2014 Audi Q7 Technical Service Bulletins

1,122 technical service bulletins (TSBs) are on record for the 2014 Audi Q7. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10073844Sep 1, 2013Equipment. Summary to be provided on a future date.
• 10124650Aug 30, 2013Steering. Supersedes Technical Service Bulletin Group 48 number 10-09 dated August 13, 2010. Electric steering column adjustment is restricted or does not work at all. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently…
• 10124638Aug 30, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing…
• 10124652Aug 28, 2013Steering. Supersedes Technical Service Bulletin Group 48 number 13-43 dated April 19, 2013. The customer may report that the Easy Entry function of the power adjustable steering column intermittently does not work.
• 10124592Aug 26, 2013Engine cooling. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. This Update is in effect until removed. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on…
• 10124645Aug 14, 2013Visibility (wipers, defrost, mirrors). Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
• 10124609Aug 14, 2013Engine cooling. This communication is to inform you of a revision to Update 24Z6. The revision is in regards to the manifold actuator.
• 10124633Aug 13, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 55 number 13-31 dated July 18, 2013. The customer may report that the tail lamp lighting does not switch over from bumper to the lid, with lid closed. The rear bumper lights function normally (brake lights, reverse lights, driving lights, turn signals). The center mount brake light functions normally. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in…
• 10124632Aug 13, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 94 number 13-24 dated July 18, 2013. There is considerable moisture present in the headlamp. The moisture disappears only after extended drives (greater than 10 minutes). There is no external damage to the headlamp which could introduce moisture.
• 10124649Aug 9, 2013Equipment. Supersedes Technical Service Bulletin Group 00 number 11-23 dated June 3, 2011. Instructions for vehicle inspection, protection removal, and detailing.
• 10124629Aug 8, 2013Electrical system, Exterior lighting. The customer may report two or more warning lights are/were illuminated simultaneously. The warning lights may be sporadic, and may not be illuminated by the time the customer brings the vehicle to the workshop. CAN communication DTCs may be found in control modules. There is sporadic data disruption on the CAN bus wiring behind the dashboard, between the left (T46a) and right (T46b) 46-pin CAN disconnect plugs.
• 10124593Aug 6, 2013Engine cooling. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. This Update is in effect until removed. Procedure is valid only for vehicles that show the 24Z6 code in the ElsaWeb Campaign/Action Information screen…
• 10124614Aug 5, 2013Engine cooling. This communication is to inform you of upcoming Update 24Z6. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. Install new manifold actuators.
• 10124648Aug 1, 2013Latches, locks and linkages. Supersedes Technical Service Bulletin Group 57 number 11-49 dated August 8, 2011. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle "locked itself". The lock command history is stored in the convenience system control module (J393).
• 10124599Aug 1, 2013Equipment. This document contains the fluid capacity chart.
• 10124581Jul 30, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 12-38 dated March 2, 2012. When a phonebook with a large number of contacts is being downloaded, the MMI screen freezes in one of the following scenarios: * After the initial Bluetooth connection (shortly after the phone is bonded to the vehicle), the screen freezes briefly. * After the ignition is switched on (shortly after the phone automatically reconnects…
• 10243791Jul 29, 2013Equipment. Audi Elsa Newsletter
• 10243790Jul 22, 2013Equipment. Audi Elsa Newsletter
• 10226502Jul 19, 2013Vehicle speed control. Rough gear changes both when accelerating and slowing down
• 10226467Jul 19, 2013Equipment. HomeLink Garage Door Opener Cannot be Erased or Programmed
• 10210652Jul 19, 2013Transmission and drivetrain, Electrical system. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these…
• 10124571Jul 19, 2013Equipment. The garage door opener cannot be programmed. The programming mode cannot be activated. The garage door programming cannot be erased. The method for erasing the Homelink programmed button memory is incorrectly described in the owner's manual. The incorrect description in the owner's manual is: "Erasing the buttons" Press and hold both of the outer buttons until the LED (A) turns off completely (about 20 seconds) to…
• 10124499Jul 19, 2013Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch…
• 10068728Jul 19, 2013Equipment. Summary to be provided on a future date.
