2026 Toyota C-HR Technical Service Bulletins

19 technical service bulletins (TSBs) are on record for the 2026 Toyota C-HR. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 11036131Jul 22, 2026Engine. State of Health (SOH): An estimate of battery health that is updated as the vehicle learns from operating and charging conditions over time. Distance Since Last Update: Indicates the distance accumulated since the last SOH calculation. A default mileage value of 40,727 at SOH 100% may be displayed until sufficient vehicle learning is completed. Once SOH value updates from 100%, the Distance Since Last Update value…
• 11036124Jul 13, 2026Engine. Some 2026 model year bZ, bZ Woodland, and C-HR BEV vehicles may exhibit the Diagnostic Trouble Code (DTC) U255221F associated with the level 3 DC fast charging. Under certain conditions, charging may either operate normally or experience failure, with a charging malfunction message displayed on the Multi-Information Display (MID). This condition is attributed to a control logic issue and potential voltage drop…
• 11034826Jun 25, 2026Other or unknown. 2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seatfloor mats to the vehicle…
• 11034819Jun 18, 2026Other or unknown. During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
• 11034813Jun 10, 2026Other or unknown. A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
• 11034812Jun 10, 2026Other or unknown. Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be performed to minimize vehicle component/part degradation due to extendedvehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Any problems that are found should be corrected immediately.
• 11029890Feb 12, 2026Other or unknown. OBSOLETE NOTICE February 12, 2026: This bulletin is now obsolete. Please see T-SB-0005-26.
• 11029888Feb 12, 2026Other or unknown. Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: •Careful inspection for paint chips/scratches and body dents/dings. •Proper operation of electrical accessories (including interior light, clock, and radio reset). •Interior cleanliness. •Proper function of mechanical systems. The PDS…
• 11029879Feb 6, 2026Other or unknown. A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
• 11029878Feb 6, 2026Other or unknown. OBSOLETE NOTICE February 6, 2026: This bulletin is now obsolete. Please see L-SB-0009-25.
• 11029876Feb 5, 2026Other or unknown. During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
• 11029872Feb 3, 2026Other or unknown. OBSOLETE NOTICE February 03, 2026: This bulletin is now obsolete. Please see T-SB-0003-26.
• 11029871Feb 2, 2026Other or unknown. 2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats.
• 11028725Jan 30, 2026Other or unknown. OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0002-26.
• 11028723Jan 28, 2026Other or unknown. Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Any problems that are found should be corrected immediately.
• 11026317Nov 18, 2025Other or unknown. A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
• 11026316Nov 18, 2025Other or unknown. Long-term or off-site storage requires special care to maintain vehicle condition. The guidelines included should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Any problems that are found should be corrected immediately.
• 11026315Nov 18, 2025Other or unknown. 2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats.
• 11026314Nov 18, 2025Other or unknown. During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.

← All problems reported for the 2026 Toyota C-HR