2019 BMW X5 Technical Service Bulletins

482 technical service bulletins (TSBs) are on record for the 2019 BMW X5. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10176366May 1, 2020Engine cooling, Brakes, Fuel system, Lane departure, Electrical system. COOLANT LINE QUICK DISCONNECTS LEAK IN LOW TEMPERATURES AT OR BELOW -15Ë?C (5Ë?F): The coolant reservoir in the high or low temperature cooling system is low There may be a coolant leak under the vehicle There may be a check control message (ID166) to top up coolant The low temperature cooling system have a low level warning indicator.
• 10176365May 1, 2020Engine cooling. SERVICE ACTION - ADD SILICONE BOOSTER TO LOW TEMP COOLING SYSTEM: The coolant in the low temperature cooling system may not have sufficient coolant corrosion protection.
• 10176363May 1, 2020Engine cooling. TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME.
• 10176360May 1, 2020Engine. B58C AND B58M ENGINES ENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the engine oil filter housing.
• 10175293Apr 1, 2020Electrical system. REMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2).
• 10175292Apr 1, 2020Electrical system. BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2).
• 10175291Apr 1, 2020Electrical system. CHECK CONTROL MESSAGE CROSSING TRAFFIC WARNING WHILEPARKING: The check control message (CCM) "Crossing traffic warning. It is possible to continue driving" can appear when parking. This can occur when the vehicle is parked too close to adjacent solid walls such as a single car garage or an underground parking space. The wall can be on either side of the vehicle regardless if the vehicle is pulled in forwards or…
• 10175287Apr 1, 2020Electrical system. SERVICE ACTION - REPLACE RIGHT FRONT SHORT RANGE RADAR SENSOR (SRR): The functionality of the right front SRR sensor could be reduced which would display the Driving Assistance Check Control Message.
• 10175286Apr 1, 2020Electrical system. SERVICE ACTION - REPLACE LEFT FRONT SHORT RANGE RADAR SENSOR (SRR): The functionality of the left front SRR sensor could be reduced which would display the Driving Assistance Check Control Message.
• 10175285Apr 1, 2020Electrical system. DEACTIVATION OF THE INTERIOR MOVEMENT DETECTOR/TILT ALARM SENSOR IS NOT POSSIBLE: Customer complains that the interior movement detector and the tilt alarm sensor system cannot be deactivated by pressing the lock button on the remote control / BMW display key twice. The second button press on the radio remote control / BMW display key is not detected. Customer may have to press the button 3 times to deactivate the…
• 10175284Apr 1, 2020Equipment, Electrical system. SERVICE ACTION - CHECKING THE DUAL STORAGE SYSTEM AND REPLACE IF NECESSARY: In the event of an accident the two-battery Dual Storage System (DSS) is disconnected from the electrical system via an internal relay. In some cases the relay is stuck closed and a fault is set. In these circumstances: A crash shutdown of the DSS does not occur The power distribution box is supplied with power until the DSS is fully…
• 10175282Apr 1, 2020Body and structure, Latches, locks and linkages. WHEN LOCKING VEHICLE DOORS ARE LOCKED BUT VEHICLE IS NOT SECURED: The customer complains that when locking the vehicle from the outside using the remote control: The doors lock The alarm system is not activated The side mirrors (when the function is activated) do not fold in CAUSE Due to a software error on the Body Domain Controller (BDC) it identified the remote control as being inside even though the remote…
• 10175279Apr 1, 2020Body and structure, Visibility (wipers, defrost, mirrors). WIND NOISE FROM WINDSHIELD SIDE TRIM: A wind noise from the windshield area is present while driving caused by a separation of the windshield side trim (circled) on one or both sides. Improper bonding of the side windshield trim during production.
• 10175276Apr 1, 2020Body and structure. REAR DOOR SEAL DETACHED: One or both rear door seals are detached from the rear door(s). Improper connection of the door seal to the door.
