2013 Audi A4 Allroad Technical Service Bulletins

893 technical service bulletins (TSBs) are on record for the 2013 Audi A4 Allroad. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10067709Oct 20, 2014Electrical system. Summary to be provided on a future date.
• 10124760Oct 17, 2014Equipment. Supersedes Technical Service Bulletin Group 87 number 13-46 dated October 21, 2013. The A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
• 10124758Oct 17, 2014Engine cooling. Supersedes Technical Service Bulletin Group 66 number 14-42 dated October 9, 2014. The paint is flaking off of the radiator grille or front license plate holder. The surfaces of these components were too smooth (due to high-gloss polishing tools), which led to weak adhesion of the paint during production. Only components with color index T94 are affected.
• 10066337Oct 17, 2014Equipment. Summary to be provided on a future date.
• 10124745Oct 16, 2014Equipment. Supersedes Technical Service Bulletin Group 91 number 14-24 dated January 24, 2014. The Audi MMI system will not play audio files from an SD card. The MMI system does not recognize the audio files on the SD card. The MMI system reports that the audio files on the SD card are damaged. The audio files on the SD card will play on one Audi vehicle, but will not play on a different Audi vehicle. The vehicle is equipped…
• 10124744Oct 16, 2014Equipment. Supersedes Technical Service Bulletin Group 91 number 13-85 dated May 29, 2013. The iPod or the USB memory stick is not recognized or the iPod is not charged when either unit is connected to the Audi music interface (AMI). MMI3G or a Symphony/Concert CAN radio system with separate AMI control unit in the glove box or armrest. MMI3G+ with integrated AMI in the MMI main unit.
• 10124718Oct 15, 2014Engine cooling. The engine warning light is on after engine replacement. The engine is not running roughly. However, fault codes are stored in the engine control module (ECM). The fault codes occur at light load, between 8% and 14% accelerator pedal position. The programmed values for the misfire adaption are not automatically reset when the memory is deleted. The adaption must be reset after the engine is installed.
• 10124705Oct 15, 2014Equipment. This Update has been proactively released to prevent the following condition from occurring in the vehicle. On Audi vehicles manufactured within a specific period, the refrigerant pressure sensor for the air conditioner may fail after a period of time. As a result, the air conditioner compressor is switched off. This Update is in effect until removed.
• 10124706Oct 14, 2014Equipment. This Update has been proactively released to prevent the following condition from occurring in the vehicle. On Audi vehicles manufactured within a specific period, the refrigerant pressure sensor for the air conditioner may fail after a period of time. As a result, the air conditioner compressor is switched off. This Update is in effect until removed.
• 10124751Oct 12, 2014Wheels. Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
• 10124759Oct 9, 2014Equipment. Customer may report poor A/C performance or that A/C is inoperative. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information on the DTC codes for the vehicles listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any…
• 10124757Oct 9, 2014Engine cooling. The paint is flaking off of the radiator grille or front license plate holder. The surfaces of these components were too smooth (due to high-gloss polishing tools), which led to weak adhesion of the paint during production. Only components with color index T94 are affected.
• 10124750Oct 9, 2014Suspension. Supersedes Technical Service Bulletin Group 40 number 14-42 dated July 8, 2014. A rattling or knocking noise is heard when the car is driven over bumps or uneven road surfaces. This noise is heard after the car has been driven for a while and is warmed up, and when the temperature outside is warm. This condition can be duplicated if the brakes are applied while the car is being driven over bumpy roads. This…
• 10124747Oct 9, 2014Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 14-24 dated May 1, 2014. A jerky accelerator response is felt when the vehicle is pulled away from a stop in reverse. Incorrect calibration of clutch program.
• 10124721Oct 9, 2014Engine cooling. Supersedes Technical Service Bulletin Group 20 number 14-34 dated June 26, 2014. MIL on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
• 10066363Oct 9, 2014Equipment. Summary to be provided on a future date.
• 10066336Oct 9, 2014Equipment. Summary to be provided on a future date.
• 10066025Oct 9, 2014Brakes. Summary to be provided on a future date.
• 10124742Oct 7, 2014Exterior lighting. A headlight system warning may be illuminated in the instrument cluster. Headlight range control inoperative. Xenon high beam shutter inoperative on one side (low beam functioning). Diagnosis of the concern indicates that the headlight is at fault. Connector in the headlight is not properly seated.
• 10066443Oct 7, 2014Exterior lighting. Summary to be provided on a future date.
• 10056903Oct 7, 2014Exterior lighting. Audi: in the instrument cluster will illuminate with headlight system warning and have xenon high beam shutter inoperative on just one side and range control is inoperative. Model 2013-14 a4.
