2017 Mazda MAZDA6 Technical Service Bulletins

516 technical service bulletins (TSBs) are on record for the 2017 Mazda MAZDA6. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10111043Jul 26, 2017Equipment. Some customers may complain about the following MAZDA CONNECT Temperature Warning message: Display is too Hot. Screen performance may be decreased until it cools. The warning message displays when the MAZDA CONNECT screen temperature is above 176 degrees Fahrenheit (80 degrees Celsius).
• 10120378Jul 24, 2017Equipment. Some vehicles may experience a rough idle with the check engine light on and DTC P0015 / P0524 stored in memory. P0015:00 - Exhaust CMP timing over-retarded. P0524:00 - Engine oil pressure too low. This is caused by a drop in engine oil pressure due to a piece of foreign object stuck on the oil pump pressure relief valve or oil control valve (OCV). The temporary entry of the foreign object triggers a check engine…
• 10111039Jul 21, 2017Equipment, Electrical system. Some customers may complain about one or more warning lights on when they start the vehicle during hot weather. The combination of warning lights mentioned by the customer may include: SCBS, LDWS, HBC. Instrument Cluster Multi-Information Display warning messages may include: Forward Smart City Brake Support Malfunction, Smart Brake System Malfunction, Front Camera Sensor System Malfunction.
• 10111038Jul 21, 2017Electrical system, Equipment. Some customers may complain about the "wrong" phone is connected to the infotainment system. MAZDA CONNECT bluetooth will connect all profiles to devices in order of priority if the last device is not available. This concern may be a normal operation of the CMU connecting to available devices on start up.
• 10120373Jul 12, 2017Electrical system. All Mazda Connect vehicles in new car inventory must be updated to this software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 59.00.502 or later).
• 10111036Jul 12, 2017Electrical system. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.
• 10111042Jul 6, 2017Electrical system, Transmission and drivetrain. Whenever you are reprogramming a PCM or any other module, always use the GR8 Battery Charger in the Power Supply mode to prevent the battery from discharging.
• 10111034Jul 6, 2017Visibility (wipers, defrost, mirrors). CAUTION: DO NOT attempt any repair of the windshield damaged by stone chipping/cracks at the area in front of the Forward Sensing Camera (FSC) and Laser Sensor. Replace the windshield with a new one instead.
• 10111033Jul 6, 2017Exterior lighting. High Beam Control (HBC) system frequently asked questions (FAQ)
• 10111032Jul 6, 2017Forward collision avoidance. Mazda Radar Criose Control (MRCC) system frequently asked questions (FAQ)
• 10111030Jul 6, 2017Lane departure. Blind Spot Monitoring (Advanced BSM) system frequently asked questions (FAQ)
• 10111029Jul 6, 2017Lane departure. Lane Departure Warning System (LDWS) frequently asked questions (FAQ)
• 10111028Jul 6, 2017Brakes. Smart City Brake Support (SCBS) frequently asked questions (FAQ)
• 10120362Jun 23, 2017Electrical system. Some customers may experience that the ?leaving home? light function does not work even it is equipped and properly set. However, ?coming home? light function works properly. This concern only occurs on vehicles equipped with speedometer without multi information display (MID). This may be caused by improper software in the Instrument Cluster (IC).
• 10120360Jun 16, 2017Electrical system. Some customers may experience that the ?leaving home? light function does not work even it is equipped and properly set. However, ?coming home? light function works properly. This concern only occurs on vehicles equipped with speedometer without multi information display (MID). This may be caused by improper software in the Instrument Cluster (IC).
• 10120359Jun 16, 2017Seats. Some vehicles (without power seats) may exhibit a driver seat that gradually moves down by itself. This concern may be caused when a load, which is applied to the seat during braking, exceeds a certain level that could impact the retaining mechanism of the seat lifter causing the seat to gradually move downward. To eliminate this concern, the play in the lift mechanism gears has been reduced.
• 10120356Jun 15, 2017Electrical system. When monitoring the resistance of the air bag modules and pre-tensioner seat belts, the Mazda Modular Diagnostic System (M-MDS) may display a value of only 1/100th of the actual resistance value. This is caused by improper SAS control unit software. To eliminate this from occurring in the future, the SAS control unit software has been modified.
• 10120351Jun 9, 2017Suspension. Some vehicles may exhibit a knocking / squeaking noise from the front shock absorber when driving on rough roads and/or when turning the steering wheel while the vehicle is stopped.The noise may be due to:? Upper front strut bearing (A) damage. (CX-5 and Mazda6)? Squeak type noise between the front strut bearing and coil spring. (CX-3, CX-5 and Mazda6)? The bump stopper (C) may be contacting the strut bearing when…
• 10120348Jun 5, 2017Electrical system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 59.00.502or later).NOTE:For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will removed from the Active Driving Display as part of Mazda?s continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software.
• 10111021Jun 5, 2017Electrical system. In order to do a CMU data retrieval for the new MAZDA CONNECT software, make sure to use version 31 (available on MGSS).
• 10120345Jun 2, 2017Equipment. Some vehicles may exhibit oil residue on the engine front cover from seepage around the joint portion (A) between the cylinder block and head. It becomes very noticable with dust adhesion. In some cases, the area of oil residue extends down to around the joint portion (B) between the engine front cover and the oil pan.
• 10186335May 24, 2017Electrical system. Fctry MESSASGE DISPLAYED after instrument cluster replacement. After the installation of a new instrument cluster, the message "Fctry" is displayed instead of the odometer. Some new instrument clusters are in the factory mode setting. Factory mode cancellation is required.
• 10186334May 22, 2017Electrical system. Display shows inaccurate ambient temperature. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.
• 10118129May 22, 2017Electrical system. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer noticed this symptom.
