2017 Ram 3500 Technical Service Bulletins

394 technical service bulletins (TSBs) are on record for the 2017 Ram 3500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10224744Aug 16, 2017Back-over prevention (rear camera), Exterior lighting, Brakes, Electrical…. Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P202E - Reductant Injector Performance. P218F - Reductant No Flow…
• 10223722Jul 19, 2017Engine cooling, Air bags. EGR Cooler If a customer comes in with a check engine light for P0401, P2281 or P0234 and the,technician has determined the EGR Cooler is plugged with soot, please contact Stephen Alvarado at the STAR Center at (866) 799-1695 ext. (4720271). Cummins Engineering is currently investigating root cause of this condition. If you do not receive an answer or call back within 15 minutes, proceed with normal diagnostics.
• 10223638Jul 15, 2017Equipment. This bulletin involves inspecting and if required, updating the radio software.
• 10223635Jul 13, 2017Equipment. This bulletin provides information regarding the latest Flash Over The Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update.
• 10108546Jul 13, 2017Equipment. "Thermal Expansion Valve (TXV), H-valve For D trucks only; When diagnosing an A/C system leak at the TXV (Thermal Expansion Valve, H-valve), do not replace the TXV unless it has been proven to be defective for function or for a leak. Instead replace just the O-ring(s) part number 05161806AA. For any questions call Matt Mihm cell (248) 736-6542. If no response in 15 minutes, please continue with repair."
• 10223672Jul 7, 2017Transmission and drivetrain. This bulletin involves replacing the transmission assembly.
• 10223639Jul 1, 2017Equipment. This bulletin involves inspecting and if required, updating the radio software.
• 10219843Jun 28, 2017Transmission and drivetrain. Gear set If you are working on a 2017 HD truck with axle whine concern and you're replacing the gear set, please call Mark Houy at cell: (248) 961-1826. If no response within 15 minutes, please proceed with the repair.
• 10138872Jun 28, 2017Equipment. RA2 Radio 5" Uconnect Before replacing this radio, make sure you can reproduce the customer issue. If the radio is locked up, has a blank screen, or no sound, please perform a vehicle battery reset. If radio functionality is resumed, return the vehicle to the customer. If there are any questions or concerns or the vehicle has been in for repair for the same radio concern more than once, please call Rick Gordon at…
• 10138868Jun 28, 2017Transmission and drivetrain. Gear set If you are working on a 2017 HD truck with axle whine concern and you're replacing the gear set, please call Mark Houy at cell: (248) 961-1826. If no response within 15 minutes, please proceed with the repair.
• 10219907Jun 24, 2017Transmission and drivetrain. Flash: 6.4L Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
• 10138930Jun 24, 2017Transmission and drivetrain. Flash: 6.4L Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
• 10219840Jun 21, 2017Engine cooling. Rear Crank Shaft Oil Seal and Retainer Plate For Cummins equipped vehicles only; If you are working on a 2016 or 2017 vehicle ONLY and are replacing the Rear Main Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A$, 05086754A$, 05015705A$. Remove the retainer with the seal installed. Please do not disturb seal in retainer when removing from engine. Please refer to detailed repair instructions…
• 10219836Jun 21, 2017Engine cooling. Oil Pan 2012-2017 Cummins engines with oil pan leaks, please inspect the shallow area of the oil pan for cracks. If cracks are found, please replace as necessary. Cracks are typically found above the cross member area. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return or email [email protected] If you do not receive a response within 15 minutes, please proceed with normal…
• 10138865Jun 21, 2017Engine cooling. Rear Crank Shaft Oil Seal and Retainer Plate For Cummins equipped vehicles only; If you are working on a 2016 or 2017 vehicle ONLY and are replacing the Rear Main Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A$, 05086754A$, 05015705A$. Remove the retainer with the seal installed. Please do not disturb seal in retainer when removing from engine. Please refer to detailed repair instructions…
• 10138863Jun 21, 2017Engine cooling. Pentastar Oil Filter Adapter All vehicles equipped with a 3.2L or 3.6L engine; If replacing the Oil Filter Adapter (OFA) due to a leak detected between OFA and block, an O-ring kit (68191356AA) is now available to repair OFA/Block Interface leaks. Using dye will assist in determining source of leak. Ensure OFA Cap Oring is seated in the proper groove in the cap and not damaged or cut. Engineering is seeking…
• 10138861Jun 21, 2017Engine cooling. Oil Pan 2012-2017 Cummins engines with oil pan leaks, please inspect the shallow area of the oil pan for cracks. If cracks are found, please replace as necessary. Cracks are typically found above the cross member area. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return or email [email protected] If you do not receive a response within 15 minutes, please proceed with normal…
• 10219831Jun 14, 2017Vehicle speed control. Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
• 10138856Jun 14, 2017Vehicle speed control. Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
• 10138902Jun 8, 2017Transmission and drivetrain. Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Some customers may experience when staring a cold engine the vehicle has a rough idle and/or the engine will immediately shut off.
