2014 Audi A7 Technical Service Bulletins

1,304 technical service bulletins (TSBs) are on record for the 2014 Audi A7. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10121306Oct 7, 2013Electrical system. Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
• 10066920Oct 7, 2013Brakes. Summary to be provided on a future date.
• 10121945Oct 2, 2013Equipment, Body and structure. Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.
• 10249678Oct 1, 2013Equipment. Vehicle condition report
• 10249677Oct 1, 2013Equipment. Vehicle detail report
• 10249673Oct 1, 2013Equipment. Technician report
• 10249671Oct 1, 2013Equipment. Audi delivery guidelines
• 10243918Oct 1, 2013Fuel system, Other or unknown. Audi Oil Capacity Chart
• 10121978Oct 1, 2013Equipment. This document contains the Audi vehicle condition report checklist.
• 10121977Oct 1, 2013Equipment. This document contains the Audi vehicle detail report checklist.
• 10121974Oct 1, 2013Equipment. This document contains the Audi technician report checklist. All items must be completed prior to customer delivery by an Audi technician. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection.
• 10121973Oct 1, 2013Equipment. This document contains the Audi delivery guidelines checklist.
• 10121343Sep 30, 2013Equipment. Supersedes Technical Service Bulletin Group 51 number 13-06 dated August 9, 2013. Instructions for vehicle inspection, protection removal, and detailing.
• 10249104Sep 27, 2013Steering. Power Steering Control Unit Software (NVLW)
• 10121397Sep 27, 2013Steering. When making minor steering movements while driving in a straight line in Audi vehicles with electromechanical power steering manufactured within a specific period, the customer may occasionally perceive slight irregularities with the assistance provided by the power steering. This phenomenon mainly occurs when the temperature is around the freezing point. This is a comfort-related issue; therefore no warning symbol…
• 10121338Sep 27, 2013Suspension, Steering. Supersedes Technical Service Bulletin Group 44 number 13-36 dated February 18, 2013. This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration in one or both of the following…
• 10121387Sep 26, 2013Electrical system. This communication is to inform you of that Update 48K8 has been revised to include a warning to ensure that the Bluetooth function of the scan tool must be physically switched off prior to performing this Update. The revised Update will be visible in ElsaWeb and ServiceNet on or about September 27, 2013. Please ensure your technicians are made aware of this new information.
• 10121358Sep 25, 2013Electrical system. Seat memory function does not work. DTCs are stored. In the event of a voltage fluctuation in the vehicle power system, the software of the seat adjustment module fails.
• 10121345Sep 25, 2013Equipment. Various features in the rear passenger compartment are inoperative. Some features may include power rear windows, rear climate control operating unit, rear sunroof panel, rear reading lamps, rear cigarette lighters, etc. By design, many electronically-controlled features in the rear passenger compartment, in addition to the power rear windows, are deactivated if the child lock in the driver's door is activated.
• 10251007Sep 24, 2013Body and structure. Cracking noises from rear of vehicle
• 10250671Sep 24, 2013Body and structure. Cracking noises from rear of vehicle
• 10121334Sep 24, 2013Body and structure. Supersedes Technical Service Bulletin Group 42 number 12-15 dated October 12, 2012. Cracking or clicking noises are heard from the rear of the vehicle in the C pillar area when it is driven over bumps or rough roads. The noise comes from the upper shock absorber mounting.
• 10066874Sep 24, 2013Suspension. Summary to be provided on a future date.
• 10121365Sep 23, 2013Equipment. Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
• 10121371Sep 20, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 11-28 dated December 9, 2011. Customer is inquiring about retrofitting the MMI system with a language pack or map database outside of factory-available options.
• 10243780Sep 16, 2013Equipment. Audi Elsa Newsletter
• 10121342Sep 13, 2013Wheels, Steering. Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have…
• 10228323Sep 12, 2013Fuel system, Engine cooling. If a model year 2014 Q5 TDI, A6 TDI, A7 TDI, or A8L TDI clean diesel (engine code CPNA or CPNB) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair.
