2001 Workhorse W22 Recalls

NHTSA lists 3 recall campaigns for the 2001 Workhorse W22. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 09V110000Apr 3, 200948,876 vehicles potentially affected
  Service brakes, hydraulic
  Covers: Workhorse W22 2001–2008, Tiffin Allegro BAY 2001–2009, Forest River Georgetown 2000–2006, 2008 +7 more

  Reported issue: Navistar is recalling certain model year my 2001-2008 workhorse w20, w21 and w22 chassis and certain model year 2009 through 2011 monaco rv admiral, arista, monarch, and riptide recreational vehicles equipped with axles that include bosch zops or zoht pin slide hydraulic disc brakes. When combined with occasional or seasonal vehicle operation may experience calipers sticking in the applied position. This can result…

  Possible consequence: The temperature increase at the wheel end can eventually lead to soft pedal conditions due to brake fluid boil, and possible extended stopping distance increasing the risk of a crash.

  Remedy: Workhorse dealers will replace all four bosch brake caliper assemblies free of charge. The safety recall began on september 16, 2010. Owners may contact workhorse at 1-877-246-7731.

  Full campaign details →

• 04V084000Feb 18, 200410,235 vehicles potentially affected
  Service brakes, hydraulic
  Covers: Workhorse W22 2000–2002, W20 2000–2002

  Reported issue: On certain motorhome chassis equipped with bosch zops, the pads can drag on the rotor surface due to the pin slide.

  Possible consequence: A hang up or lock up may cause the calipers to over heat and not allow the driver to stop safely. This could cause overheating of the brake calipers which could result in a vehicle fire.

  Remedy: Dealers will inspect, repair and replace according to the procedure developed by bosch (see campaign 03e064000). The recall began on august 1, 2004. Owners should contact workhorse at 1-877-294-6773.

  Full campaign details →

• 01V317000Oct 4, 20015,011 vehicles potentially affected
  Suspension › Rear › Springs › Leaf spring assembly › U-bolt, leaf spring to axle
  Covers: Workhorse W22 2001, P320032 2001, W20 2001 +1 more

  Reported issue: Vehicle description: motor home and commercial chassis. The rear axle u-bolts may not be tightened correctly due to random failure of production tooling in the specified time span.

  Possible consequence: Low u-bolt torque can result in u-bolts coming loose and not properly retaining the rear axle to the vehicle, resulting in a loss of vehicle control.

  Remedy: Dealers will tighten the rear axle u-bolts. Owner notification is expected to begin october 10, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact workhorse at 1-877-946-7731.

  Full campaign details →

← All problems reported for the 2001 Workhorse W22