2000 Toyota 4RUNNER Technical Service Bulletins

75 technical service bulletins (TSBs) are on record for the 2000 Toyota 4RUNNER. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10109404Oct 16, 2014Transmission and drivetrain. TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
• 10109492Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
• 10132715Jul 25, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132721Jul 7, 2014Other or unknown. TSB: OBSOLETE NOTICE: July 7, 2014: This bulletin is now obsolete.
• 10132708Jul 7, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132812May 1, 2014Back-over prevention (rear camera), Engine. Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
• 10131928Feb 5, 2014Brakes, Equipment. A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general tips for the inspection and/or installation of Toyota Complete Maintenance Care (TCMC) front brake pads and discs. Always refer to the model specific Repair manual and TIS…
• 10131961Jan 14, 2014Air bags. Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
• 10131993Dec 19, 2013Visibility (wipers, defrost, mirrors). This bulletin is now obsolete. Please see T-SB-0185-13.
• 10131988Dec 19, 2013Visibility (wipers, defrost, mirrors). The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
• 10132055Nov 4, 2013Air bags, Seats, Equipment. Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in…
• 10132084Oct 1, 2013Transmission and drivetrain. The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
• 10131984Sep 9, 2013Equipment, Brakes. A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
• 10061620Sep 9, 2013Brakes. Summary to be provided on a future date.
• 10062051Aug 1, 2013Equipment. Summary to be provided on a future date.
• 10132295Apr 23, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0054-13.
• 10132287Apr 23, 2013Equipment. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
• 10061567Apr 23, 2013Engine cooling. Summary to be provided on a future date.
• 10061609Sep 6, 2011Equipment. Summary to be provided on a future date.
• 10042555Sep 6, 2011Air bags, Seats. Toyota: information provided for replacing the seat covers for vehicles equipped with side airbags.
• 10061578Jun 13, 2011Transmission and drivetrain. Summary to be provided on a future date.
• 10015867Mar 18, 2005Engine cooling. '99 4runner engine (3rz-fe) repair manual correction. *tt '00 4runner. 00400-rm720-u1.
• 10011809Nov 23, 2004Exterior lighting. The accessory fog lights for 1999-2002 model year 4runner vehicles may become corroded and not function. The lights should be replaced as a pair.
• 10197476May 4, 2001Equipment. Replacement vin plates.
• 10197473Jan 18, 1991Equipment. Product general information.

← All problems reported for the 2000 Toyota 4RUNNER