• 10175275Apr 1, 2020Equipment. FIBERS PROTRUDING FROM CENTER SPEAKER COVER: Fibers are protruding from beneath the center dashboard speaker cover. Insulation material underneath the speaker may become loose. The situation may become even more noticeable on those vehicles where the dashboard area is cleaned using a vacuum cleaner.
• 10175272Apr 1, 2020Engine. DELIVERY STOP - REPLACE HIGH-PRESSURE PUMP: Due to an assembly error the flange bolts for the high-pressure pump did not have the proper tightening torque applied.
• 10174320Apr 1, 2020Electrical system, Equipment. CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both…
• 10174319Apr 1, 2020Seat belts, Electrical system. FALSE WARNINGS THAT THE FRONT PASSENGER SEAT IS OCCUPIED WITHOUT THE SEAT BELT BUCKLED: This Service Information Bulletin (Revision 10) replaces SI B72 04 17 dated September 2019. Acoustic and visual warnings indicate that the front passenger seat is occupied and the safety belt is not fastened when the seat is actually unoccupied. If the situation is currently present sit in the seat and move the seat to a…
• 10174318Apr 1, 2020Transmission and drivetrain, Electrical system, Equipment. REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED: This Service Information Bulletin (Revision 2) replaces SI B66 31 19 dated February 2020. When reverse gear is selected or the rear view camera is activated sporadically no image is displayed on the Central Information Display (CID). If the ignition is cycled off and back on the function is restored. Software error between the head unit and the rear-view camera.
• 10174317Apr 1, 2020Latches, locks and linkages, Equipment. COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: This Service Information Bulletin (Revision 1) replaces SI B66 19 19 dated May 2019. Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery. The Display Key Digital Key and the Digital Key Card are not affected. Electrostatic…
• 10174315Apr 1, 2020Electrical system, Equipment. DIAGNOSTIC HINT: DRIVING ASSISTANCE SUPPORT REDUCED CHECK CONTROL MESSAGE DISP: Driving Assistance support reduced Check Control Message (CCM) is displayed sporadically. All or some of the system functions maybe inoperative.
• 10174032Apr 1, 2020Equipment. AUTOMATED ACTIVATION OF NAVIGATION SYSTEM DURING PDI/QC1: This Service Information Bulletin (Revision 2) replaces SI B65 22 14 dated October 2015. The INITIAL NAV enabling code no longer needs to be pre-ordered through the Parts department!
• 10174031Apr 1, 2020Equipment, Electrical system. DISPLAYS SPORADICALLY REACT VERY SLOWLY WHEN SCROLLING IN THE AUDIO MENU: Sporadically the reaction time of the display in the instrument cluster the head-up display or in the CID (Central Information Display) is very long. This can occur when browsing/scrolling through lists in the audio menu switching radio stations or albums. Software in the Head Unit High (HU-H3).
• 10174026Apr 1, 2020Air bags, Engine cooling. Headlight Malfunction Check Control Message: Intermittently a check control message may be present stating "Adaptive headlight failure" (CC message 127) or "Headlight range control failure" (CC message 100).
• 10174009Apr 1, 2020Transmission and drivetrain, Brakes, Wheels, Back-over prevention (rear camera). TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin (Revision 3) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12.
• 10174007Apr 1, 2020Fuel system, Engine cooling. COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R): This Service Information Bulletin (Revision 5) replaces SI B17 06 17 dated June 2019. Traces of coolant leaking from the expansion tank of the low temperature cooling system. Coolant in the low temperature cooling circuit may also have an acrid smell and discoloration (1). Aluminum corrosion in the charge air intercoolers or in the radiator for the low…
• 10174006Apr 1, 2020Engine cooling. COOLANT LEAKING FROM THE LOW TEMPERATURE COOLING SYSTEM (B58C ENGINE): This Service Information Bulletin (Revision 1) replaces SI B17 02 20 dated March 2020. Premature breakdown of the coolant with gassing in the low temperature cooling system.
