2025 Mercedes-Benz GLE 350 4MATIC Technical Service Bulletins

226 technical service bulletins (TSBs) are on record for the 2025 Mercedes-Benz GLE 350 4MATIC. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 11014412Feb 3, 2025Brakes. Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy AMG brake systems are designed for high loads. This can result in noises under certain operating conditions and driving styles. Please refer to the Operator's Manual for further information such as care and maintenance instructions (washing vehicle directly after heavy use and…
• 11013996Feb 3, 2025Electrical system, Forward collision avoidance, Lane departure. Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data.
• 11013194Jan 28, 2025Electrical system. Complaint Head-up display permanently or sporadically unavailable - with warning message in driver display (see attachment) Head-up display permanently or sporadically unavailable - without warning message in driver display Display permanently or sporadically discolored and out of focus (see attachment) Cause Under analysis Remedy A software remedy is currently being developed. The LI will be updated once it…
• 11013183Jan 28, 2025Suspension. Complaint Creaking noise, in irregular sequence when driving slowly in combination with slight steering movements. Sound file attached for comparison. NOTE: Steering functionality is not affected. For 192 and 232: Only affects vehicles in the below FIN range. FIN range up to: Model series 192: xxx xxx xx 002 876 Model series 232: xxx xxx xx 022 312 Cause Contact area between wheel bearing and steering knuckle.
• 11013339Jan 27, 2025Electrical system. Complaint Symptoms with driver display and/or central display Cause Under analysis Remedy NOTE: Please do not replace any parts. If you have symptoms with one or both displays, a TIPS case must be created. The TIPS case will be reviewed by MBUSA and GCSP. NOTE: Please perform the following steps before creating a TIPS case: Step 1: Check software release of the following control units to see if they are up to date…
• 11013192Jan 24, 2025Body and structure. Complaint Fuel door may require several attempts to open. Please note that if the complaint "Fuel filler flap not opening" occurs, it is important to check the fuel filler flap before replacing the central locking actuator. For gasoline hybrid vehicles where the fuel filler flap fails to open or does so but slowly, observe the document "Fuel filler flap fails to open or does so but slowly on plug-in HYBRID gasoline…
• 11013179Jan 24, 2025Fuel system. Complaint Customer-perceived problem: • Fuel gauge reading implausible • MIL ON (market-dependent) N118/3 Fault codes in control units FSCM_GEN4/5/6 • For these fault codes, the tests contained in XENTRY must be carried out P046109 / P206609 / P13E600 • For these fault codes, the connector couplings/wiring harness routing must be checked for damage P206600 / P046100 Cause Various Remedy Carry out XENTRY tests for…
• 11013177Jan 24, 2025Engine. Complaint Check engine light on. Engine in limp-home mode. Rough running. Low fuel rail pressure fault code P008700 stored in MRG2 control unit. Additional faults below may be stored in MRG2 control unit: Misfire- P030000, P030100, P030200, P030300, P030400, P030084, P030004 Mixture adaptation- P217800 P218762, P017100, P017200, P217700 Injector malfunction- P02EE00, P02EF00, P02F000, P02F100, P214601, P214901…
• 11013077Jan 18, 2025Engine, Fuel system. Complaint Check engine light on. Engine in limp-home mode. Rough running. Low fuel rail pressure fault code P008700 stored in MRG2 control unit. Additional faults below may be stored in MRG2 control unit: Misfire- P030000, P030100, P030200, P030300, P030400, P030084, P030004 Mixture adaptation- P217800 P218762, P017100, P017200, P217700 Injector malfunction- P02EE00, P02EF00, P02F000, P02F100, P214601, P214901…
• 11012910Jan 17, 2025Engine. Complaint Check engine lamp activated, coolant warning message, and engine fan running at full speed. Below fault codes stored in N127 PTCU related to LIN network components. U063200, U063287, U02A900, U02A987, U0698E4, U0698E5, U02C800, U02C887, U063B00, U063B87 Cause Under analysis. Remedy Disconnect 12V battery and leave for 20 minutes. Reconnect battery and clear fault codes. Perform 2 test drives, with at…
• 11013298Jan 16, 2025Transmission and drivetrain. Complaint Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). The clunk is heard once when changing from forward to reverse (and vice versa). Cause If the complaint is eliminated by experimentally loosening the outboard collar nut (by 1 turn), the problem is due to micromovement in the connection between the wheel bearing inner race and the joint housing of the…
• 11013332Jan 15, 2025Transmission and drivetrain. Complaint Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). The noise is heard once in each instance when changing direction of travel. Note: Sound file in attachment Cause If the complaint is eliminated by experimentally loosening the outboard collar nut (by 1 turn), the problem is due to cracking of the microweld between the wheel bearing inner race and the…
• 11013189Jan 14, 2025Electrical system. Complaint When using the offroad display in the MBUX, the "Transparent hood" function cannot be activated using the camera symbol. Cause MBUX FUP5 software: • E504.3 (A 297 904 97 00) • E504.4 (A 297 904 03 01) Remedy Update of head unit A26/17 to the new software: FUP5 opt. E505.4 (A 297 904 05 01)
