment of…
• 10248203Dec 1, 2023Electrical system. Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY19-23 A-Class, CLA, CLS, E-Class, EQB, GLA, GLB, GLC, GLE, GLS, AMG GT (177, 118, 257, 213, 238, 243, 247, 253,167, 290 platform) vehicles, the head unit software does not correspond to the current series production configuration. The head unit will receive an OTA update to optimize the "Live Traffic Information" service…
• 10246281Nov 17, 2023Engine cooling. Fault code P06DA00 is found current or stored in engine control unit. Check engine light may be activated. Various causes Up to Model year 2018 Fault code P06DA00 can be disregarded if not activating the check engine light, unless otherwise specified in the guided test. The vehicle continues to operate as designed. Further causes should be investigated if complaint of check engine light is received.
• 10244837Oct 10, 2023Electrical system. The "SOS nonfunctional" message appears sporadically in the instrument cluster of the vehicle. The fault code B129C00 is stored in the control unit log. The message occurs in particular after the vehicle has been non-operational for an extended period of time; the message then disappears of its own accord after a few minutes. No functional limitation to the emergency call system is to be expected. Software error in…
• 10241527Aug 28, 2023Electrical system. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2018-2023 C-Class, EQE, EQE SUV, EQS, EQS SUV, GLC, GLE and S-Class (206, 295, 294, 297, 296, 254, 167 and 223 platform) vehicles, the communication module software does not correspond with the latest series production configuration. The update is free of charge and will be carried out in the background.
• 10241790Aug 18, 2023Electrical system, Equipment. The Mercedes me connect services cannot be activated. The remote status data does not update. Error in N112/9 - control unit for telematics services (HERMES). In the HERMES control unit log, under the "URL" tab, the value DEFAULT is stored for "atpServerUrl" and/or "rcsServerUrl". Please carry out a re-commissioning of the control unit N112/9 - Control unit for telematics services (HERMES), which includes both a…
• 10238424Jun 9, 2023Equipment, Electrical system, Other or unknown. In the MBUX weather app, the temperature is displayed in the wrong unit (Fahrenheit instead of °C, or vice versa). Temperature setting in Mmc mobile application settings incorrect Remedy Adjust the setting in the Mercedes me connect app via mobile phone (settings -> units)
• 10235667Apr 4, 2023Electrical system. Complaint Ambient lighting malfunctions sporadically, mainly in the Ocean Blue color value and with animation "ON". After the next ignition cycle, the ambient lighting functions again correctly. Cause Software in coupling elements (EKE) faulty. The coupling element software cannot be updated in After-Sales. Remedy In a complaint case, replace the respective wiring harness (coupling elements are installed on the…
• 10231032Jan 5, 2023Latches, locks and linkages, Electrical system. Complaint Tailgate opens unintentionally. Cause Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. E.g. when stored in trouser pocket, handbag etc. Remedy As of the 6th generation, the vehicle key can be recoded so that the tailgate no longer opens as a result of a long press on the button, but by double-clicking on the button instead.
• 10227143Nov 1, 2022Steering. Complaint Squeaking noise from area of input shaft of electric steering Cause Inadequate lubrication. Remedy Grease/lubricate sealing area of input shaft. • The steering components can be greased/lubricated while they are still installed
• 10225805Oct 28, 2022Transmission and drivetrain. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz, has determined that on certain MY 2019-2020 A-Class and CLA-Class (118 and 177 platform) vehicles, the transmission control unit software does not correspond with the current series configuration. The possibility exists that the vehicle does not start and the fault message “vehicle at risk of rolling and transmission not in P position” is…
• 10225807Oct 1, 2022Engine cooling. Complaint Chirping or tapping noise originating in area of front crankshaft pulley when engine cold. Noise may lessen as engine reaches operating temperature. Attachments File Description M260 noise.mp4 Noise example Cause Harmonics from timing chain drive. Remedy Replace timing chain tensioner with part A2600502000. Note: This noise will not cause damage to the engine or other symptoms. The chain tensioner should…
• 10222481Sep 8, 2022Electrical system. Complaint Customer states after a bus sleep the SiriusXM category changes from "My Favorites" to "All Stations" or a different category. Sometimes, the "My Favorites" category will be unavailable for the entire drive cycle. Cause Current MBUX Multimedia System (A26/17) software release Remedy Software update of MBUX Multimedia System (A26/17) to E905.4 (in development). This document will be…
• 10222464Sep 2, 2022Steering. Complaint Vibrations in steering at speeds lower than 30 mph. Possible when turning and also partly noticeable after changing to winter or all-season tires. Cause Controller stability of steering software, caused by reduced friction in steering (tolerance for production + running-in characteristics). Remedy Software update available in 1st quarter of 2023 (adaptation of stability limits)
• 10219265Aug 2, 2022Steering. Complaint Vibrations in steering at speeds lower than 30 mph. Possible when turning and also partly noticeable after changing to winter or all-season tires. Cause Controller stability of steering software, caused by reduced friction in steering (tolerance for production + running-in characteristics). Remedy Software update available in 1st quarter of 2023 (adaptation of stability limits)
• 10217159Jul 20, 2022Electrical system, Engine cooling, Equipment. Complaint - Vehicle cannot be unlocked/ vehicle does not start - Display message in instrument cluster "Battery - Start Engine - see Operator's Manual Cause Root cause is a bus keepawake in either the Headlight control unit or in one of the following: ALC, IC, SAM, PTCU, ESP. Additionally, the quick test will show U116000 "A bus keepawake control unit has been detected" in the electronic ignition switch…
• 10217158Jul 11, 2022Equipment, Steering. Complaint Noises from the area of the steering column. - Creaking - Squeaking - Chattering - Humming - Grinding Cause At present, there are no known noise problems with the steering column. Remedy Check surrounding area of the steering column for possible noises. - Instrument panel support - Steering column switch module If the cause of the noise can be narrowed down to the steering column, create a PTSS case
• 10217163Jul 8, 2022Equipment, Electrical system. Complaint The Apple Carplay interface cannot be controlled via the center console touchpad or the right-hand steering wheel touchpad. Cause A setting on the iPhone may prevent control via the touchpad Remedy To remedy on the affected iPhone, navigate to "Settings" -> "Accessibility" -> "Touch" and turn the "BackTap" option OFF.
• 10215220Jun 3, 2022Transmission and drivetrain. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz, has determined that on certain MY 2019-2020 CLA-Class, A-Class, and GLB-Class (118, 177, and 247 platform) vehicles, the transmission control unit software may not correspond to current product specifications. It is possible that the vehicle may switch to coasting mode during deceleration or rolling when engaged in drive mode “E”.
• 10210929Apr 14, 2022Electrical system. Complaint Volume and bass level too low Cause Current sound amp (N40/3) software release. Important: • On vehicles with standard sound, the rear subwoofer (H21/35) emits the engine sound only (if equipped with M139 engine) • On vehicles with code 853 (Advanced Sound) or 810 (Premium Sound), the rear subwoofer (H21/35) emits not only the engine sound, but also entertainment sound Remedy Perform a software update…
• 10209880Mar 3, 2022Body and structure. Complaint Staining at top and bottom of trim bars of doors. See example pictures 1, 2. Cause Discoloration of the protective coating of beltline door trim bars and upper door trim bars due to strong alkaline detergent in car washes. Remedy 1. Polish the trim bars with polish A 000 986 43 74. 2. If the complaint cannot be rectified by polishing, replace the door beltline trim bars, door upper trim bars and rear side…
• 10206077Dec 8, 2021Engine cooling. "MY15+ M278 and M157 Equipped Vehicles with Fault Code ""P023400 – Boost Pressure is Too High"" "
• 10205841Sep 24, 2021Other or unknown, Wheels. Spare wheel.
• 10205806Aug 30, 2021Equipment. Upon selecting navigation, the central display may show the following message: "Map data does not match with your system. Please insert a medium containing the corresponding map data". the navigation menu cannot be opened.
• 10199675Jul 14, 2021Suspension, Transmission and drivetrain. Vibrations/ humming when moving off or maneuvering with the wheels turned
• 10199654Jul 6, 2021Equipment. "Free browsing, Internet access via Wi-Fi hotspot and Internet radio nonfunctional"
• 10189400Feb 11, 2021Engine cooling. Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year 2018-2019 C and E-Class vehicles (205/238 platforms), an incorrect activated carbon filter might have been installed. In this case, the vehicle may not meet emission and certification requirements. MBUSA will conduct a voluntary Emission Recall Campaign in which an authorized Mercedes- Benz dealer will…
• 10189411Feb 5, 2021Back-over prevention (rear camera). Update IDC Control Unit Software
• 10186147Dec 30, 2020Visibility (wipers, defrost, mirrors). Air Conditioning System Occasionally Does Not Cool Correctly At Outside Temperatures Above 40°C
• 10186139Dec 1, 2020Engine, Fuel system. Check engine light on and FC P146264 sto- red in engine and fuel pump control units
• 10186134Nov 12, 2020Transmission and drivetrain. Communication errors with control unit AWD_M- FA2 - N15/17 - All-wheel drive (transfer case)
• 10186133Nov 12, 2020Electrical system. Fault code for short circuit to ground stored in AW- D_MFA2 - N15/17 - all-wheel drive (transfer case)
• 10181198Sep 18, 2020Engine cooling, Equipment. Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz vehicles, has determine that on certain MY 19 190, 205 and 213 (C-Class, E-Class and GT-Class) vehicles, the information label containing the exhaust gas cleaning information may not have been installed to production specifications.
• 10186132Sep 12, 2020Transmission and drivetrain. Humming/ vibrations/ noises from the area of the rear axle while maneuvering or when moving off

← All problems reported for the 2019 Mercedes-Benz CLA250