• 10118128May 16, 2017Electrical system. All Mazda Connect vehicles in new car inventory must be updated to this software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 59.00.502or later).
• 10116229May 16, 2017Electrical system. An update to the MAZDA CONNECT system is now available for download from the Mazda Global Service Support (MGSS) system. The new version number is 59.00.502. Please refer to TSB 09-017/17 for a list of improvements to the system.
• 10116231May 15, 2017Equipment, Electrical system. Some customers may claim that it is impossible or difficult to view the Active Driving Display, even if the position of the display is adjusted through the Settings screen. This is caused by an incorrectly learned zero-point (closed position) of the Active Driving Display. The main reason this happens is because an object (e.g. gloves, paper, etc. ) was placed in the storage area where the mirror and optical…
• 10098385Mar 20, 2017Equipment. The 2017 mazda6 touring trim does not list the following mirror accessories:•auto-dimming rearview mirror with compass•auto-dimming rearview mirror with compass and homelink®. The reason for this change is because the 2017 mazda6 touring now includes smart city brake support (scbs). The scbs hardware does not support the installation of the accessory mirror.
• 10099444Mar 16, 2017Equipment. Permanent dtcs are now displayed with the ids 104 update. The purpose of a permanent dtc is to prevent customers from clearing them by disconnecting the battery cable in order to pass a smog check. All pcm and tcm dtcs that turn on the check engine light can remain as a permanent dtc. They will not turn on the check engine light or cause drivability concerns. If you encounter a permanent dtc, ignore it and diagnose…
• 10111011Mar 9, 2017Exterior lighting. Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limited Warranty term.
• 10111010Mar 9, 2017Wheels. Some vehicles may exhibit an aluminum alloy type wheel(s) having one of the following paint damage conditions shown in the sample photos below.The damage extends to the front surface of the aluminum wheel partly or entirely.
• 10098384Mar 6, 2017Equipment. When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other vehicle becomes “linked” to the vin of that vehicle.
• 10111007Mar 3, 2017Engine cooling. Some vehicles may exhibit oil residue on the engine front cover from seepage around the joint portion (A) between the cylinder block and head. It becomes very noticable with dust adhesion. In some cases, the area of oil residue extends down to around the joint portion (B) between the engine front cover and the oil pan.
• 10111006Mar 2, 2017Suspension. Some vehicles may exhibit a knocking / squeaking noise from the front shock absorber when driving on rough roads and/or when turning the steering wheel while the vehicle is stopped. The noise may be due to: *upper front strut bearing (A) damage. (CX-5 and Mazda6) *squeak type noise between the front strut bearing and coil spring. (CX-3, CX-5 and Mazda6) *the bump stopper (C) may be contacting the strut bearing when…
• 10111005Mar 2, 2017Engine cooling. When the engine is started for the first time after parking the vehicle overnight in cold conditions (below 32 degrees Fahrenheit / 0 degrees Celsius), some vehicles may exhibit a rough idle and/or the check engine light on with any of the following DTC(s) stored in memory.?P0300 - Random misfire detected ?P0301 - Cylinder No.1 misfire detected ?P0302 - Cylinder No.2 misfire detected ?P0303 - Cylinder No.3 misfire…
• 10111004Mar 1, 2017Air bags, Electrical system, Equipment. When monitoring the resistance of the air bag modules and pre-tensioner seat belts, the Mazda Modular Diagnostic System (M-MDS) may display a value of only 1/100th of the actual resistance value. This is caused by improper SAS control unit software. To eliminate this from occurring in the future, the SAS control unit software has been modified.
• 10186323Feb 27, 2017Equipment. Recall 0516j updated repair procedure
• 10185820Feb 14, 2017Electrical system. Owner Notification program ONP07 Mazda mobile start (MMS) system
• 10185817Feb 8, 2017Electrical system. Stopper plates for air bag module connectors have been established as new service parts
• 10185813Feb 8, 2017Equipment, Electrical system. If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
• 10185810Jan 23, 2017Electrical system. All models - Stopper plates for air bag module coinnectors
• 10186261Dec 22, 2016Electrical system, Lane departure, Equipment. Multi-Model - Blind Spot Monitoring (BSM) System Change (update)
• 10186263Dec 19, 2016Electrical system, Equipment. MAZDA Mobile start (MMS) cannot communicate with vehicle
• 10186253Dec 13, 2016Electrical system, Equipment, Transmission and drivetrain. Air intake mode does not work after repair of rain sensor, FBCM, IC, PCM, or TCM. After performing any one of the following repairs, the air intake link at the blower unit may disengage and result in the HVAC systemnot switching between recirculation and fresh air modes. * Replacing rain sensor * Replacing front body control module (FBCM) * Replacing instrument cluster (IC) * Reprogramming any control unit (PCM…
• 10185822Oct 25, 2016Fuel system, Back-over prevention (rear camera). Unusual engine noise after a cold engine start. Some customers may complain about an unusual noise coming from the engine compartment for about 20 seconds after a cold engine start. This noise is a normal engine operation for improved exhaust gas emissions. The noise does not indicate a malfunction.
• 10186927Oct 7, 2016Electrical system. Turn signal switch does not cancel
• 10186926Oct 7, 2016Engine cooling. Maintenance monitor engine oil data reset
• 10186922Oct 7, 2016Electrical system. 2017 Mazda 3 and 6 - Do not update the Mazda connect system with an earlier version of software.
• 10186918Oct 7, 2016Electrical system. New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.
• 10092584Aug 26, 2016Engine. There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. This service bulletin is to inform you about the water pump sealing mecha-nism and the criteria if replacement is necessary or not.

← All problems reported for the 2017 Mazda MAZDA6