• 11012836Jan 10, 2025Electrical system. Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY21-25 C-Class, CLA, EQB, AMG GT, EQE, EQS, G-CLASS, GLB, GLC, GLE, GLS, S-CLASS, AMG SL (206, 118, 243, 290, 192, 294, 295, 296, 297, 465, 247, 254, 167, 223, and 232 platform) vehicles, the MBUX multimedia system does not correspond with the latest series production configuration. The MBUX multimedia system control unit…
• 11013292Jan 9, 2025Engine. Complaint Engine idle fluctuates or stumbles at approximately 7 second interval. No relevant fault codes are stored. Cause Torque signal mismatch between MRG and PTCU control units. Only effects version 20B of PTCU. Remedy Software solution in development and LI will be updated once an ETA is available. Replacing parts will not resolve this symptom. Vehicle can be released to owner if there are no other symptoms…
• 11012789Jan 9, 2025Electrical system, Visibility (wipers, defrost, mirrors), Exterior lighting. Complaint Please note that the exact quick test conditions must be met as seen below. If not exactly as listed below, there is no need to create a TIPS case referencing this LI unless further assistance is needed outside of this document. Conditions Instrument Cluster Message: "Park Assist Inoperative" and B223263 with Bosch-ID C259; A+S (Active and Stored) and B223255 with Bosch-ID 1B5D; A+S (Active and Stored)…
• 11012802Jan 8, 2025Steering. Complaint Play noticeable in the height adjustment of the steering column. See arrow direction in attached pictures. Cause Slipped thrust bearing ring on the height adjustment. Remedy Install repair kit for height adjustment of the steering column. For tightening torque, see attachment.
• 11012806Jan 6, 2025Lane departure, Electrical system. Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data.
• 11012787Jan 3, 2025Electrical system. Complaint The vehicle's position on the map is displayed far away from its actual position, e.g. the vehicle is displayed as being in the middle of the ocean. Note: In the quick test, no relevant DTC is displayed for this. Cause The GNSS antenna is not correctly inserted at the GNSS connection (see picture in the attachment) in the head unit (A26/17). Remedy Insert the connector into the GNSS connection and ensure…
• 11012059Dec 20, 2024Electrical system, Engine. Complaint Engine warning light active. Fault code P012D12 The pressure sensor upstream of exhaust gas turbocharger has short circuit to positive. There is a short circuit to positive. is stored in the control unit N3/10 N3/10 - engine electronics 'MED41''M264'. Cause In the course of a pre-repair, the lines may be damaged due to the feed line to component part B28/11 pressure sensor downstream of air filter being…
• 11012055Dec 19, 2024Engine. Complaint Low engine oil level warning. Engine oil leak under vehicle. Cause Rear crankshaft radial seal rolled during installation Remedy -Check for external oil leak with visual inspection. -Remove inspection cover on left side of transmission and check for oil in bell housing. -If oil is found in bell housing, remove transmission and determine location of leak. Replace rear crankshaft sealing ring if found…
• 11012053Dec 19, 2024Engine. Complaint Coolant level warning in instrument cluster. Coolant odor or leaking from coolant expansion reservoir. Cause Level sensor electrical connections not present in expansion reservoir. Remedy 1. Inspect expansion tank level sensor electrical connection for missing contacts. Additionally the triangular sticker will not be present on top of reservoir. See example of OK and NOK part. 2. Replace expansion…
• 11011767Dec 6, 2024Electrical system. Complaint <p> After a software update, the MBUX multimedia system (A26/17) may incorrectly display the fault code B19C804 "Software tampering has been detected. There is an internal fault". </p> <p> </p> <p> Note: If there are no relevant customer complaints, then the DTC can be ignored as it does not directly affect functionality. If there is a customer complaint in addition to the above DTC, further diagnostic…
• 11011557Dec 6, 2024Engine. Complaint Check engine lamp activated, coolant warning message, and engine fan running at full speed. Below fault codes stored in N127 PTCU related to LIN network components. U063200, U063287, U02A900, U02A987, U0698E4, U0698E5, U02C800, U02C887, U063B00, U063B87 Cause Under analysis. Remedy Disconnect 12V battery and leave for 20 minutes. Reconnect battery and clear fault codes. Perform 2 test drives, with at…
• 11011544Dec 4, 2024Electrical system. Complaint Symptoms with driver display and/or central display Cause Under analysis Remedy NOTE: Please do not replace any parts. If you have symptoms with one or both displays, a TIPS case must be created. The TIPS case will be reviewed by MBUSA and GCSP. NOTE: Please perform the following steps before creating a TIPS case: Step 1: Check software release of the following control units to see if they are up to date…
• 11011553Dec 3, 2024Body and structure. Complaint Clanking noise from the area of the speakers in the doors. Cause Under analysis. Remedy To narrow down the cause, first of all remove the door trim. • If the noise continues to occur even with the door trim removed, then continue the diagnosis working towards the speaker and if necessary, create a TIPS case with an informative video as an attachment.

← All problems reported for the 2025 Mercedes-Benz GLE 350 4MATIC