2013 Audi A4 Technical Service Bulletins

662 technical service bulletins (TSBs) are on record for the 2013 Audi A4. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10222011Mar 28, 2013Fuel system. Technical Background: Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel. This causes temporary drops in fuel pressure, causing DTC P008700 (fuel rail pressure too low) to be stored. Freeze frame data will indicate those extreme driving conditions: coolant temperature is above 102? C.
• 10222010Mar 28, 2013Fuel system. Technical Background: Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel. This causes temporary drops in fuel pressure, causing DTC P008700 (fuel rail pressure too low) to be stored. Freeze frame data will indicate those extreme driving conditions: coolant temperature is above 102? C.
• 10226464Mar 27, 2013Air bags, Lane departure. ABS warning light on - wire harness damage
• 10216640Mar 27, 2013Transmission and drivetrain. Engine oil service - filter cartridge replacement. When changing the oil filter and installing the new filter seal(s) in the oil filter housing, special attention is required.
• 10243990Mar 18, 2013Other or unknown. Elsaweb Newsletter
• 10228351Mar 12, 2013Fuel system, Electrical system. Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel.
• 10225030Mar 12, 2013Fuel system. Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel.
• 10222003Mar 12, 2013Fuel system. Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel.
• 10243989Mar 11, 2013Other or unknown. Elsaweb Newsletter
• 10228350Mar 7, 2013Engine cooling. Engine warning light on after engine replacement
• 10225029Mar 7, 2013Engine cooling. Engine warning light on after engine replacement
• 10222002Mar 7, 2013Engine cooling. Engine warning light on after engine replacement
• 10228349Mar 5, 2013Engine cooling, Fuel system. Technical Background: Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel. This causes temporary drops in fuel pressure, causing DTC P008700 (fuel rail pressure too low) to be stored. Freeze frame data will indicate those extreme driving conditions: coolant temperature is above 102? C.
• 10225028Mar 5, 2013Fuel system, Engine cooling. Technical Background: Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel. This causes temporary drops in fuel pressure, causing DTC P008700 (fuel rail pressure too low) to be stored. Freeze frame data will indicate those extreme driving conditions: coolant temperature is above 102? C.
• 10222001Mar 5, 2013Engine cooling. Technical Background: Under extreme driving conditions (e.g. long idle periods or extended stop and go traffic), high temperatures build up in the rail system and can lead to steam bubbles in the fuel. This causes temporary drops in fuel pressure, causing DTC P008700 (fuel rail pressure too low) to be stored. Freeze frame data will indicate those extreme driving conditions: coolant temperature is above 102? C.
• 10226516Mar 4, 2013Electrical system, Transmission and drivetrain. Transmission warning message in cluster, P074100 stored in TCM
• 10226515Mar 4, 2013Transmission and drivetrain, Electrical system, Other or unknown. Harsh downshifts when braking or harsh 1-2 upshift under acceleration
• 10210666Mar 4, 2013Other or unknown, Transmission and drivetrain. The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
• 10250467Feb 26, 2013Lane departure, Air bags. Gearbox warning light briefly comes on. Fault code P0606 stored in TCM
• 10250476Feb 25, 2013Suspension. Model Year 2013 Alignment - Repair Authorization
• 10251023Feb 18, 2013Suspension. Steering wheel shimmy, vibration and/or oscillation
• 10250475Feb 18, 2013Steering. Steering wheel shimmy, vibration and/or oscillation
• 10250464Feb 12, 2013Transmission and drivetrain. Transmission warning message displayed in cluster.
• 10250462Feb 11, 2013Transmission and drivetrain. Gearbox warning light briefly comes on. Fault code P0606 stored in TCM.
• 10250461Feb 7, 2013Transmission and drivetrain. Transmission warning message in cluster (DTC P0603 in TCM)
• 10250460Feb 6, 2013Transmission and drivetrain. Harsh downshifts when braking or harsh 1-2 upshift under acceleration
• 10250459Feb 6, 2013Transmission and drivetrain. Transmission warning message in cluster, P074100 stored in TCM
• 10250458Feb 4, 2013Transmission and drivetrain. Transmission warning message in cluster, P074100 stored in TCM
• 10226514Jan 31, 2013Other or unknown, Transmission and drivetrain. Harsh downshifts when braking or harsh 1-2 upshift under acceleration
• 10210664Jan 31, 2013Transmission and drivetrain, Other or unknown. Customer may report harsh downshifts while braking or harsh 1-2 upshift under acceleration concerns. Further TCM software calibration to improve shift concerns.
• 10216595Jan 23, 2013Equipment. Instruction.
• 10251018Jan 18, 2013Steering. Steering wheel shimmy, vibration and/or oscillation
• 10226510Jan 16, 2013Transmission and drivetrain, Lane departure. Transmission warning message in cluster, P074100 stored in TCM
• 10210660Jan 16, 2013Transmission and drivetrain. DTC P074100 Torque Converter Clutch Circuit Performance or Stuck Off is stored in TCM. Customer may report transmission warning lamp illuminated in instrument cluster.
• 10210625Jan 13, 2013Electrical system, Transmission and drivetrain. There may be clutch mechanism wear. Customer may report that the vehicle does not start or only starts when the clutch pedal is pressed very firmly. The message ?Press clutch pedal to start vehicle? may appear in the instrument cluster.
• 10216682Jan 9, 2013Engine cooling. Engine oils that meet Audi Oil Quality Standards.
• 10226509Jan 8, 2013Transmission and drivetrain, Other or unknown. Harsh downshifts when braking or harsh 1-2 upshift under acceleration
• 10210659Jan 8, 2013Transmission and drivetrain, Electrical system. Further TCM software calibration to improve shift concerns.
• 10250218Jan 7, 2013Equipment. Lineamientos de entrega de Audi
• 10244037Jan 3, 2013Other or unknown. 2013 Scheduled Maintenance Intervals
• 10253414Jan 1, 2013Equipment. Audi Delivery Guidelines.
• 10216602Jan 1, 2013Equipment. Newsletter
• 10216599Jan 1, 2013Equipment. Maintenance.
• 10216597Jan 1, 2013Equipment. Report.
• 10216596Jan 1, 2013Equipment. Newsletter.
• 10250456Dec 19, 2012Transmission and drivetrain. Harsh downshifts when braking or harsh 1-2 upshift under acceleration
• 10250426Dec 6, 2012Transmission and drivetrain. Transmission warning message in cluster.
• 10249095Nov 22, 2012Engine cooling. ECM Software Update (FED_EMS)
• 10212693Nov 20, 2012Lane departure. Transmission warning message in cluster
• 10210640Nov 20, 2012Transmission and drivetrain, Electrical system. Customer may report transmission warning lamp illuminated in instrument cluster. DTC P074100 (Torque Converter Clutch Circuit Performance or Stuck Off) is stored in TCM. Diagnostic error in TCM software.

← All problems reported for the 2013 Audi A4