2016 GMC Yukon XL Technical Service Bulletins

1,456 technical service bulletins (TSBs) are on record for the 2016 GMC Yukon XL. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10112820Mar 23, 2016Engine. This preliminat informational bulletin provides information on the proactive alert advanced diagnostics. Proactive Alert monitors the Engine Cranking system and the Fuel Delivery system and if either one of these monitored systems triggers certain performance issues, specific Customer and Dealer Communication are sent.
• 10112819Mar 23, 2016Engine. This informational bulletin provides information on Identifying Non-GM (Aftermarket) Engine Calibrations for Gasoline Engines Using Tech 2® or GDS 2 (U.S. and Canada)
• 10113957Mar 22, 2016Electrical system. This Preliminary Information communication advises the technician that some vehicles intermittently the favorites saved from a USB drive or SD card are grayed out and not selectable. Please communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
• 10113956Mar 22, 2016Equipment. This Preliminary Information communication advises the technician that some vehicles may have a radio that turns on unwanted at start up. If the radio was shut off before the vehicle was shut off and at start up the radio turns on, please communicate to the customer that we apologize for this inconvenience, and that General Motors is working on a solution for this concern.
• 10113955Mar 22, 2016Equipment. This Preliminary Information communication advises the technician that some vehicles may have a radio display that is covered when the radio station favorites list is maximized. This is a normal operating characteristic and no repair attempt should be made. The hidden screen functions will operate again after the user minimizes the favorites list by dragging it to the bottom of the display.
• 10113952Mar 21, 2016Electrical system, Equipment. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position, Any of the following Diagnostic Trouble Codes may be set: B1370, B1325, P0650, P263A, P263B, P0513, and/or P0262B.
• 10113950Mar 21, 2016Engine, Brakes, Electrical system. This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages ? Brake Pedal Override Feature ?, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set.
• 10113949Mar 21, 2016Suspension. This Preliminary Information communication provides information to the technician with the steps to diagnosis and repair vehicles with various handling, vehicle dynamics concerns, noises from the suspension or underbody, or issues related to damaged suspension components. Before any in-depth diagnostics are performed, be aware that various issues could occur if the vehicle has been modified and inform the customer…
• 10113941Mar 18, 2016Seats, Seat belts, Electrical system. This Preliminary Information communication provides information to the technician about the vehicles equipped with power folding 3rd row seat and how to diagnosis and repair seats that do not fold down completely or the 60% side does not fold even with the 40% side. Technician will inspect under the 3rd row seat for any objects that will prevent the seat from folding as designed.
• 10113934Mar 16, 2016Equipment, Electrical system. This Preliminary Information communication provides information to the technician to help diagnose vehicles that may have a radio inoperative. This concern will last through multiple ignition cycles and is not intermittent. If Service Information diagnostics do not point to the Media Disc Player as being at fault, please continue with normal diagnostics. If SI diagnostics do point to the Media Disc Player being at…
• 10113933Mar 16, 2016Equipment, Engine. This Preliminary Information communication advises the technician that generation 5 engines with Regular Production Option Code L83, L86, or LV3 may have an oil consumption concern were one quart in 2000 miles is being used. Dealer will confirm oil level was properly checked per Owner?s Manual, and check the bolt torque on the Valve Lifter Oil Manifold Assembly, before you contacting General Motors Product Quality…
• 10112795Mar 15, 2016Equipment. This informational bulletin provides information on what is needed to be prepared for TAC, caller preparedness and checklists and contacting U.S. technical Assistance and the use of strategy based diagnostics
• 10112794Mar 15, 2016Equipment. his engineering informational bulletin is requesting information from the field on vehicles that have the condition of intermittent HVAC cooling issues during driving
• 10112791Mar 14, 2016Equipment. This warranty administration bulletin provides information on Courtesy Transportation and Roadside Assistance Programs
• 10112789Mar 14, 2016Visibility (wipers, defrost, mirrors). This technical bulletin provides a procedure to relearn the power folding mirriors and road test to correct a conditon of power fold away mirriors glass shakes or flutters at normal driving speeds
• 10113924Mar 10, 2016Engine, Electrical system. This Preliminary Information communication provides information to the technician the steps to diagnose and repair the concern of the display is showing 32° F (0° C) after a battery or reprogramming a module. The outside temperature will begin to update if driven above 20 mph for at least 5 minutes. If the vehicle speed drops below 20 mph, the timer will reset and the display will stop updating.
