2017 Mazda MAZDA6 Technical Service Bulletins

516 technical service bulletins (TSBs) are on record for the 2017 Mazda MAZDA6. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10085276Aug 16, 2016Electrical system. The 2017 mazda3 and mazda6 have the latest mazda connect software (version 59). Do not attempt to update with the software version available on ms3 (version 55). If you update to an earlier version of software, the cmu will need to be sent in and reprogrammed. Contact technical hotline if this happens for shipping information.
• 10092487Aug 11, 2016Equipment. Raising a vehicle with a jack can be dangerous if not done properly. The vehicle can slip off the jack and seri-ously injure someone. In this service information, some important warnings and cautions have been taken from the owner’s manual. For mazda customers who have questions about safely lifting their vehicle to change a flat tire or to install snow chains, please provide a copy of the attached handout for them.
• 10084949Aug 10, 2016Equipment. When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other vehicle becomes “linked” to the vin of that vehicle.
• 10091610Jul 22, 2016Body and structure. When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
• 10090763Jul 22, 2016Body and structure. When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
• 10085383Jul 8, 2016Electrical system. Ids update 101.00 and 101.02 is now available on ms3 under the "ids/infotainment" tab.
• 10092724Jun 24, 2016Engine. If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold.
• 10092719Jun 24, 2016Brakes. In certain conditions, smart city brake support (scbs) may operate unintentionally. The owner's manual provides 7 examples: objects on the road at the entrance to a curve.vehicles passing in the opposite lane while making a curve.metal objects, bumps, or protruding objects on the road.when passing through a toll gate.when passing under a vinyl curtain or flag.plastic objects such as pylons.two-wheeled vehicles…
• 10085289Jun 24, 2016Engine. If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold.
• 10085288Jun 24, 2016Brakes. In certain conditions, smart city brake support (scbs) may operate unintentionally. The owner's manual provides 7 examples: objects on the road at the entrance to a curve.vehicles passing in the opposite lane while making a curve.metal objects, bumps, or protruding objects on the road.when passing through a toll gate.when passing under a vinyl curtain or flag.plastic objects such as pylons.two-wheeled vehicles…
• 10092921Jun 22, 2016Seats. At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.this service bulletin is only for sublet repair. A qualified upholstery repair specialist is required for this repair procedure. Please…
• 10092065Jun 22, 2016Seats. At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.this service bulletin is only for sublet repair. A qualified upholstery repair specialist is required for this repair procedure. Please…
• 10092322May 27, 2016Engine. Workshop manual evap system leak inspection using the m-mds has been discontinued for some models. Instead, the workshop manual evap system leak inspection using evap leak tester will be used to troubleshoot evap system leaks.
• 10092421Apr 28, 2016Electrical system. When reprogramming a control module, always use the gr-8 battery management system power supply mode. If not used, the control module reprogramming may fail due to a weak vehicle battery.the gr-8 battery management system power supply mode prevents the vehicle battery from being discharged. This allows the ids to reprogram a control module without interference from a weak or undercharged vehicle battery.
• 10092413Apr 28, 2016Exterior lighting. Some customers may complain about improper operation of the auto-dimming mirror. This may be caused by an obstruction of the front and/or rear light sensor(s) (e.g. Hanging a parking permit from the mirror). Use a soft cloth with mild detergent to clean the mirror. Harsh detergent may damage the front and/or rear light sensor(s).
• 10186917Jan 1, 2016Electrical system. Mazda connect software version 59.00.441 available - Important Update. Used the Labor Op Code in the TSB to update these vehicles with a customer concern until an updated TSB is published.

← All problems reported for the 2017 Mazda MAZDA6