2016 Mazda CX-9 Technical Service Bulletins

613 technical service bulletins (TSBs) are on record for the 2016 Mazda CX-9. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10076910Feb 4, 2016Lane departure, Electrical system. Blind spot monitoring (bsm) system change. The 2016 mx-5, 2016 cx-3 and new 2016 cx-9 bsm system vehjicle detection has changed. Although the overall function is the same as previous vejhicles, vehicle detection is different.
• 10213421Jan 25, 2016Exterior lighting. Condensation/Fog in front and rear combination lights
• 10213405Jan 25, 2016Transmission and drivetrain. ATFFZ required for SKYACTIV drive 6speed automatic transaxle
• 10100889Jan 25, 2016Transmission and drivetrain. The new skyactiv-drive fw6a-el at uses “automatic transmission fluid (atf) type: fz”. Only use “atf-fz” to fill or top off the fluid level. Atf-fz is specially designed for use in the skyactiv-drive series at. It is a low viscosity formula with less friction for better fuel economy. Note: atf-fz is colored blue for easy identification. To check the fluid level, remove the bolt, then remove the dipstick. The…
• 10100888Jan 25, 2016Exterior lighting. Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/tail-light) combination lights. The recent new models have been fitted with a clear lens which can cause the symp-tom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference…
• 10213325Jan 14, 2016Equipment. Special service tool shipment Janaurary 2016
• 10105849Jan 14, 2016Equipment. In support of improved electrical diagnosis on skyactiv vehicles, mazda will ship a terminal test kit to all dealers. The test kit is designed pecifically for skyactiv module terminals.• the sst will be shipped by mazda’s tool vendor bosch starting january 15, 2016.• procedures for usage are found in the skyactiv wiring terminal test kit wbt, course #1649.• the following sst is the latest addition to the mazda…
• 10186921Jan 1, 2016Equipment. SEE TECH TIPS
• 10186920Jan 1, 2016Electrical system. Do not update the Mazda connect system with an earlier version of software. The latest Mazda connect software (version 58) Do not attempt to update with the software version available on MS3 (version 55). If you update to an earlier version of software you will beed to wait until the end of Sept when software version 59 should be available for download.
• 10186917Jan 1, 2016Electrical system. Mazda connect software version 59.00.441 available - Important Update. Used the Labor Op Code in the TSB to update these vehicles with a customer concern until an updated TSB is published.
• 10186916Jan 1, 2016Body and structure. Exterior side garnish damage due to improper vehicle lift - Adjust the height of the vehicle lift extension pad to prevent lieft arm contact with the exterior side garnish. If not adjusted properly, the exterior side garnish and/or a fender may be damaged by the vehicle.
• 10186914Jan 1, 2016Seats. Third row seat head restraint is not upright - Some customers may complain about one or both third row seat head restraint(s) cannot be moved to the upright position, This may caused by improper fold position of the head restraint(s) when the seat back is folded down.
• 10105481Aug 7, 2015Equipment. Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to dag exchange central (mxconnect>parts and accessories>parts>programs>exchange central) for component availability, source of technical support and prior authorization requirement.

← All problems reported for the 2016 Mazda CX-9