• 10124763Oct 2, 2014Electrical system, Equipment. Supersedes Technical Service Bulletin Group 91 number 13-08 dated September 20, 2013. The customer would like to add a different navigation map database for countries outside of the USA or Canada. The customer would like to change the MMI system language to a different language that is not already supported by MMI.
• 10124723Oct 2, 2014Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 12-65 dated September 25, 2012. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced. No faults are stored. TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in…
• 10124808Sep 26, 2014Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 14-42 dated August 1, 2014. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs are stored in the transmission control module (TCM).
• 10066015Sep 26, 2014Electrical system. Summary to be provided on a future date.
• 10124806Sep 23, 2014Visibility (wipers, defrost, mirrors). Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
• 10124798Sep 12, 2014Visibility (wipers, defrost, mirrors). Supersedes Technical Service Bulletin Group 92 number 14-08 dated August 19, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank.
• 10124823Sep 10, 2014Equipment. Customer vehicle is fitted with unauthorized ECM tuning. All systems on Audi vehicles are engineered to work together using the factory calibrations, which have been extensively tested and validated before the vehicle is released for sale. The Audi warranty coverage is based on the results of developing the vehicle under the factory calibration.
• 10124816Sep 9, 2014Electrical system. DTC P045600 is stored in the engine control module (ECM), J623 (address word 01). Note that this repair authorization applies only to a specific list of VINs. If this repair authorization does not appear in ELSA when your VIN is entered, it does not apply.
• 10065968Sep 9, 2014Electrical system. Summary to be provided on a future date.
• 10124803Sep 5, 2014Electrical system. Supersedes Technical Service Bulletin Group 91 number 14-53 dated July 24, 2014. MMI 3G+ GPS location is inaccurate (MY13, MY14, & MY15).
• 10124802Sep 5, 2014Electrical system, Equipment. Supersedes Technical Service Bulletin Group 91 number 14-42 dated April 30, 2014. The GPS location or vehicle direction indicated on the navigation map does not match the actual vehicle?s location or actual direction of travel. The condition can happen sporadically or consistently. The condition does not happen during or immediately following the initial PDI inspection (once the vehicle has been taken out of…
• 10066405Sep 5, 2014Equipment. Summary to be provided on a future date.
• 10133234Aug 28, 2014Electrical system, Engine cooling, Fuel system. The engine judders or runs erratically. The vehicle judders during acceleration. No event entry is stored in the engine control module (ECM). The air mass meter is suspected to be faulty. Possible incorrect function on the sensor elements of the air mass meter.
• 10065980Aug 28, 2014Engine. Summary to be provided on a future date.
• 10066308Aug 11, 2014Brakes. Summary to be provided on a future date.
• 10066437Aug 7, 2014Exterior lighting. Summary to be provided on a future date.
• 10066436Aug 4, 2014Exterior lighting. Summary to be provided on a future date.
• 10066010Aug 1, 2014Electrical system. Summary to be provided on a future date.
• 10122524Jul 31, 2014Equipment. Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
• 10122568Jul 30, 2014Equipment. Supersedes Technical Service Bulletin Group 91 number 13-87 dated June 19, 2013. The MMI control knob joystick is loose or has fallen off. Only vehicles with navigation and without MMI touch are affected.
• 10122523Jul 30, 2014Electrical system. A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated. This DTC is normal. It indicates that the parameter data has not been properly programmed into the ECU by SVM.
• 10066402Jul 30, 2014Equipment. Summary to be provided on a future date.
• 10122571Jul 24, 2014Equipment. Supersedes Technical Service Bulletin Group 96 number 13-61 dated May 28, 2013. The sunglass holder in the dome light assembly will not latch closed. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
• 10122566Jul 24, 2014Equipment. Supersedes Technical Service Bulletin Group 91 number 14-41 dated April 30, 2014. MMI 3G+ GPS location is inaccurate (MY14 & MY13).
• 10066400Jul 24, 2014Equipment. Summary to be provided on a future date.
• 10122565Jul 22, 2014Equipment. The customer complains about GPS navigation issues that may be antenna-related. No DTC entry is logged. This bulletin should be performed before any other bulletins that cover specific customer complaints. If the GPS antenna cable became partially connected during assembly or during a repair, it may still function. But, the partially-connected cable can cause an intermittent issue that does not cause a DTC to be…
• 10122549Jul 22, 2014Brakes. Supersedes Technical Service Bulletin Group 46 number 14-76 dated March 25, 2014. The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
• 10066399Jul 22, 2014Equipment. Summary to be provided on a future date.
• 10122531Jul 21, 2014Body and structure. Rattling noises are heard coming from underneath the vehicle. These noises may be a result of contact between an exhaust heat shield and the body of the vehicle.

← All problems reported for the 2013 Audi A4 Allroad