2016 Chevrolet Volt Technical Service Bulletins

1,335 technical service bulletins (TSBs) are on record for the 2016 Chevrolet Volt. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10126113Jul 25, 2017Electrical system. This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
• 10126068Jul 25, 2017Electrical system. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
• 10126065Jul 25, 2017Equipment. This warranty administration bulletin provide policy information on required operating procedures.
• 10126111Jul 24, 2017Electrical system. This informational bulletin provides to the tech the new version of SPS that will prompt warnings when trying to reprogram modules that have been already reprogrammed.
• 10114088Jul 24, 2017Electrical system. This Preliminary Information communication provides information to the technician about the text messaging feature on some newer General Motors infotainment systems. Pair the iPhone to the system then enter the Bluetooth settings menu, select the “i” icon next to the vehicle name in the device and enable show notifications. The text messaging feature will be available on the next ignition cycle.
• 10108645Jul 19, 2017Tires. This informational bulletin provides information on the temporary tire flat spotting condition.
• 10114082Jul 18, 2017Fuel system. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
• 10108640Jul 18, 2017Equipment, Fuel system. This informational bulletin provide a service tip that when servicing the fuel tank and/or replacing the isolator pads, the padding on the new design tank is smaller than the current design and requires the protective caps be installed to the #4 cross bar.
• 10108633Jul 18, 2017Visibility (wipers, defrost, mirrors). This informational bulletin provides information on wiper arms that have a pedestrian protection system and the potential for the system to be inadvertently tripped.
• 10108624Jul 18, 2017Equipment. This informational bulletin provides information on GM offering the Android Auto feature upgrade for 2016 and 2017 model year vehicles and how to proceed with reprogramming the vehicles to include this application for use.
• 10108618Jul 18, 2017Tires. This informational bulletin provides information that the TPM sensors must always be relearned when accessory wheels are installed on the vehicle.
• 10114077Jul 17, 2017Equipment. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
• 10156961Jul 14, 2017Equipment, Engine cooling. 17197 01 - Service Update. Some vehicles may have contact between an evaporative emission pipe and air conditioning (A/C) hose. Over time, such contact may wear a hole into the pipe causing a malfunction indicator lamp (MIL) to illuminate and diagnostic trouble code (DTC) P0442 may set. Dealers will inspect the pipe for wear, install a bumper on the pipe; and if necessary, replace the purge pipe.
• 10114072Jul 13, 2017Back-over prevention (rear camera), Equipment. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the…
• 10114071Jul 12, 2017Fuel system. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
• 10114061Jul 5, 2017Forward collision avoidance. This Preliminary information communicatesa "Forward Collision System Reduced" message displayed on the DIC when theForward Automatic Braking has been set to the "Alert" setting. This is normal when theFAB has been set to "Alert".
• 10118290Jun 30, 2017Equipment. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
• 10158900Jun 28, 2017Equipment, Engine cooling. 17197 - Service Update. Some vehicles may have contact between an evaporative emission pipe and air conditioning (A/C) hose. Over time, such contact may wear a hole into the pipe causing a malfunction indicator lamp (MIL) to illuminate and diagnostic trouble code (DTC) P0442 may set. Dealers will inspect the pipe for wear, install a bumper on the pipe; and if necessary, replace the purge pipe.
• 10118285Jun 28, 2017Electrical system. This Preliminary Information communication advises the technician that the High Voltage Drive Motor Battery and Battery sections have been placed on part restriction by General Motors Technical Assistance. Dealer will need to call General Motors Technical Assistance Center for further assistance.
• 10118265Jun 15, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that the radio will not retain the previous settings and will go to the Home Icon screen when the vehicle is restarted. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
• 10118256Jun 12, 2017Electrical system. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System.
• 10118249Jun 7, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find a Diagnostic Trouble Codes P0C57, P0C58 and/or P0C62. When the technician has duplicated and is unable to find a repair after checking wiring and following normal diagnosis, please replace the Motor B Position Sensor to resolve the…
• 10118246Jun 6, 2017Equipment. This Preliminary information communicates more information to help diagnoseP1AEE and P1AEF. It Gives 3 possible reason for the codes to set and areas to look.
• 10118233Jun 2, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
• 10137631May 26, 2017Suspension. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.
• 10137645May 24, 2017Engine cooling. This technical bulletin provides a procedure for checking and testing the cooling system first before replacing the Auxiliary Coolant Pump for a noise.
• 10137665May 23, 2017Equipment. This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
• 10137600May 22, 2017Wheels. This informational bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
• 10137680May 19, 2017Brakes. This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
• 10137601May 17, 2017Engine. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
• 10137629May 16, 2017Brakes. This technical bulletin provides a procedure for replacing the brake pedal push rod retainer due to a noise heard when applying and releasing the brake pedal.
• 10137605May 15, 2017Equipment. This informational bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
• 10137653May 10, 2017Engine, Equipment. This informational bulletin explains the difference in oil filters and the possibilities of what may happen using the incorrect filter.
• 10137640May 10, 2017Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10137635May 10, 2017Equipment, Fuel system. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
• 10137602May 4, 2017Equipment. This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
• 10137603May 2, 2017Equipment. This warranty administration bulletin provide policy information on required operating procedures.
• 10114046Apr 27, 2017Brakes. This technical bulletin provides a procedure to check and repair possible damaged terminals at the EBCM or the parking brake actuators.
• 10114043Apr 27, 2017Electrical system. This informational bulletin provides information on Wireless Charging Module Diagnosis.
• 10113986Apr 26, 2017Fuel system. This technical bulletin provides a procedure to replace the fuel pump module assembly if the DTC P2635 and/or P018B are set.
• 10113978Apr 26, 2017Equipment. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
• 10114038Apr 24, 2017Equipment. This informational bulletin provides information for technicians to clear codes and for dealership personnel to advise the customers to avoid resting their foot on the brake pedal while using the accelerator pedal.
• 10113980Apr 21, 2017Equipment. ?
• 10114027Apr 19, 2017Wheels. This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
• 10113993Apr 18, 2017Equipment. this informational bulletin provides Information on Using MyBuick, MyCadillac, MyChevrolet, and MyGMC Phone Applications to Control GM Accessory Remote Start Kits.
• 10114048Apr 12, 2017Equipment. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10113977Apr 10, 2017Equipment. This informational bulletin provides information on proper use of floor mats.
• 10113979Apr 6, 2017Electrical system, Equipment. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
• 10113976Apr 6, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10113989Apr 4, 2017Wheels, Equipment. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.

← All problems reported for the 2016 Chevrolet Volt