2011 Mercury Milan Engine cooling Problems
- Complaints
- 2about this part
- Share
- 1%of 192 total for the year
- Median mileage
- 41,508miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 2 complaints about the engine cooling of the 2011 Mercury Milan, 1% of the 192 complaints for this model year. Where a mileage was given, the median is 41,508 miles.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“Was stopped at a traffic light. After the light turned green I applied the gas pedal and the car slowly preceded I was unsure I would make it through the intersection I pulled to the side. I was able to restart car and it accelerated normally. Luckily no one rearended me.”
NHTSA complaint #10491593, filed 2013-01, 41,000 miles“Wrench and engine light came on. Vehicle would not go beyond 5 MPH. Waited and turned the car back on.,engine light stayed lit and was able to get home. I took the vehicle to autozone and received a diagnostic code p2111: throttle actuator control system, tachometer open or shorted. Called ford and they are aware but stated that they will not repair with a recall being issued.”
NHTSA complaint #10567356, filed 2014-03, 42,015 milesRelated service bulletins
- 10250305Feb 8, 2024When performing any transmission fluid change or topoff involving Motorcraft® Premium ATF, MERCON® V has replaced all versions of Motorcraft® Premium ATF and can be used going…
- 10109070Sep 21, 2016The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to…
- 10043325Jan 26, 2012Ford/mercury/lincoln: some model year vehicles may exhibit a message with a red triangle on and stop safely now, and/or have a diagnostic trouble code, no start condition.
- 10043648Jan 1, 2012Ford: the variable camshaft timing vct) solenoid movement may be temporarily restricted due to debris in engine oil that is causing diagnostic trouble codes (dtcs).
- 10040948Mar 15, 2011Ford: there may be a leaking/stuck canister purge valve which can cause multiple driving systems. The malfunction light may be on with or without stored trouble codes.
- 10039064Feb 11, 2011Ford: there may be a hard start or rough idle accompanied with two trouble codes. The problem may have to do with camshaft timing. 2010-2011 fusion/escape/milan/mariner.
Engine cooling: other model years
Other parts of the 2011 Mercury Milan
77 complaintsTransmission and drivetrain
31 complaintsExterior lighting
29 complaintsEngine
22 complaintsVehicle speed control
22 complaintsAir bags
17 complaintsElectrical system
17 complaintsFuel system
17 complaintsBrakes
12 complaintsOther or unknown
6 complaintsElectronic stability control
4 complaintsWheels
2 complaints
← All problems reported for the 2011 Mercury Milan
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 27, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology