2016 GMC Yukon XL Technical Service Bulletins

1,456 technical service bulletins (TSBs) are on record for the 2016 GMC Yukon XL. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082422Aug 2, 2016Equipment. This technical bulletin provides diagnostic tips to help correct multiple concerns regarding the usb port being inoperative or unable to play music through the usb port.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10126063Jul 12, 2016Engine. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
• 10126062Jul 11, 2016Brakes. This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns.
• 10100822Jul 11, 2016Engine. This informational bulletin provides the technician with what may happen to an engine due to lack of maintenance.
• 10100806Jul 11, 2016Engine cooling. This technical bulletin provides a procedure to replace the valve lifter oil manifold and the lifters to correct the customers concern of engine misfire, tick noise and mil on.
• 10100805Jul 11, 2016Seats. This engineering informational bulletin is requesting information from the field with the conditons of a rattle noise originating from the second row seat.
• 10094786Jun 30, 2016Equipment. This engineering informational bulletin is ending the need for information from the field of vehicles with the condition of intermittent hvac cooling issues while driving.
• 10089108Jun 30, 2016Equipment. This technical bulletin provides a procedure to reprogram the hmi module to correct a condition of gps inoperative, red line across gps indicator or the location is stuck in warren michigan.
• 10097193Jun 28, 2016Transmission and drivetrain. This technical bulletin provides a procedure to replace the stator shaft support to correct customer concern on a delayed engagement when the transmission is shifted from park to reverse or park to drive after the vehicle has been sitting with the engine off due to the torque converter draining the transmission fluid back into the transmission pan.
• 10074343Jun 28, 2016Transmission and drivetrain. This technical bulletin provides a procedure to replace the stator shaft support to correct customer concern on a delayed engagement when the transmission is shifted from park to reverse or park to drive after the vehicle has been sitting with the engine off due to the torque converter draining the transmission fluid back into the transmission pan.
• 10089228Jun 17, 2016Equipment. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10081961Jun 14, 2016Visibility (wipers, defrost, mirrors). This technical bulletin provides information on the proper reconnection of the rear window defroster tab if a customer comments one loose or broken.
• 10081043Jun 14, 2016Fuel system, Engine. This preliminary information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced.
• 10081022Jun 14, 2016Electrical system. This preliminary information communication advises the technician that ,when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10094784Jun 13, 2016Transmission and drivetrain. This engineering informational bulletin is ending the need for information from the field of vehicles with the condition of bang or loud noise with no forward (drive) or reverse ranges.
• 10089247Jun 10, 2016Equipment. This informational bulletin provides information on the proper use of floor mats.
• 10097195Jun 8, 2016Equipment. This technical bulletin provides a procedure to inspect the air box and air filter seal and replace if necessary to correct a customer concern that the malfunction indicator light (mil) is illuminated due to excessive sand and/or debris entering the air filter box and bypassing the seal of the air filter causing damage to the ho2 sensor and the catalytic converter to become blocked with sand and debris particles.
• 10080684Jun 8, 2016Engine. This preliminary information communication provides information to the technician the steps needed to diagnose and repair vehicles with a rough idle and/or vibration at idle in drive. This condition will not be present in park, or neutral. This concern may be caused by ground out within the one or both engine mounts. Technician will use ch-51450-a (pico oscilloscope) to measure the vibration disturbance.
• 10078432Jun 8, 2016Equipment. This technical bulletin provides a procedure to inspect the air box and air filter seal and replace if necessary to correct a customer concern that the malfunction indicator light (mil) is illuminated due to excessive sand and/or debris entering the air filter box and bypassing the seal of the air filter causing damage to the ho2 sensor and the catalytic converter to become blocked with sand and debris particles.
• 10081963Jun 3, 2016Transmission and drivetrain. This technical bulletin provides a procedure to flush and drain the transmission fluid to correct a customer concern of transmission shake and/or shudder during light throttle acceleration between 48 and 104 km/h (30 and 65 mph) at a steady state.
• 10080661Jun 3, 2016Engine, Transmission and drivetrain. This preliminary information communication provides information to the technician on the step to diagnose and repair the vehicles that may have a shake or shudder during light throttle acceleration, between 30 and 65 mph steady state driving. Also shudder feeling that may be described as driving over rumble strips or rough pavement. Technician will drive the vehicle and monitor the torque converter clutch slip.
• 10114106May 31, 2016Steering. This technical bulletin provides a procedure to drain, flush and refill the transmission fluid to correct a customer concern of shake and/or shudder during light throttle acceleration between 48 and 104 KM/H (30 and 65 MPH) at a steady state.
• 10114105May 31, 2016Engine, Electrical system. This informational bulletin provides information on identifying non-GM (aftermarket) engine calibrations for gasoline engines using Tech 2 or GDS 2.
