2008 Saturn Vue Hybrid Technical Service Bulletins

152 technical service bulletins (TSBs) are on record for the 2008 Saturn Vue Hybrid. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10237387May 30, 2023Transmission and drivetrain. This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
• 10237340May 22, 2023Wheels. This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel).
• 10235799Apr 27, 2023Wheels. This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
• 10235802Apr 24, 2023Engine cooling. This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
• 10235716Apr 21, 2023Wheels. This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel).
• 10234620Apr 6, 2023Equipment. This service bulletin provides information on proper use of floor mats.
• 10234619Apr 6, 2023Transmission and drivetrain. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
• 10234141Mar 23, 2023Engine cooling. This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
• 10234110Mar 17, 2023Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10232287Feb 21, 2023Equipment. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10232136Feb 15, 2023Exterior lighting. This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
• 10231302Jan 20, 2023Equipment. This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
• 10228906Dec 21, 2022Equipment. This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
• 10227674Nov 29, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10224820Oct 7, 2022Equipment. This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
• 10222777Sep 16, 2022Steering, Suspension, Brakes, Engine cooling, Transmission and drivetrain. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
• 10222776Sep 16, 2022Electrical system. The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10222770Sep 16, 2022Transmission and drivetrain, Engine cooling. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
• 10222766Sep 16, 2022Fuel system, Engine cooling. This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
• 10222796Sep 14, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10222772Sep 14, 2022Engine cooling. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
• 10222765Sep 14, 2022Fuel system, Engine cooling. This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
• 10222733Sep 14, 2022Equipment. This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10222739Sep 13, 2022Engine cooling, Fuel system. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 10222734Sep 13, 2022Engine cooling. This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 10214869Jun 15, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10211658May 2, 2022Equipment, Engine. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
• 10210543Apr 13, 2022Equipment. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10209980Mar 31, 2022Engine cooling. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10209921Mar 22, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10210321Mar 7, 2022Tires, Wheels. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10184105Nov 11, 2020Tires, Wheels. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10160666Apr 15, 2019Electrical system. This Preliminary Information communication provides information to the technician that First Responder Guides for General Motors vehicles can be accessed via the web at http://www.gmstc.com. or http://www.nfpa.org/
• 10190338Oct 1, 2017Equipment. Essential Tools that Include Consumable Parts (U.S. Only)
• 10190337Oct 1, 2017Suspension. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
• 10190320Oct 1, 2017Equipment, Electrical system. IPC Odometer Programming Method Quick Reference Guide
• 10113383Feb 20, 2017Equipment. 44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082506Aug 26, 2016Equipment. This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
• 10083080Aug 15, 2016Engine cooling. This preliminary information communication provides information to the technician about vehicles that may have low oil pressure message. Technician may also find a diagnostic trouble code p0521 in the engine control module. Technician should follow all published service information diagnosis.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10082363Aug 12, 2016Equipment. This warranty administration bulletin provide policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10083898Apr 27, 2016Electrical system, Equipment. This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
• 10083513Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.

← All problems reported for the 2008 Saturn Vue Hybrid