• 10172502Feb 1, 2020Electrical system, Back-over prevention (rear camera). REARVIEW CAMERA. SPORADICALLY NO IMAGE IS DISPLAYED: This Service Information Bulletin (Revision 1) replaces SI B66 31 19 dated October 2019. When reverse gear is selected or the rear view camera is activated sporadically no image is displayed on the Central Information Display (CID). If the ignition is cycled off and back on the function is restored. Software error between the head unit and the rear-view camera.
• 10172499Feb 1, 2020Electrical system, Body and structure. SERVICE ACTION: BODY DOMAIN CONTROLLER PROGRAMMING. When the vehicle is left unlocked the interior light switch is continuously monitored. This may lead to an increased battery draw. Check control message "Energy management for engine start-up" may appear. Longer stationary periods may result in a no-start depending on the battery charge state. Software error in the BDC (Body Domain Controller).
• 10172495Feb 1, 2020Electrical system. ACCESSORIES DO NOT POWER ON: Customer is not able to power accessories using the 12 volt power socket. Design change to reduce short circuits and blown fuses.
• 10172492Feb 1, 2020Engine cooling. SERVICE ACTION: ADD SILICONE BOOSTER TO LOW TEMP COOLING SYSTEM: The coolant in the low temperature cooling system may not have sufficient coolant corrosion protection.
• 10172488Feb 1, 2020Engine cooling. DELIVERY STOP: N63R AND N63M ENGINE - CHECK HIGH TEMPERATURE COOLANT SYSTEM FOR CONTAMINATION. The engine oil to coolant heat exchanger may have an internal leak resulting in engine oil contamination of the high temperature cooling system.
• 10172487Feb 1, 2020Engine cooling. ENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: This Service Information Bulletin (Revision 1) replaces SI B11 01 20 dated February 2020. On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the…
• 10171503Jan 1, 2020Electrical system. REMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2).
• 10171502Jan 1, 2020Electrical system. BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2).
• 10171497Jan 1, 2020Electrical system. ACTIVE PARK DISTANCE CONTROL: SETTING MENU NO LONGER AVAILABLE AFTER PROGRAMMING. The activation setting for Active Park Distance Control (aPDC) is no longer available after programming. In this case the customer can no longer activate or deactivate the function. Note: The setting (activated or de-activated) which was selected prior to programming the vehicle will be retained.
• 10171494Jan 1, 2020Electrical system, Body and structure. SERVICE ACTION: BODY DOMAIN CONTROLLER PROGRAMMING. When the vehicle is left unlocked the interior light switch is continuously monitored. This may lead to an increased battery draw. Check control message "Energy management for engine start-up" may appear. Longer stationary periods may result in a no-start depending on the battery charge state. Software error in the BDC (Body Domain Controller).
• 10171486Jan 1, 2020Engine cooling. SERVICE ACTION: ADD SILICONE BOOSTER TO LOW TEMP COOLING SYSTEM: The coolant in the low temperature cooling system may not have sufficient coolant corrosion protection. AFFECTED VEHICLES Vehicles which require this Service Action to be completed will show it as "Open" when checked either in AIR the "Service Menu" of DCSnet (Dealer Communication System) or with ISPA NEXT.
