2019 Audi E-Tron Transmission and drivetrain Problems

“I had 93u9 criteria 04 recall done in February. As of March 6, I had a no power supply message. Without being able to charge it went to the dealer. They said it was the charge port assembly but not from the recall since that was software. Once that was fixed they charged the car and it immediately had the fault electrical malfunction. Now they say i need to replace the rear drive motor. Then thy called again and said the 12v battery needs to be replaced as well. This all happened while still at the dealer. I didn’t have those faults prior, yet they want to say none of its related. …”

“When vehicle is in drive or reverse, it rolls forward and backwards when no throttle is applied (as if in neutral), vehicle hit a structure because it rolled back at a rapid pace due to an incline. Audi needs to implement a feature to prevent the vehicle from rolling when at a near stop and the vehicle is in drive or reverse.”

“Vehicle dangerously rolls backwards on driveway when in drive, the vehicle does not brake hold when in drive or reverse, it will roll either direction freely as if in neutral. Audi needs to release a software update to hold vehicle when rolling opposite direction of selected gear.”

“The high-voltage charging flap assembly (Part 4KE810001) has failed, preventing the charge door from latching. Notably, this failure (DTC P31D000) occurred within 7 days of the vehicle being serviced at Audi Burlingame for a high-voltage battery software recall. This presents three safety hazards: 1. Driver Distraction: Triggers a continuous auditory chime and 'Warning! Please check the charging unit cover' message every 10 seconds. It cannot be silenced, creating a severe, persistent distraction. 2. …”

“Vehicle rolls freely in drive and reverse, very dangerous because it is difficult to control on hills and steep driveways. The vehicle will roll in either direction regardless of selected gear with no safety system to keep the vehicle in hold .”