• 10112785Mar 10, 2016Equipment, Electrical system. This informational bulletin provides information on Original Equipment Batteries Part Number and ACDelco Replacement Battery Approved Warranty Part Numbers
• 10112783Mar 9, 2016Equipment. This engineering informational bulletin is requesting information from th field on vehicles that have the condition of a vehicle crank and no start with DTC P0011 and or P00C6 set
• 10113917Mar 8, 2016Vehicle speed control, Transmission and drivetrain. This Preliminary Information communication provides information to the technician a vehicle may have a shake or shudder during light throttle acceleration, between 30 and 65 mph steady driving. Technician will drive the vehicle while monitoring Torque Converter Clutch slip speed. If the Torque Converter Clutch slip speed is in the range of 10 RPM or less the condition is possibly related to engine performance.
• 10112779Mar 7, 2016Electrical system. This informational bulletin provides information on vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak and that this is considered a normal conditon and no repairs are necessary
• 10113914Mar 4, 2016Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the coil grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10113913Mar 4, 2016Equipment, Engine. This Preliminary Information communication provides information to the technician how to diagnose and repair a vehicle with an engine that runs with an intermittent crank no start with a Diagnostic Trouble Code P0011 or P00C6 current or history. The Camshaft Position Actuator Solenoid Valve may be sticking or binding causing the valve timing to be retarded. Dealer will need to cycle the Camshaft Position Actuator…
• 10112773Mar 3, 2016Electrical system. This informational bulletin provides information on If the radar does not see any vehicles, structures, or objects for 15-25 minutes of driving, the system may think its blocked and display the ?Side Object Detection System Disabled? message.
• 10112772Mar 3, 2016Electrical system. This technical bulletin provides a procedure on how to take the vehicles out of transport mode for vehicles with the condition of Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing
• 10113904Mar 2, 2016Engine. This Preliminary Information communication advises the technician that generation 5 engines with Regular Production Option Code L83, L86, or LV3 may have an oil consumption concern were one quart in 2000 miles is being used. Technician will confirm oil level was properly checked per Owner?s Manual, and check the bolt torque on the Valve Lifter Oil Manifold Assembly, before you contacting General Motors Product…
• 10113894Mar 2, 2016Equipment. This Preliminary Information communication provides the technician with information on vehicles with navigation radio Regular Production Option Code IO6 or UY4 that defaults to West Virginia instead of Virginia on a manual entry. General Motors engineering is currently working on a solution for this concern.
• 10113893Mar 2, 2016Equipment. This Preliminary Information communication advises the technician when the radio display is continuously flashing on and off every five seconds the Human Machine Interface will need to be replaced.
• 10112771Mar 2, 2016Equipment. This informational bulletin provides information on New Vehicle Pre-Delivery Inspection (PDI) - Delivering Quality Vehicles and Generating Higher CSi Scores
• 10112770Mar 2, 2016Electrical system. This informational bulletin provides information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability
• 10112769Mar 2, 2016Equipment. This informational bulletin provides information on Battery Testing and Warranty Replacement Requirements (North America ONLY)
• 10112768Mar 2, 2016Equipment. This informational bulletin provides information on how to properly maintain vehicles in the dealer inventory
• 10112764Mar 1, 2016Equipment. This warranty informational bulletin provides a list of all the required operating procedures and explains them out to what is acceptable and not.
• 10095974Feb 26, 2016Engine cooling. This preliminary information communication provides information to the technician about vehicle that may have black smoke on a cold start. A dual-pulse injection strategy is utilized during engine cold start to reduce the time required to bring the catalytic converter up to operating temperature. This split injection strategy lasts for about 60 seconds on cold start. This process may cause the customer to see…
• 10116920Feb 25, 2016Tires, Electrical system. This informational bulletin provides information on how to trace and complete a wire to wire repair on vehicle that have the concern of Service Tire Monitor System, Tire Pressures Display Dashes, RKE Short Range, No Fob Detected Message
• 10116914Feb 23, 2016Tires, Wheels. This informational bulletin provides information on the proper mounting paste to apply to tires when mounting and balancing them to prevent conditions like Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel)
• 10096241Feb 23, 2016Equipment. This preliminary information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have rattle or buzz noise from the rear of the vehicle. Technician will need to remove right rear inner fender well and inspect the rear auxiliary heater / evaporator lines for contacting each other. If the lines are found to be contacting each other, loosen the retaining…
• 10096046Feb 23, 2016Transmission and drivetrain. This preliminary information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10116912Feb 22, 2016Equipment. This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
• 10096141Feb 18, 2016Equipment. This preliminary information communication provides information to the technician about vehicles that may have an outside air temperature inoperative. To perform an instant update of the ambient temperature sensor, press and hold the recirc button and air conditioning button on the heater-vent-air conditioning control head simultaneously. It is also possible to perform this by using a scan tool in special function…
• 10096207Feb 17, 2016Visibility (wipers, defrost, mirrors), Equipment. This preliminary information communication provides information to the technician about vehicle that may have wind whistle noise heard from the right or left rear quarter glass area when driving at highway speeds or with a cross wind. Technician will inspect the quarter glass for excessive urethane. If excessive urethane is found use a sharp knife and cut off the excessive urethane. Also the technician will install…
• 10096211Feb 15, 2016Brakes. This preliminary information communication provides information to the technician on the step needed to diagnose and repair vehicles that may have uneven brake pad wear. Technician will need to inspect and measure the brake pads thickness. Also determine the customer’s driving style. The disc brake pads should only be replaced if the friction surface is worn to within 2.0 mm (0.079 in) of the…
• 10095945Feb 15, 2016Fuel system, Engine. This preliminary information communication provides information to the technician how to diagnose and repair a vehicle with an engine that runs with an intermittent crank no start with a diagnostic trouble code p0011 or p00c6 current or history. The camshaft position actuator solenoid valve may be sticking or binding causing the valve timing to be retarded. Dealer will need to cycle the camshaft position actuator…
• 10095583Feb 15, 2016Equipment. This preliminary information communication provides information to the technician with the steps need to diagnose and repair vehicle that may have a concern with navigation icon not showing the correct location then jumping to the correct location. The position indicator may show the vehicle turning in the opposite direction or may show the vehicle traveling off the road. Technician will inspect the human machine…
• 10116892Feb 12, 2016Engine cooling. This engineering informational bulletin is requesting information from the field on vehicles that have a concern on Bang or Loud Noise with No Forward (Drive) or Reverse Ranges
• 10116891Feb 12, 2016Equipment. This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
• 10116890Feb 12, 2016Exterior lighting. This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
• 10096225Feb 12, 2016Electrical system, Equipment. This preliminary information communication provides information to the technician about vehicles that may have a "service front camera" message on the driver information center intermittently. When the technician uses the scan tool to check for diagnostic trouble codes a history u023a and/or u026a may be set in the instrument panel cluster and/or body control module. It is important that the technician does not…
• 10096221Feb 12, 2016Engine cooling, Equipment. This preliminary information communication provides information to the technician on the steps needed to diagnose and repair vehicles that may have a rattle noise from the dash. Technician will need to inspect for the rear heater pipes contacting the passenger side exhaust manifold. If the rear heater pipe is found to be contacting the exhaust manifold, reposition the heater pipe so it no longer makes contact.
• 10096033Feb 12, 2016Engine. This preliminary information communication advises the technician before replacing the crankshaft to review the following. Dealer should complete the service information diagnostics and the cost comparison worksheet for assembly repair vs replacement. Technician will use the latest version of 09-06-04-026g to verify the ecm calibration is not an aftermarket calibration. If the customer prefers to keep the original…
• 10116888Feb 11, 2016Equipment. This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)

← All problems reported for the 2016 GMC Yukon XL