Skip to content
Recall campaign11V514000

Recall 11V514000: 2005–2011 Freightliner Cascadia and 4 other models

Steering › Rack and pinion
Report received
Oct 13, 2011
Manufacturer
Daimler trucks north america
Potentially affected
9,689vehicles
Model years
2005–2011

Check your own vehicle. A recall applies only to vehicles within the affected build range. Enter your VIN at nhtsa.gov/recalls. Recall repairs are free at a franchised dealer.

What NHTSA recorded

Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. The lower pinion bearing may corrode and fail. A failed bearing may lead to damage of the spool valve seals. A damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Possible consequence

The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Remedy

Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in december 2011. Owners may contact daimler trucks toll-free at 1-800-547-0712.

Affected model years

Pages for each model year show complaints, parts, mileage and other recalls.

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 29, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.