• 10171483Jan 1, 2020Engine cooling. DME FAULT MEMORY ENTRY FOR THE CRANKSHAFT SENSOR: This Service Information Bulletin (Revision 1) replaces SI B12 04 19 dated February 2019. Technicians may notice this fault logged during a diagnostic session: Fault code: Control module: Fault Text: 160021 DME Crankshaft sensor: general loss of synchronism Environmental conditions are vehicle speed 0 (stationary) and engine speed less than 1500 rpm. There is no…
• 10171479Jan 1, 2020Engine cooling. MALFUNCTION INDICATOR LAMP IS ILLUMINATED WITH A CRANKSHAFT ADAPTION FAULT: When diagnosing an illuminated malfunction indicator lamp (MIL) and/or a different issue the following faults may also be stored in the Digital Motor Electronics (DME). Fault code Control module Fault code text 213A2B DME Increment wheel adaption faulty This situation is not associated with any drivability complaints and only affects…
• 10170591Dec 1, 2019Back-over prevention (rear camera), Lane departure. TOP VIEW CAMERA: IMAGE IS MISALIGNED. The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). When the vehicle is parked in a parking spot with line markings it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side passenger side or both. The arrow identifies the line which is shown as…
• 10170589Dec 1, 2019Brakes. INCORRECT CONDITION BASED SERVICE DATA FOR BRAKE FLUID SERVICE. "Brake fluid service due since 12/2001" is displayed in the instrument cluster although the vehicle is only a maximum of 1 year old. Software error in the KOMBI (Instrument Cluster).
• 10170588Dec 1, 2019Electrical system. INSTRUMENT CLUSTER REMAINS DARK AFTER STARTING THE VEHICLE: Instrument cluster remains dark after starting the vehicle. After a restart normal functionality is restored. Software error in the KOMBI (Instrument Cluster).
• 10170571Dec 1, 2019Engine. DELIVERY STOP: N63R AND N63M ENGINE - CHECK ENGINE OIL SUPPLY CIRCUIT FOR CONTAMINATION. The engine oil pan and oil lubrication circuit may be contaminated with metal debris from the engine manufacturing process.
• 10169476Nov 1, 2019Equipment, Forward collision avoidance. SERVICE ACTION: REPLACE KAFAS (CAMERA-BASED DRIVER ASSISTANCE SYSTEM) CAMERA. A malfunction of the KAFAS camera can occur due to a voltage supply fault. This triggers a Check Control Message (CCM) to be displayed sporadically during the drive cycle- "Driver Assistance support restricted.
• 10169474Nov 1, 2019Equipment. NO AUDIO IS AVAILABLE FOR APPROXIMATELY 30 SECONDS AFTER HEAD UNIT START UP: After programming vehicle no audio is available for approximately 30 seconds after head unit start-up. Fault code B7F490 "Control unit reset" is present in the RAM (Receiver Audio Module).
• 10169472Nov 1, 2019Equipment, Electrical system. ENGINE SPEED DEPENDENT NOISE DURING AUDIO PLAYBACK: Integration level updated. There is an engine speed-dependent noise heard through the speakers during audio playback. Software error in the Receiver Audio Module (RAM) control unit.
• 10169469Nov 1, 2019Equipment, Electrical system. INSTRUMENT CLUSTER AND ONBOARD COMPUTER INTERMITTENTLY INOPERATIVE: Instrument Cluster (KOMBSP18) functions are intermittently inoperative including: On-board Computer (BC) button on turn signal stalk (BC button shown at left) Radio displays Menu button Turn signal displays Arrows on multifunction steering wheel MFL thumbwheel control.
• 10169468Nov 1, 2019Equipment, Visibility (wipers, defrost, mirrors). Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full : The low washer fluid warning is illuminated even though the washer fluid reservoir is full. There are no faults stored in the system for the washer fluid level switch. A non-approved washer fluid was used that is silicone-based. Silicone-based fluids are not compatible with the contactless capacitive level sensor. Fluids that contain…
• 10169467Nov 1, 2019Equipment, Body and structure, Latches, locks and linkages. DOORS LOCKED WITH REMOTE CONTROL INSIDE THE VEHICLE. The customer states that the vehicle locks itself when the last door was closed even though the remote control/display key was inside the vehicle. Sporadic interference causes the vehicle to revert to "outside detection" of the vehicle remote control instead of "inside the vehicle detection" which is where the key was located.

← All problems reported for the 2019 BMW X5