2008 Mercedes-Benz R350 Brakes Problems

“I have tried, since 730 this morning to find out what can be done with regard to the recall of my car. I contacted my dealer - Faulkner Mercedes in Doylestown.... who explained that they couldn't do anything, as they have neither the tools nor the parts to address this issue, and won't have for quite some time, and that I needed to call the Mercedes recall hotline. Which, I did. …”

“The brake fluid lines are corroding much faster than in other models, and without actual corrosion under the car. It happened to my car, and I have been reading forums of MB owners of this same R model, as well as C, E, GLK, and ML models all reporting the same issues. The lines corroding earlier to due to the brake boost system failure and other fluids/air entering the system is the most consistent cause of brake line failure I was able to get off the internet, as well as MB not using lines with proper material. …”

“Every time I braked, car not stop until very close to the car in front of me. Couples time I hit the car in front of me. Sometime I have to slam the brakes very hard, but the car still move forward.”

“I drove to work with no problems. However; returning I started car and could hear a slight sound. I immediately noticed that the car rising sign was illuminated and I waited for car to rise. The car failed to rise and was sitting so low to tires that I could not drive and had to be towed home. At home I tried again to see if car would rise and again it failed. In addition to the ABS break sign being illuminated as well. The message on dash stated to contact dealership for service. My mileage is at132,051.”

“The contact owns a 2008 Mercedes-Benz R350. The contact received notification of NHTSA Campaign Number: 22V315000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available.”