• 10124576Jul 18, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 94 number 13-20 dated July 3, 2013. There is considerable moisture present in the headlamp. The moisture disappears only after extended drives (greater than 10 minutes). There is no external damage to the headlamp which could introduce moisture.
• 10124514Jul 18, 2013Electrical system. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly. When the rear lid is opened, the paddle switches change state and the comfort system…
• 10068714Jul 18, 2013Exterior lighting. Summary to be provided on a future date.
• 10066955Jul 18, 2013Body and structure. Summary to be provided on a future date.
• 10124525Jul 16, 2013Equipment, Electrical system. Supersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android…
• 10250121Jul 13, 2013Equipment. Audi Delivery Guidelines
• 10251020Jul 12, 2013Suspension. Alignment - Repair Authorization
• 10124577Jul 12, 2013Electrical system. Supersedes Technical Service Bulletin Group 94 number 13-17 dated May 22, 2013. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly.
• 10124504Jul 12, 2013Steering. Supersedes Technical Service Bulletin Group 44 number 13-37 dated February 25, 2013. Vehicle pulls - left or right. Steering wheel not leveled or off-center. In some cases both concerns may be reported. the alignment concern is due to outside influence (e.g. accident), this TSB does not apply.
• 10068713Jul 12, 2013Body and structure. Summary to be provided on a future date.
• 10124574Jul 10, 2013Equipment. Supersedes Technical Service Bulletin Group 96 number 12-37 dated June 11, 2012. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer's door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener…
• 10124489Jul 9, 2013Engine, Transmission and drivetrain. MIL on. DTCs are stored in the engine control module. There may be slight power reduction at high RPMs. One of the vacuum actuators on intake runner bank 1 or bank 2 is defective.
• 10065647Jul 9, 2013Engine. Summary to be provided on a future date.
• 10228318Jul 8, 2013Fuel system, Engine cooling. In vehicles produced during a certain period, the AdBlue filter seal within the level sensor module may have been damaged during the assembly process. This damaged seal can allow unfiltered AdBlue to be sucked into the delivery system, subsequently damaging the pressure sensor and reducing agent pump V437.
• 10224997Jul 8, 2013Fuel system, Electrical system. In vehicles produced during a certain period, the AdBlue filter seal within the level sensor module may have been damaged during the assembly process. This damaged seal can allow unfiltered AdBlue to be sucked into the delivery system, subsequently damaging the pressure sensor and reducing agent pump V437.
• 10221970Jul 8, 2013Engine cooling, Fuel system. In vehicles produced during a certain period, the AdBlue filter seal within the level sensor module may have been damaged during the assembly process. This damaged seal can allow unfiltered AdBlue to be sucked into the delivery system, subsequently damaging the pressure sensor and reducing agent pump V437.
• 10124505Jul 8, 2013Brakes, Electrical system. Customer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged.
• 10124488Jul 8, 2013Engine. MIL on. DTC P20E9 is stored in the engine control module (ECM). In vehicles produced during a certain period, the AdBlue filter seal within the level sensor module may have been damaged during the assembly process. This damaged seal can allow unfiltered AdBlue to be sucked into the delivery system, subsequently damaging the pressure sensor and reducing agent pump V437.
• 10065646Jul 8, 2013Engine. Summary to be provided on a future date.
• 10124580Jul 3, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 94 number 13-11 dated March 6, 2013. There is considerable moisture present in the headlamp. The moisture disappears only after extended drives (greater than 10 minutes). There is no external damage to the headlamp which could introduce moisture. Humid air settles on the inside of the glass, causing moisture to appear on the inside of the headlamp lens. Because of the…
• 10124532Jul 3, 2013Equipment. This document contains the Audi delivery guidelines checklist.
• 10068710Jul 3, 2013Exterior lighting. Summary to be provided on a future date.
• 10243787Jul 1, 2013Equipment. Audi Elsa Newsletter
• 10123516Jun 28, 2013Equipment. This document contains the Audi pre-delivery checklist.
• 10228314Jun 21, 2013Fuel system. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
• 10224993Jun 21, 2013Fuel system. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.

← All problems reported for the 2014 Audi Q7