2008 Mercedes-Benz E320 Technical Service Bulletins

84 technical service bulletins (TSBs) are on record for the 2008 Mercedes-Benz E320. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10166103Jul 10, 2014Seats. The controls on the partially electric seat adjustment switch stick or are loose or broken.
• 10166090Jul 10, 2014Seats. Possible complaints: 1. Memory function of electric seat fore/aft adjustment not functioning. 2. Seat fore/aft adjustment with easy entry/exit feature not functioning. 3. Head restraint presetting not functioning. 4. Seat fore/aft adjustment can only be adjusted for 2 sec with the seat adjustment switch (seat can only be adjusted in longitudinal direction in fits and starts). 5.
• 10166084Jul 9, 2014Seats. Rubbing noises at the point at which the covering rubs against the cover. Only occurs on vehicles with the sport package .
• 10166083Jul 9, 2014Air bags. Rubbing noises arise between the covering and cover of the sidebag
• 10166082Jul 9, 2014Seats. Noises from area of seat adjuster or cushion frame.
• 10136031Jun 23, 2014Engine cooling. Engine noises (rattling) after engine start
• 10167489Mar 19, 2014Engine cooling. Noise: A rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: Fault code entries in engine control unit: SIM271DE20: P001177 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001762 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the…
• 10167525Mar 3, 2014Equipment. Apple products (iPhone or iPod) are not charged via the serial USB interface of the COMAND Online control unit (A40/3) in the stowage compartment of the center console.
• 10167000Feb 18, 2014Steering. Surface damage on steering wheel trim
• 10166975Feb 11, 2014Equipment. This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with…
• 10166976Feb 3, 2014Equipment. Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
• 10205233Aug 5, 2013Electrical system. Mobile phone cotacts are not transferred completely.
• 10167553Jul 1, 2013Fuel system. Combination message: "Clean fuel filter" is displayed. The fault code 162500 (water level message - Bosch) or P226997 (water level message - Delphi) or 171600 (filter load - Bosch) is stored in the engine control unit.
• 10167561Jun 27, 2013Exterior lighting. Xenon burner inoperative or flickers
• 10044222Apr 20, 2012Seat belts. Mercedes benz: front or rear seat belt does not roll up correctly. Dirt deposits on the seat belt guide due to soiled seat belt. Also included models 169, f cell, 246, and 231. No model years given.
• 10044181Mar 12, 2012Steering. Xentry: rattling/thumping noises from the area of the steering on rough roads or when driving over road undulations. No model years given. Also included models 168 and 172.
• 10039256May 31, 2011Engine cooling. Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. There could be a problem with the camshaft and/or scoring of a piston.
• 10041066Mar 6, 2011Exterior lighting. Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences.
• 10037983Dec 13, 2010Exterior lighting. Mercedes-benz: curve illumination is inoperative.
• 10038225Dec 8, 2010Steering, Electrical system. Mercedes-benz: diagnostic procedures for the driver authorization system.
• 10037408Nov 19, 2010Suspension. Mercedes-benz: shock absorber procedure.
• 10033070Dec 16, 2009Engine cooling, Electrical system. Xentry (mercedes): engine warning lamp is currently on or was on and a delay fault of the camshaft adjust to current or stored in the engine control unit. Models 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, and 403. No model years listed.
• 10032727Sep 17, 2009Suspension. Mercedes: following fault codes are entered in the control unit and displayed-fc5320 drain valve:open circuit or insufficient valve current in models series 211, 219; fc5260 drain valve open circuit or insufficient valve current in model 221; fc5250 drain open circuit or insufficient valve current in model series 251, 164. Defective connecting cables to drain valve at airmatic compressor. This results in the…
• 10032709Aug 13, 2009Transmission and drivetrain. Mercedes: cracking/creaking noises from front axle when vehicle is subject to torsion or when steering wheel is turned. This is mainly heard when the vehicle is stationary or when the vehicle is moving slowly. Relative movement between the frame type integral support and steering plate can cause the plate to make contact with the frame type integral support of the front axle, which in turn causes noises.
• 10028686May 6, 2009Electrical system. Mercedes: air matic visit workshop displayed within instrument cluster. Models 164, 211, 219, 221 and 251. Included 4matic, amg (compressor) amg, bluetec and wagon. Model years unknown. *pe updated 9/18/09.
• 10016670May 1, 2009Fuel system. Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. This may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or instrument cluster. *tt updated 2/23/09. *pe updated 9/18/09. Model years unknown.
• 10029105Apr 2, 2009Fuel system, Other or unknown. Mercedes benz: fuel loss at pressure regulator valve and/or poor engine running characteristics (shakes, knocks, surges, changes to lip home mode, poor output, poor fuel economy, combustion noise, vehicle stalls). May be caused by malfunction at pressure regulator valve (prv) due to improper installation.
• 10030665Mar 1, 2009Equipment, Other or unknown. Mercedes: it has been determined that the tele aid may not function properly as a result of a hardware fault in the tele aid control module. If this condition exists an instrument cluster message of no service and tele aid inoperable will be seen.
• 10028667Mar 1, 2009Engine cooling. Mercedes: replace oxygen sensor and update engine control module software. Model 211. My 2007-2009.
• 10028649Jan 9, 2009Air bags. Mercedes: srs indicator lamp on. The srs light is illuminated and diagnostic fault code(s) b9223 and/or b9243 are stored in the srs ecu. The resistance of the ignition squib circuit for the sidebag may be too high. Model 211. All model years.
• 10020460Dec 4, 2008Steering. Play in the rack and pinion steering system. Models 203, 209, 210, 211, 215, 220, 230. Mercedes benz. *kb updated 5/13/09.
• 10027827Aug 1, 2008Electrical system, Engine cooling. Mercedes benz: update engine control module software and scn coding. Under certain circumstances the oxygen sensor may clog with carbon particulates. Model e320 bluetec for 2007 and 2008.
• 10026201Jun 16, 2008Fuel system. Mercedes benz: work on pressure regulator valve (as of cd13, 1600 bar system). Fuel loss at the pressure regulator valve and/or poor engine running characteristics (shakes, knocks, surges, changes to limp home mode, poor output, poor fuel economy, combustion noise).
• 10026202Jun 4, 2008Engine cooling. Mercedes benz: oil leak at the engine air intake duct. Oil leakage at the air intake duct downstream of the engine air filter to the turbocharger, the cause may be a damaged or incorrectly installed seal.

← All problems reported for the 2008 Mercedes-Benz E320