• 10114101May 25, 2016Wheels. This informational bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening or re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed.
• 10118548May 24, 2016Visibility (wipers, defrost, mirrors), Equipment. This informational bulletin provides repair information on reconnection of rear window (defroster) contact or tab.
• 10078921May 24, 2016Equipment. This preliminary information communication provides the technician with a diagnostic aid for identifying infotainment components on the vehicles to ensure that the correct component is ordered or replaced and the correct labor code is used for warranty submission.
• 10118547May 20, 2016Tires. This informational bulletin provides information on the temporary tire flat spotting condition.
• 10114107May 20, 2016Electrical system. This informational bulletin provides information on service programming system (SPS) errors.
• 10078887May 18, 2016Steering, Equipment. This preliminary information communication provides information to the technician on how to diagnose and repair vehicles with one of the two concerns. Vehicle may have an intermittent "service power steering, drive with care" on the driver information center and a diagnostic trouble code c0545 symptom 00 set in the power steering control module.
• 10114111May 17, 2016Electrical system. This engineering information bulletin is requesting information from the dealers on a customer concern that one of the USB ports is not charging, allowing data to transfer.
• 10118546May 16, 2016Equipment. This informational bulletin provides information on a new U.S. dealer special tool loan program.
• 10118545May 16, 2016Electrical system, Equipment. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
• 10078881May 16, 2016Equipment, Electrical system. This preliminary information communication advises the technician that diagnostic trouble code b127e in the human machine interface with regular production option code u42 or uwg will be current when playing a dvd or blu-ray on the integrated center stack display. When the disc is ejected the diagnostic trouble code will be history.
• 10134546May 13, 2016Equipment, Back-over prevention (rear camera). This technical bulletin provides a procedure to reprogram the radio to correct a customer concern of radio Inoperative, blue Screen, AM clipping noise, HD on/off status not retained in stations, time lag on transitions, no audio with internal amp, and park assist symbol position wrong in rear view camera.
• 10134545May 13, 2016Electrical system. This informational bulletin provides warranty information on accessory power outlet and trailer lighting fuse replacement.
• 10134541May 10, 2016Electrical system, Visibility (wipers, defrost, mirrors). This technical bulletin provides a procedure to reprogram the BCM to correct a customer concern on a dead battery or no start and DTC B1527 set caused by to the child window lock, when active, causing the BCM to continuously wake up and run the battery down.
• 10134536May 6, 2016Equipment. This warranty administration bulletin provides information on GM?s policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
• 10081365May 6, 2016Electrical system. This informational bulletin provides information on the identification of vehicles that are shipped with the transport mode on and how to turn it off.
• 10078860May 2, 2016Visibility (wipers, defrost, mirrors). This preliminary information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
• 10078583May 1, 2016Equipment. This informational bulletin provides information to advise the customers that have enrolled their vehicle into the onstar advanced diagnostics & real time diagnostic alerts they may receive alerts from their vehicle when it is being serviced.
• 10078571May 1, 2016Equipment. This informational bulletin provide information on the product quality center (pqc) assembly replacement process.
• 10078569May 1, 2016Fuel system, Other or unknown. This informational bulletin provides information on vehicles designed to operate on gaseous fuels.
• 10078568May 1, 2016Transmission and drivetrain, Equipment. This informational bulletin provides information on how to inspect the upper valve body to determine the correct rpo usage to correct a concern that after installation of a replacement upper valve body, the transmission may have no reverse and no 2nd gear due to the installation of the incorrect upper valve body.
• 10078567May 1, 2016Engine. This technical bulletin provides a procedure to replace the valve lifter oil manifold and affected bank of afm lifters to correct a customer concern on a malfunction indicator lamp (mil) on and/or an engine misfire/tick noise with dtc p0300 set due to an active fuel management (afm) lifter that is mechanically collapsed and/or stuck all of the time.
• 10078575Apr 29, 2016Equipment. This technical bulletin provides a procedure to install a new foam patch over the microphone to correct a customer concern that when using the bluetooth® phone system in their vehicle, the person on the receiving end of a mobile telephone call states the audio sounds muffled, distorted or has static due to the foam patch on the back of the headliner at the microphone mounting area coming loose.
• 10083899Apr 28, 2016Fuel system. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of a rattle or ticking noise that is louder inside the vehicle than outside. Instructions are provided to inspect the fuel feed line between the high pressure fuel pump and chassis fuel line.
• 10078755Apr 28, 2016Fuel system, Body and structure. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of a rattle or ticking noise that is louder inside the vehicle than outside. Instructions are provided to inspect the fuel feed line between the high pressure fuel pump and chassis fuel line.

← All problems reported for the 2016 GMC Yukon XL