2014 Mazda MAZDA6 Technical Service Bulletins

757 technical service bulletins (TSBs) are on record for the 2014 Mazda MAZDA6. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10098006Jan 14, 2014Equipment. Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the rapgard is removed at pdi. This may be caused by moisture which has been trapped and condensed between the paint and the rapgard.
• 10061474Jan 14, 2014Equipment. Summary to be provided on a future date.
• 10060458Jan 14, 2014Equipment. Summary to be provided on a future date.
• 10060456Jan 14, 2014Equipment. Summary to be provided on a future date.
• 10098008Jan 10, 2014Equipment. Some customers may experience one of the following two symptoms: 1. Symptom (mazda6 only) a. Warning message “I-eloop inspection required” is displayed in the instrument cluster information display while driving. B. The master warning light will be illuminated. C. Dtc p1794:00 (capacitor (I-eloop) system: capacitor (I-eloop) malfunction) will be stored in pcm memory.2. Symptom (mazda3 and mazda6) a.
• 10061492Jan 10, 2014Electrical system. Summary to be provided on a future date.
• 10098011Jan 8, 2014Equipment. A rattle noise may be heard from the rear part of the vehicle when driving on rough roads. If the driver puts his/ her foot on the brake pedal, the noise disappears. The rear brake pad(s) may be moving inside the caliper(s), causing a rattling noise.
• 10061518Jan 8, 2014Brakes. Summary to be provided on a future date.
• 10097971Dec 12, 2013Engine. Some vehicles may exhibit the atx fail-safe function working with the following symptoms:•the vehicle speed does not increase with engine speed•the atx does not shift up or down as expectedthe condition may not always be able to be reproduced and dtcs may not be stored when the vehicle is brought in. Foreign material (iron particles in the atf) may enter the atx valve body and cause a temporary malfunction of the…
• 10059730Dec 12, 2013Engine. Summary to be provided on a future date.
• 10061473Dec 6, 2013Equipment. Summary to be provided on a future date.
• 10110986Nov 27, 2013Equipment. Some customers may experience a MRCC malfunction when driving long distances with MRCC set. Instrument cluster information display shows "FOW INSPECTION REQUIRED" and DTC C1A67:78 (Radar sensor axis is deviated) is stored. This is caused by MRCC no obstacle detection during a long drive.
• 10059459Nov 27, 2013Electrical system. Summary to be provided on a future date.
• 10110990Nov 25, 2013Suspension. Beginning with the newer models (CX-5 and Mazda6), grip type front and rear stabilizer bushings (A) have been incorporated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage (CX-5 front bushings shown below).
• 10110988Nov 25, 2013Equipment. On some vehicles, the customer may complain about any one of the following concerns: *Screen locks up to a "black screen". *Screen freezes while driving. *Screen gets stuck at TomTom logo (splash screen) during startup. *Screen temporarily gets stuck at TomTom logo (splash screen) for 2 minutes during startup. Afterwards, the navigation will not start until the ignition is cycled. *No Map Found error and SD card…
• 10060541Nov 25, 2013Equipment. Summary to be provided on a future date.
• 10059476Nov 25, 2013Equipment. Summary to be provided on a future date.
• 10110992Nov 19, 2013Electrical system. Some customers may experience a warning message "i-ELOOP Inspection Required" in the instrument cluster information display while driving. The master warning light will also be illuminated. DTC P1794:00 (Capacitor (i-ELOOP) system: Capacitor (i-ELOOP) malfunction) is stored in PCM memory.
• 10110991Nov 19, 2013Air bags, Electrical system. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
• 10059457Nov 19, 2013Electrical system. Summary to be provided on a future date.
• 10054788Nov 19, 2013Air bags. Mazda: information provided regarding the indicator light illumination of the passenger airbag deactivation (pad).
• 10110999Nov 11, 2013Suspension. Some vehicles may exhibit a knocking / squeaking noise from the front strut bearing (A) due to front strut bearing damage when driving on rough roads and/or when turning the steering wheel while the vehicle is stopped. The noise may be due to the upper housing of the front strut bearing being damaged when applying excessive force to the bearing during customer use. To eliminate the noise, the material and…
• 10110996Nov 11, 2013Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10110995Nov 11, 2013Wheels. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.Use extra care when cleaning wheels.
• 10111002Nov 5, 2013Body and structure, Equipment. Some customers may have a concern with the top edge of the rear door weatherstrip (A) detached from fas-tener (B).
• 10060525Nov 5, 2013Body and structure. Summary to be provided on a future date.
• 10097805Oct 28, 2013Equipment. A musty/mildew type odor may come from the vents when the air conditioning (a/c) system is operating. It is most noticeable when the a/c is first turned on. This odor is the result of mold growth in the a/c evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “mazda air cooling coil coating” is available…
• 10097807Oct 24, 2013Equipment. In support of the new 2014 mazda6 and the 2014 mazda3, mazda will ship to all dealers one (1) new special service tool (sst). The sst will be shipped automatically by mazda’s tool vendor bosch automotive service solutions during the month of october 2013.
