2008 Jeep Commander Engine cooling Problems
- Complaints
- 14about this part
- Share
- 4%of 326 total for the year
- Median mileage
- 57,000miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 14 complaints about the engine cooling of the 2008 Jeep Commander, 4% of the 326 complaints for this model year. Where a mileage was given, the median is 57,000 miles.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“Engine stalls: engine stalls randomly, at a light, around a corner, and even on freeway at 70 MPH. Engine will not restart after a stall until the key has been removed from the ignition. I have had at least 15-20 stalls since I have owned the vehicle. Transmission jerks: this started in the last few months. Transmission disengages while driving down the road then suddenly reengages, jerking the car forward. Sometimes the car will continue ok, sometimes the engine will die. …”
NHTSA complaint #10457409, filed 2012-05, 36,203 miles“My adult children's 2008 Jeep Commander engine has quit running, while they are driving, eight times in the past 4 months. (7/26/2010 thru 11/26/2010). The last time the engine quit running my son was driving the car, he was able to restart the engine with the car in drive (turning the key multiple times). They have had many issues with warning lights flickering and/or staying on. They have taken the Jeep to waldorf chrysler Jeep dealer 8 times due to engine failure. …”
NHTSA complaint #10368769, filed 2010-11, 62,001 miles“My 2008 Jeep Commander overland edition has been stalling out and jumping. It started with dying when I would come to a stop at a stop sign or red light. I would put it in park and it would crank back up. It then graduated to jumping while I was driving down the interstate at 60+ MPH. It would jump as if it came out of gear, but then kick back in and continue as if nothing was wrong. It has now started jumping like that and dying while driving at 60+ MPH. It jumps, then dies and we lose power steering. It is very scary and very dangerous. …”
NHTSA complaint #10499543, filed 2013-02, 65,000 miles“2008 Jeep Commander. Consumer writes in regards to several issues with vehicle the check engine light and traction control light illuminated and the vehicle stalled. The dealer could not diagnose the problem as there were no fault codes. Two days later, the dealer replaced the crank sensor. Four months later, the check engine and traction control light illuminated and the vehicle stalled. The dealer was unable to duplicate the problem. One week later, the same lights illuminated and the vehicle stalled. On december 2, 2009 the vehicle stalled again. …”
NHTSA complaint #10340062, filed 2010-06, 11,664 miles“The contact owns a 2008 Jeep Commander. The contact was driving 60 MPH when the vehicle stalled without warning. The contact was able to restart the vehicle but it was not taken to the dealer for inspection or repairs. The manufacturer was notified of the failure who advised that there were no recalls for the failure and offered no further assistance. The failure mileage was 83,500.”
NHTSA complaint #10444418, filed 2012-01, 83,500 milesRelated service bulletins
- 10191460Feb 26, 2016Valve Body. These may cause over drive cycling.
- 10121927Jan 26, 2016NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also…
- 10229181Feb 12, 2015Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must…
- 10223602Feb 12, 2015Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must…
- 10223599Feb 11, 2015Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid…
- 10140065Feb 6, 2013Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure…
- 10138987Feb 6, 2013Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure…
- 10032766Aug 1, 2009Chrysler/jeep/dodge: california emissions warranty addendum. The warranty book on certain vehicles may contain errors or may be missing information regarding the coponents…
- 10023422Oct 12, 2007Mil illumination due to diagnostic trouble code (dtc) p0524 - engine oil pressure too low.
- 10023403Oct 2, 20073.0l diesel oil filter cap service.
Engine cooling: other model years
Other parts of the 2008 Jeep Commander
201 complaintsEngine
59 complaintsTransmission and drivetrain
30 complaintsAir bags
22 complaintsVisibility (wipers, defrost, mirrors)
19 complaintsOther or unknown
17 complaintsVehicle speed control
15 complaintsBrakes
12 complaintsElectronic stability control
9 complaintsFuel system
9 complaintsSteering
9 complaintsBody and structure
9 complaints
← All problems reported for the 2008 Jeep Commander
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 27, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology