2013 Toyota Highlander Technical Service Bulletins

369 technical service bulletins (TSBs) are on record for the 2013 Toyota Highlander. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10062053Jul 25, 2013Body and structure. Summary to be provided on a future date.
• 10132267Jul 17, 2013Equipment. Some MY 2012-2013 Highlander, highlander HV, Tacoma, and Venza vehicles may exhibit a condition where the Bluetooth mobile device ringtone volume is stuck at MAX VOLUME and cannot be adjusted after pairing a mobile device.
• 10075955Jul 17, 2013Electrical system. Some MY 2012-2013 Highlander, Highlander HV, Tacoma, and Venza vehicles may exhibit a condition where the Bluetooth mobile device ringtone volume is stuck at MAX VOLUME and cannot be adjusted after pairing a mobile device
• 10062052Jul 17, 2013Equipment. Summary to be provided on a future date.
• 10132239Jul 11, 2013Equipment. The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
• 10061589Jul 11, 2013Equipment. Summary to be provided on a future date.
• 10132048May 22, 2013Tires. Please refer to the following recommendations for the best practices for vehicle tire rotations.
• 10062016May 22, 2013Tires. Summary to be provided on a future date.
• 10132047May 14, 2013Equipment. When diagnosing audio, navigation, and Bluetooth concerns on Toyota vehicles equipped with Premium Display Audio with Entune, adhere to the guidelines listed below.
• 10132046May 14, 2013Equipment. On some Highlander, Sienna, and Sequoia vehicles, a plastic clamp connecting the rear A/C lines may become loose. This may allow separation of the A/C lines and a loss of refrigerant.
• 10062048May 14, 2013Equipment. Summary to be provided on a future date.
• 10062046May 14, 2013Equipment. Summary to be provided on a future date.
• 10132291Apr 29, 2013Equipment. Toyota models equipped with the Display Audio Navigation System require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote, and system software. The SST is used with all the vehicles to deliver the update, however a unique Activation Number is required for each vehicle.
• 10132295Apr 23, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0054-13.
• 10132287Apr 23, 2013Equipment. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
• 10132319Apr 15, 2013Electrical system. Technicians should confirm the following key points to minimize the potential for future MIL "ON" concerns after HV battery replacement.
• 10132316Apr 4, 2013Equipment. Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.
• 10132281Apr 4, 2013Body and structure, Back-over prevention (rear camera). If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.
• 10062044Apr 4, 2013Equipment. Summary to be provided on a future date.
• 10133797Mar 26, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0051-13.
• 10133795Mar 26, 2013Equipment. 2012-2013 model year vehicles equipped with a Display Audio Navigation System and Entune (version less than 2.2.0) may exhibit one or more of the following conditions.
• 10061564Mar 26, 2013Equipment. Summary to be provided on a future date.
• 10133809Mar 25, 2013Engine. Starting with 2010 Model Year, Toyota began a gradual transition to the use of synthetic 0W-20 viscosity engine oil. There a re man benefits of this oil.
• 10062010Mar 25, 2013Equipment. Summary to be provided on a future date.
• 10133786Mar 15, 2013Engine. Immediately following a cold soak startup, some 2009 ? 2013 model year vehicles equipped with 1AR-FE or 2AR-FE engines may exhibit a brief knock/rattle noise from the engine compartment for approximately one second. Follow the repair procedure below to address this condition.
• 10061557Mar 15, 2013Engine. Summary to be provided on a future date.
• 10054846Mar 15, 2013Engine. Toyota: on certain vehicles, a knock or rattle noise, coming from engine compartment, is heard during a cold soak startup, and the condition lasts approximately one second. Model years 2009-2012 camry, highlander, sienna, venza, rav4.
• 10053959Mar 15, 2013Engine. Toyota: there is a knocking or rattling noise coming from engine compartment, for a short period of time, after a cold soak startup. Model 2010-2012 camry, 2009-2013 highlander, venza, 2009-2012 rav4, 2011-2013 sienna.
• 10133860Feb 27, 2013Electrical system. The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.
• 10133857Feb 25, 2013Steering. The vehicle will not start or ready-on and the steering wheel lock is engaged so that the steering wheel may only be turned very little from side-to-side.
• 10062035Feb 25, 2013Steering. Summary to be provided on a future date.
• 10133837Feb 21, 2013Steering. Some 2008 ? 2013 model year Highlander and Highlander HV vehicles may exhibit a clunk, pop, or knock-type noise when turning the steering wheel left or right. A new intermediate shaft has been developed to address this condition. Use the following repair procedure to remove and replace the steering intermediate shaft.
• 10075792Feb 21, 2013Steering. Summary to be provided on a future date.
• 10133836Feb 20, 2013Transmission and drivetrain. This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.
• 10133835Feb 19, 2013Equipment. Some customers may inquire about the frequency and power output of the Smart Key/Smart Entry systems used on various models. The Smart Key/Smart Entry systems conform to all applicable FCC rules. This bulletin details the applicable specifications for these systems.
• 10061549Feb 19, 2013Electrical system. Summary to be provided on a future date.
• 10133867Feb 7, 2013Equipment. SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.
• 10133928Jan 29, 2013Equipment. This communication pertains to a current safety recall being conducted by the Southeast Toyota Distributors LLC (SET). TMS is sending this communication for informational purposes in the event you are contacted by a customer covered by this recall.
• 10133901Jan 29, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0012-13.
• 10133897Jan 29, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the TIS and the CUW.
• 10133894Jan 16, 2013Equipment. Three NEW application have been developed to enhance the Entune experience in vehicles equipped with the Display Audio Navigation System with Entune. All customers with these vehicles have been shipped instructions on this update along with a USB drive to install the new applications. In the event that a customer requests the install be performed by a technician, follow the procedures in this bulletin to perform…
• 10133893Jan 16, 2013Electrical system. Use the following procedures to check and/or update the software version of Entune/Navigation for Non-HDD Type Units.
• 10133892Jan 16, 2013Equipment. Vehicles equipped with a Display Audio Navigation System and Entune (version less than 2.1.0) may exhibit one or more of the following conditions.
• 10133917Jan 10, 2013Electrical system. technicians should confirm the following key points to minimize the potential for future MIL "ON" concerns after HV Battery Replacement.
• 10133890Jan 10, 2013Equipment. Some 2013 model year vehicles are equipped with a Smart Key system, which allows the customer to enter and start the vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected during Pre-Delivery Service (PDS). The following inspection procedure has been developed to confirm the proper operation of the Smart Key…
• 10133889Jan 10, 2013Equipment. 2013 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate installation procedure to attach the driver?s side, and if applicable, the passenger?s side and rear seat floor mats to the vehicle carpet using the floor…
• 10133888Jan 10, 2013Tires. The purpose of this bulletin is to provide a procedure to adjust tire pressure correctly when outside temperature is significantly colder or warmer than shop temperature. Seasonal temperature change can dramatically alter tire pressure, which can cause the tire pressure warning lamp to illuminate.
• 10133882Jan 8, 2013Electrical system. Toyota models equipped with the display Audio HDD Navigation System Require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote, and system software. The SST is used with all vehicles to deliver the update, however a unique Activation Number is required for each vehicle. Activation numbers are provided in an ACN pamphlet available through the normal parts ordering system.
• 10060834Jan 8, 2013Equipment. Summary to be provided on a future date.
• 10060833Jan 8, 2013Equipment. Summary to be provided on a future date.

← All problems reported for the 2013 Toyota Highlander