2014 Audi A4 Technical Service Bulletins

558 technical service bulletins (TSBs) are on record for the 2014 Audi A4. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10250981Jun 26, 2014Tires. Message "TPMS" in instrument cluster
• 10216685Jun 26, 2014Engine cooling. The NVLD pressure switch may erroneously detect a very small leak.
• 10231127Jun 9, 2014Equipment, Electrical system. ElsaPro Software update and technical bulletins
• 10228283Jun 4, 2014Tires, Equipment. Audi Tire Chain Information by Vehicle -- MY 2014
• 10224962Jun 4, 2014Tires. Audi Tire Chain Information by Vehicle -- MY 2014
• 10221935Jun 4, 2014Equipment. Audi Tire Chain Information by Vehicle -- MY 2014
• 10212703May 29, 2014Transmission and drivetrain. Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
• 10228295May 28, 2014Engine cooling. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
• 10226529May 28, 2014Transmission and drivetrain. Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
• 10224974May 28, 2014Engine cooling. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
• 10221947May 28, 2014Engine cooling. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
• 10210679May 28, 2014Transmission and drivetrain, Electronic stability control. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system…
• 10249085May 13, 2014Other or unknown. Google Maps Street View (NVLW))
• 10226540May 5, 2014Suspension. Squealing, howling, or whistling noise from under vehicle when cold
• 10226523May 1, 2014Transmission and drivetrain. Jerky accelerator response in reverse gear
• 10226521May 1, 2014Lane departure, Electrical system, Transmission and drivetrain. Transmission warning message in cluster (P074100 stored in TCM)
• 10210673May 1, 2014Transmission and drivetrain, Electrical system. A jerky accelerator response is felt when the vehicle is pulled away from a stop in reverse. Incorrect calibration of clutch program. New software in the transmission control module (TCM), J217 (address word 02) addressed the condition.
• 10212673Apr 29, 2014Electrical system. Low battery charge: Diagnosis tips and TAC instructions
• 10210621Apr 29, 2014Electrical system. This TSB provides basic diagnosis steps for discharged batteries, general tips for working with batteries, and system verification steps to ensure that the vehicle is configured correctly. For additional information on known current draw issues, refer to the following TSBs: ? 2014127: 27 Battery dead or low after returning to the vehicle (2007 A6, A8, Q7) ? 2019143: 27 Battery discharged on some vehicles with…
• 10231108Apr 28, 2014Electrical system, Engine cooling. 97 no start
• 10231107Apr 21, 2014Equipment. 91 Generation III radio: Loose or broken control knobs
• 10250106Apr 14, 2014Equipment. Elsa newsletter
• 10226433Apr 14, 2014Electrical system. 97 No start (DTC P068A00)
• 10250973Apr 10, 2014Suspension. Noise from rear suspension - Repair Authorization
• 10250672Apr 10, 2014Suspension, Electronic stability control. Noise from rear suspension - Repair Authorization
• 10250179Apr 7, 2014Equipment. Elsa newsletter
• 10243823Apr 3, 2014Visibility (wipers, defrost, mirrors). AC Pressure/Temperature Sensor (NVLW)
• 10231131Apr 3, 2014Equipment. Technical bulletins and updates
• 10216651Apr 3, 2014Back-over prevention (rear camera). The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period…
• 10249053Apr 2, 2014Other or unknown, Engine cooling. AC Pressure/Temperature Sensor
• 10242668Apr 1, 2014Engine cooling. The Audi 2.0L Third Generation TDI Engine
• 10231135Mar 31, 2014Equipment. Technical bulletins and updates
• 10226434Mar 31, 2014Electrical system. 97 No Styart (DTC P068A00)
• 10250991Mar 25, 2014Brakes. Brake noise analysis and handling
• 10216683Mar 24, 2014Engine cooling. The NVLD pressure switch may erroneously detect a very small leak.
• 10231133Mar 17, 2014Equipment. Technical bulletins and updates
• 10226436Mar 13, 2014Electrical system. 97 No start (DTC P068A00)
• 10250987Mar 10, 2014Steering. Steering wheel vibration and/or oscillation at low mileage - Repair Authorization
• 10226435Mar 4, 2014Equipment. 96 Alarm sounds when driver door is unlocked with mechanical key
• 10231120Feb 24, 2014Equipment. Diagnostics and updates
• 10228292Feb 20, 2014Engine cooling. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
• 10224971Feb 20, 2014Engine cooling. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
• 10221944Feb 20, 2014Engine cooling. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
• 10231119Feb 17, 2014Equipment. Technical bulletins and updates
• 10251003Feb 13, 2014Suspension. Rattling or knocking noise from front end when driving over bumps.
• 10250663Feb 13, 2014Suspension. Rattling or knocking noise from front end when driving over bumps
• 10231118Feb 11, 2014Equipment. Windows XP- End of Support (EOS) and new VAS diagnostic services
• 10250993Feb 3, 2014Brakes. Brake noise analysis and handling
• 10231117Feb 3, 2014Equipment. Technical bulletins and updates
• 10228393Jan 31, 2014Electrical system. Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.

← All problems reported for the 2014 Audi A4