• 10219874Jun 7, 2017Transmission and drivetrain. Transmission Oil Pan Leaking This bulletin involves inspecting and if necessary resealing the transmission oil pan. Some customers or technicians may experience a transmission oil leak. Upon further investigation, a technician may find the transmission oil pan is leaking in this suspected areaFig. 1.Transmission Oil Pan1 - Suspected Leak Area
• 10219830Jun 7, 2017Visibility (wipers, defrost, mirrors). Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248)…
• 10219826Jun 7, 2017Brakes. Brake Pedal Sensor For vehicles with DTC's P0572 or C0042, or complaints of brake lights staying on or cruise control not setting, please use wiTech to check the Brake Pedal Home Position setting and actual pedal resting position under brake pedal status in the ABS module. Before replacing the Brake Pedal Position Sensor, please call Rick Gordon at Cell (248) 630-6281. If no response within 15 minutes, proceed with…
• 10138899Jun 7, 2017Transmission and drivetrain. Transmission Oil Pan Leaking This bulletin involves inspecting and if necessary resealing the transmission oil pan. Some customers or technicians may experience a transmission oil leak. Upon further investigation, a technician may find the transmission oil pan is leaking in this suspected areaFig. 1.Transmission Oil Pan1 - Suspected Leak Area
• 10138855Jun 7, 2017Visibility (wipers, defrost, mirrors). Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248)…
• 10138851Jun 7, 2017Brakes. Brake Pedal Sensor For vehicles with DTC's P0572 or C0042, or complaints of brake lights staying on or cruise control not setting, please use wiTech to check the Brake Pedal Home Position setting and actual pedal resting position under brake pedal status in the ABS module. Before replacing the Brake Pedal Position Sensor, please call Rick Gordon at Cell (248) 630-6281. If no response within 15 minutes, proceed with…
• 10140015Mar 31, 2017Equipment. Shop Certification Program Guidelines
• 10217529Mar 29, 2017Electrical system, Back-over prevention (rear camera). Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor.
• 10217524Mar 29, 2017Body and structure. Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
• 10140010Mar 29, 2017Equipment, Body and structure. Cover - Roof Rack Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allsuspect stock of part numbers:68212041AC,68141170AC,55112738AA.See attachmentsfor identifying suspect material. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
• 10140009Mar 29, 2017Fuel system. Housing Assy - Fuel Filler Door Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allsuspect stock of part numbers:68148794AH,68148794AF,68148794AD,68156453AH,68156453AF, 68156453AD,68161542AE,68161542AD.See attachment for identifying suspect material. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
• 10140008Mar 29, 2017Seats, Equipment. Recliner - Stow and Go: Return Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allstock of following part numbers:68241568AB,68241568AC,68241569AB,68241569AC, 68241570AB,68241571A.Replacement part numbersare 68241568AD,68241569AD,68241570AD,68241571AD, which are in stock and available. Please return suspect partsback toyour facing depot using Return Code…
• 10139997Mar 29, 2017Equipment. Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor.
• 10139992Mar 29, 2017Body and structure. Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
• 10140007Mar 27, 2017Interior lighting, Equipment. Molding Assy ?Frt door day light opening Rt/Lt: Return You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of following part numbers: 57010364AI, 57010365AI, 57010504AJ, 57010505AJ, 68224368AB, 68224369AB. Please return suspect parts back to your facing depot using Return Code 02, before 17 April, 2017.
• 10140006Mar 27, 2017Engine, Engine cooling. 04627694AA Purge Control - Valve You have been identified as either having stock, or have stock in transit to your dealership. Suspect stock of part number: 04627694AA must be returned. See attached for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 17 April, 2017.
• 10140014Mar 22, 2017Equipment. Vehicle Restriction Program - Cummins Enhanced Customer Satisfaction (ECS)
• 10140005Mar 21, 2017Visibility (wipers, defrost, mirrors). 55395241AG Weatherseal - Windshield to Cowl Please return allstock of following part numbers:55395241AG,55395241AE.Replacement ispart number 55395241AH which isin stock and available. Please return suspect partsback toyour facing depot using Return Code 02,before 12April,2017
• 10140013Mar 17, 2017Equipment. Essential Flash Management
• 10140004Mar 17, 2017Latches, locks and linkages, Body and structure. 04589131AG, 04589243AG - Inspect and Return: Liftgate - Latch Assy You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04589131AG, 04589243AG . See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code…
• 10217521Mar 15, 2017Fuel system. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 [email protected], or Joe Lovell (734) 309-6467 [email protected] before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump…
• 10217520Mar 15, 2017Engine cooling. Gasket, Rocker Cover If you are replacing this gasket for an oil leak, please call Steve Alvarado @ (866) 799-1695 ext: 4720271 to arrange for Fastrac shipper
• 10139989Mar 15, 2017Engine cooling. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 [email protected], or Joe Lovell (734) 309-6467 [email protected] before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump…
• 10139988Mar 15, 2017Engine cooling. Gasket, Rocker Cover If you are replacing this gasket for an oil leak, please call Steve Alvarado @ (866) 799-1695 ext: 4720271 to arrange for Fastrac shipper
• 10140003Mar 14, 2017Electrical system. R4801865AC Alternator Assy - 220 Amp You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of part number R4801865AC. Replacement is part number 04801865AE which is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 04 April, 2017.
• 10217557Mar 10, 2017Exterior lighting. Flash: Dosing Control Unit Diagnostic And System Improvements This bulletin involves reprogramming the Dosing Control Unit (DCU) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination specifically in cold weather. Upon further investigation, a technician may find the following Diagnostic Trouble Code (DTC): P207F - Reductant Quality Performance.
• 10140025Mar 10, 2017Electrical system. Flash: Dosing Control Unit Diagnostic And System Improvements This bulletin involves reprogramming the Dosing Control Unit (DCU) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination specifically in cold weather. Upon further investigation, a technician may find the following Diagnostic Trouble Code (DTC): P207F - Reductant Quality Performance.
• 10217508Mar 8, 2017Visibility (wipers, defrost, mirrors). Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times.
• 10139978Mar 8, 2017Seat belts. Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
• 10139976Mar 8, 2017Visibility (wipers, defrost, mirrors). Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times.

← All problems reported for the 2017 Ram 3500