2013 Toyota Yaris Technical Service Bulletins

211 technical service bulletins (TSBs) are on record for the 2013 Toyota Yaris. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10109493Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to assist in the identification and location of serial numbers on 2006 - 2014 model year automatic transmissions.
• 10109492Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
• 10109588Aug 19, 2014Engine, Engine cooling. Tech Tip: Customer may complain about a belt squeal or squeak type noise from the drive belt area. Typically this condition occurs during cold engine start up.
• 10061271Aug 19, 2014Engine, Equipment. Summary to be provided on a future date.
• 10132742Jul 29, 2014Electrical system, Visibility (wipers, defrost, mirrors). Tech Tip: Tips for writing a DPR (Dealer Product Report) on manufacturing issues for windows and windshields.
• 10132715Jul 25, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132741Jul 8, 2014Engine. Tech Tip: Starting with the 2010 Model Year, Toyota began a gradual transition to the use of synthetic 0w20 viscosity engine oil. There are multiple benefits of this oil including: Reduced friction and wear on engine surfaces, Improved fuel economy, Reduction in waste oil stream (in vehicles approved for 10,000 mile oil change intervals), Reduced maintenance cost (in vehicles approved for 10,000 mile oil change…
• 10132708Jul 7, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132762Jun 12, 2014Electrical system. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW).
• 10132812May 1, 2014Back-over prevention (rear camera), Engine. Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
• 10131826Apr 28, 2014Engine cooling. Some vehicles in particular geographic areas may exhibit a condition where the HVAC Evaporator Drain Hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is now available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper…
• 10131933Feb 28, 2014Equipment. Customer complains of Bluetooth connectivity concerns such as: Difficulty to pair phone, Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their…
• 10131928Feb 5, 2014Brakes, Equipment. A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general tips for the inspection and/or installation of Toyota Complete Maintenance Care (TCMC) front brake pads and discs. Always refer to the model specific Repair manual and TIS…
• 10131927Feb 4, 2014Engine. Starting with the 2010 Model Year, Toyota began a gradual transition to the use of synthetic 0w-20 viscosity engine oil. There are multiple benefits of this oil. Due to the improved performance and durability of 0w-20 synthetic oil, Toyota has extended the oil change intervals to 10,000 miles for most vehicle that require this oil.
• 10131951Jan 23, 2014Tires. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur.
• 10131961Jan 14, 2014Air bags. Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
• 10131993Dec 19, 2013Visibility (wipers, defrost, mirrors). This bulletin is now obsolete. Please see T-SB-0185-13.
• 10131988Dec 19, 2013Visibility (wipers, defrost, mirrors). The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
• 10132055Nov 4, 2013Air bags, Seats, Equipment. Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in…
• 10132136Oct 23, 2013Visibility (wipers, defrost, mirrors). The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
• 10132137Oct 2, 2013Equipment, Engine cooling. If a customer states there is an unpleasant odor in the vehicle from the HVAC system, there are various factors that may be involved.
• 10132131Oct 2, 2013Engine. Due to the improved performance and durability of 0w-20 synthetic oil, Toyota has extended the oil change intervals to 10,000 miles for most vehicles that require this oil. With this change, the following should be noted
• 10132084Oct 1, 2013Transmission and drivetrain. The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
• 10062063Sep 27, 2013Equipment. Summary to be provided on a future date.
• 10062062Sep 26, 2013Equipment. Summary to be provided on a future date.
• 10062013Sep 13, 2013Equipment. Summary to be provided on a future date.
• 10131985Sep 12, 2013Equipment. Some 2004 ? 2014 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
• 10131984Sep 9, 2013Equipment, Brakes. A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
• 10062009Aug 2, 2013Equipment. Summary to be provided on a future date.
• 10132269Jul 25, 2013Visibility (wipers, defrost, mirrors). Tips for writing a DPR (Dealer Product Report) on manufacturing issues for windows and windshields.
• 10062053Jul 25, 2013Body and structure. Summary to be provided on a future date.
• 10132239Jul 11, 2013Equipment. The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
• 10061589Jul 11, 2013Equipment. Summary to be provided on a future date.
• 10133668Jun 5, 2013Visibility (wipers, defrost, mirrors), Equipment, Electrical system. Some 2012 ? 2013 model year Yaris Hatchback vehicles may exhibit a condition where a piece of foam that fits between the instrument panel and the windshield may come loose. Parts have been revised to address this condition.
• 10074178Jun 5, 2013Visibility (wipers, defrost, mirrors). Summary to be provided on a future date.
• 10061584Jun 5, 2013Visibility (wipers, defrost, mirrors), Body and structure. Summary to be provided on a future date.
• 10132048May 22, 2013Tires. Please refer to the following recommendations for the best practices for vehicle tire rotations.
• 10062016May 22, 2013Tires. Summary to be provided on a future date.
• 10132295Apr 23, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0054-13.
• 10132287Apr 23, 2013Equipment. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
• 10132281Apr 4, 2013Body and structure, Back-over prevention (rear camera). If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.
• 10133809Mar 25, 2013Engine. Starting with 2010 Model Year, Toyota began a gradual transition to the use of synthetic 0W-20 viscosity engine oil. There a re man benefits of this oil.
• 10062010Mar 25, 2013Equipment. Summary to be provided on a future date.
• 10133901Jan 29, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0012-13.
• 10133897Jan 29, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the TIS and the CUW.
• 10133890Jan 10, 2013Equipment. Some 2013 model year vehicles are equipped with a Smart Key system, which allows the customer to enter and start the vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected during Pre-Delivery Service (PDS). The following inspection procedure has been developed to confirm the proper operation of the Smart Key…
• 10133889Jan 10, 2013Equipment. 2013 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate installation procedure to attach the driver?s side, and if applicable, the passenger?s side and rear seat floor mats to the vehicle carpet using the floor…
• 10133888Jan 10, 2013Tires. The purpose of this bulletin is to provide a procedure to adjust tire pressure correctly when outside temperature is significantly colder or warmer than shop temperature. Seasonal temperature change can dramatically alter tire pressure, which can cause the tire pressure warning lamp to illuminate.
• 10133915Jan 3, 2013Air bags. Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
• 10133878Jan 2, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates…

← All problems reported for the 2013 Toyota Yaris