• 10225002Sep 12, 2013Engine cooling, Fuel system. If a model year 2014 Q5 TDI, A6 TDI, A7 TDI, or A8L TDI clean diesel (engine code CPNA or CPNB) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair.
• 10221975Sep 12, 2013Fuel system. If a model year 2014 Q5 TDI, A6 TDI, A7 TDI, or A8L TDI clean diesel (engine code CPNA or CPNB) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair.
• 10121319Sep 12, 2013Transmission and drivetrain. Supersedes Technical Service Bulletin Group 01 number 13-10 dated June 24, 2013. If a model year 2014 Q5 TDI, A6 TDI, A7 TDI, or A8L TDI clean diesel (engine code CPNA or CPNB) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair. This also applies to any messages related to…
• 10065651Sep 12, 2013Fuel system. Summary to be provided on a future date.
• 10121367Sep 11, 2013Electrical system. Supersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
• 10121366Sep 6, 2013Electrical system. Supersedes Technical Service Bulletin Group 91 number 13-94 dated July 24, 2013. The driver?s voice sounds muffled or background noise sounds very loud to other caller during Bluetooth calls. Voice recognition commands are not recognized or voice recognition accuracy is poor. The location of the microphones within the roof module make them susceptible to interference by the vehicle air vents and climate control…
• 10068152Sep 6, 2013Equipment. Summary to be provided on a future date.
• 10121324Sep 5, 2013Engine cooling. Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds…
• 10251021Sep 3, 2013Steering. Steering rack control unit cannot be coded
• 10121336Sep 3, 2013Steering. Supersedes Technical Service Bulletin Group 48 number 12-33 dated October 22, 2012. After replacing the electromechanical steering with the control unit J500, the unit cannot be coded via SVM spec/actual. All new replacement power steering control units (J500) must be coded and parameterized using online SVM spec/actual or an SVM code. If the SVM spec/actual returns a response of ?Check Hardware?, then the SVM code…
• 10214963Sep 1, 2013Equipment. Audi Quick Reference Specification Guide.
• 10205698Sep 1, 2013Equipment. Quick reference specification book.
• 10203511Sep 1, 2013Equipment. Quick reference specification book.
• 10073841Sep 1, 2013Equipment. Summary to be provided on a future date.
• 10124638Aug 30, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing…
• 10124630Aug 28, 2013Equipment. Supersedes Technical Service Bulletin Group 97 number 13-36 dated July 10, 2013. The vehicle alarm activates for no reason and it cannot be turned off. The alarm horn does not work. DTC/fault symptom combinations are found in the comfort system control module. The DTC can be static or sporadic. The wiring harness insulation for the alarm horn can be damaged during the vehicle production assembly.
• 10124592Aug 26, 2013Engine cooling. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. This Update is in effect until removed. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on…
• 10124590Aug 22, 2013Steering. When making minor steering movements while driving in a straight line in Audi vehicles with electromechanical power steering manufactured within a specific period, the customer may occasionally perceive slight irregularities with the assistance provided by the power steering. This phenomenon mainly occurs when the temperature is around the freezing point. This is a comfort-related issue; therefore no warning symbol…
• 10053913Aug 22, 2013Steering, Electrical system. Audi: updated information on power steering control unit software, in some vehicles, with electromechanical power steering, having slight irregularities, manufactured a specific period, mainly occurs when temperature is at freezing point. Model 2012-2014 a4, a5, q5, a6, a7.
• 10124612Aug 21, 2013Steering. This communication is to inform you of upcoming Update 48K8. When making minor steering movements while driving in a straight line in Audi vehicles with electromechanical power steering manufactured within a specific period, the customer may occasionally perceive slight irregularities with the assistance provided by the power steering. This phenomenon mainly occurs when the temperature is around the freezing point…
• 10124657Aug 16, 2013Brakes. Supersedes Technical Service Bulletin Group 46 number 13-53 dated August 7, 2013. Customer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
• 10124645Aug 14, 2013Visibility (wipers, defrost, mirrors). Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.

← All problems reported for the 2014 Audi A7