• 10059417Oct 24, 2013Equipment. Summary to be provided on a future date.
• 10097813Oct 7, 2013Engine. Some vehicles may exhibit an engine no start in ambient temperatures below -4 degree fahrenheit (-20 degree celsius) after driving for 10 - 20 minutes and then parking the car for about one hour. This may be caused by the contact point of the main relay freezing due to moisture inside the main relay.
• 10059450Oct 7, 2013Engine. Summary to be provided on a future date.
• 10097744Sep 25, 2013Equipment. Some vehicles may experience mil illumination with dtc p2610 (instrument cluster internal engine off timer performance problem) stored in memory after engine start and room fuse 15a (a) removed. Note:the odometer will display “f0-002” during transport mode (room fuse 15a removed). Transport mode is canceled when room fuse 15a is installed or the vehicle odometer is more than 12.4mi (20km).
• 10097743Sep 25, 2013Electrical system. This service information provides basic q85/t110 battery handling procedures. Complete service information can be found in ms3 online or workshop manual (section 01-17).note:the gr8 battery management system q85/t110 software is currently under development. Use the gr8 battery management system, manual mode battery charging procedure in this bulletin to charge the q85/t110 battery at this time. This bulletin will…
• 10059440Sep 25, 2013Electrical system. Summary to be provided on a future date.
• 10059420Sep 25, 2013Electrical system. Summary to be provided on a future date.
• 10061470Sep 23, 2013Equipment. Summary to be provided on a future date.
• 10097722Aug 22, 2013Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10097704Aug 22, 2013Equipment. In support of the new 2014 mazda6 and the 2014 mazda3, mazda will ship to all dealers two (2) new special service tool (sst). The sst will be shipped automatically by mazda’s tool vendor, bosch during the month of august 2013.the following sst is the latest addition to the mazda required tool (mrt) list.
• 10059416Aug 22, 2013Equipment. Summary to be provided on a future date.
• 10097723Aug 13, 2013Latches, locks and linkages. When the ambient temperature drops below 32 degrees fahrenheit (0 degrees celsius), especially after rain or car wash, some customers may experience a rear door(s) that will not open. This may be caused by water entering the inside of the rear door latch and lock actuator (a) and then freezing at low temperatures.
• 10060510Aug 13, 2013Body and structure. Summary to be provided on a future date.
• 10097725Aug 1, 2013Equipment. This service bulletin illustrates the conditions when a tpms warning light may illuminate, why it illuminated and how to properly initialize the system.the tire pressure monitoring system (tpms) monitors the tire pressure of all four tires indirectly using the data sent from the abs wheel speed sensors.
• 10059465Aug 1, 2013Electrical system. Summary to be provided on a future date.
• 10097399Jul 19, 2013Seats. Some vehicles may exhibit excessive noise when operating either front power seat forward or backward. The noise may be caused by cable vibration, which transmits power from the motor to the gears. The cable vibrates inside the case due to inadequate fabric wrapped around the cable. The fabric thickness has been increased to eliminate the noise.
• 10060504Jul 19, 2013Seats. Summary to be provided on a future date.
• 10097388Jun 28, 2013Equipment. This service information is being issued to advise dealers about the following service cautions for the 2014 mazda6. Ensure that all appropriate dealer personnel have been advised of this service information: • automatic transaxle oil • q85 battery • I-eloop • engine oil • tire pressure monitoring system (tpms) • navigation system • manual transaxle oil • kickdown switch (atx) • maintenance monitor • spark plug •…
• 10052886Jun 28, 2013Equipment. Mazda: information being provided regarding service cautions on automatic transaxle oil, q85 battery, I-eloop, kickdown switch (atx), front bumper removal, spark plug, navigation system, tire pressure monitoring system (tpms), engine oil, and manual transaxle oil. Models 2014 mazda6.
• 10097389Jun 19, 2013Electrical system. This service information provides basic q85/t110 battery handling procedures. Complete service information can be found in ms3 online or workshop manual (section 01-17). Note: the gr8 battery management system q85/t110 software is urrently under development. Use the gr8 battery management system, manual mode battery charging procedure in this bulletin to charge the q85/t110 battery at this time. This bulletin will…
• 10052813Jun 19, 2013Electrical system. Mazda: information provided regarding the handling procedures of the heloop battery and software under development. Model 2014 mazda6.
• 10097391Jun 14, 2013Equipment. Some vehicles may experience a mazda radar cruise control (mrcc) warning light on with dtc c1a67:92 (radar sensor sensitivity lowered). Fow, mrcc radar blocked message will be displayed in the instrument cluster multi-information display.

← All problems reported for the 2014 Mazda MAZDA6