2006 Toyota Sienna Technical Service Bulletins

238 technical service bulletins (TSBs) are on record for the 2006 Toyota Sienna. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10132639Dec 9, 2014Electrical system. Electronic Communication: In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program. This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid…
• 10132631Dec 9, 2014Electrical system. Region Letter: In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program. This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010…
• 10109397Nov 24, 2014Equipment, Body and structure, Electrical system, Suspension. Region Letter: Safety Recall completion is important not only in satisfying government requirements but also is an integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners…
• 10109394Nov 24, 2014Body and structure, Suspension, Equipment, Electrical system. Region Letter: Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10109408Oct 16, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to assist in the identification and location of serial numbers on 2006 -2014 model year remanufactured automatic transmissions.
• 10109404Oct 16, 2014Transmission and drivetrain. TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
• 10109493Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to assist in the identification and location of serial numbers on 2006 - 2014 model year automatic transmissions.
• 10109492Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
• 10132715Jul 25, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132708Jul 7, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132762Jun 12, 2014Electrical system. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW).
• 10132812May 1, 2014Engine, Back-over prevention (rear camera). Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
• 10131819Apr 17, 2014Steering. This bulletin is now obsolete. Please see T-SB-0030-14 .
• 10131818Apr 17, 2014Steering. A new repair procedure and overhaul kit have been developed for repairing the power steering rack to improve the overall serviceability and reduce ownership cost. This repair procedure only applies to vehicles where the steering rack leak is originating from the right (passenger) side and is the OEM steering rack assembly.
• 10133777Apr 4, 2014Equipment. Safety Recall completion is important not only in satisfying government requirements but also is an integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners receive the Follow-Up…
• 10133774Apr 4, 2014Equipment. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10133720Apr 4, 2014Visibility (wipers, defrost, mirrors), Tires. Safety Recall completion is important not only in satisfying government requirements but also is an integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners receive the Follow-Up…
• 10133717Apr 4, 2014Visibility (wipers, defrost, mirrors), Tires. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10131933Feb 28, 2014Equipment. Customer complains of Bluetooth connectivity concerns such as: Difficulty to pair phone, Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their…
• 10131928Feb 5, 2014Equipment, Brakes. A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general tips for the inspection and/or installation of Toyota Complete Maintenance Care (TCMC) front brake pads and discs. Always refer to the model specific Repair manual and TIS…
• 10131968Jan 23, 2014Air bags. Toyota has received reports regarding excessive electrical resistance in the Side Airbag connector of certain 2004 to 2009 Model Year Sienna vehicles. The connector could have been improperly crimped during the manufacturing process. In certain cases, oxidization buildup in the connector can occur resulting in illumination of the airbag warning lamp.
• 10131951Jan 23, 2014Tires. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur.
• 10131967Jan 22, 2014Air bags. In our continuing efforts to help ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for the Side Airbag Connector on certain 2004 to 2009 Model Year Toyota Sienna vehicles.
• 10055245Jan 22, 2014Air bags, Electrical system. Toyota: see document search button for owner letter. There is an excessive electrical resistance, on some vehicles, where the connector had been improperly crimped, during time of manufacturing, and oxidization buildup, in connector, result in an illumination of airbag warning lamp. See tsb-0069-12 rev 2. Model 2004-2009 sienna.
• 10131949Jan 17, 2014Air bags. Some 2004 ? 2009 model year Sienna vehicles may exhibit an SRS lamp ?ON? condition with Diagnostic Trouble Code (DTC) B0111 and/or B0116. An updated repair procedure is available to address this condition. Follow the procedures in this bulletin to repair the floor harness and the side airbag squib circuit.
• 10131961Jan 14, 2014Air bags. Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
• 10131993Dec 19, 2013Visibility (wipers, defrost, mirrors). This bulletin is now obsolete. Please see T-SB-0185-13.
• 10131988Dec 19, 2013Visibility (wipers, defrost, mirrors). The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
• 10132055Nov 4, 2013Seats, Air bags, Equipment. Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in…
• 10132135Oct 24, 2013Equipment, Electrical system. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.
• 10132136Oct 23, 2013Visibility (wipers, defrost, mirrors). The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
• 10132084Oct 1, 2013Transmission and drivetrain. The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
• 10132156Sep 13, 2013Equipment. If a customer states there is an unpleasant odor in the vehicle from the HVAC system, there are various factors that may be involved.
• 10062013Sep 13, 2013Equipment. Summary to be provided on a future date.
• 10131985Sep 12, 2013Equipment. Some 2004 ? 2014 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
• 10131984Sep 9, 2013Equipment, Brakes. A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
• 10062051Aug 1, 2013Equipment. Summary to be provided on a future date.
• 10132048May 22, 2013Tires. Please refer to the following recommendations for the best practices for vehicle tire rotations.
• 10062016May 22, 2013Tires. Summary to be provided on a future date.
• 10132045May 3, 2013Electrical system. Some customers may complain that the Rear Seat Entertainment (RSE) system is inoperative if the have misplaced the parental passcode for the system.
• 10132320Apr 23, 2013Seats, Electrical system. Some customers may complain that the Rear Seat Entertainment (RSE) system is inoperative if they have misplaced the parental passcode for the system.
• 10132295Apr 23, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0054-13.
• 10132287Apr 23, 2013Equipment. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
• 10132281Apr 4, 2013Body and structure, Back-over prevention (rear camera). If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.
• 10133860Feb 27, 2013Electrical system. The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.
• 10133836Feb 20, 2013Transmission and drivetrain. This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.
• 10133867Feb 7, 2013Equipment. SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.
• 10133901Jan 29, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0012-13.
• 10133897Jan 29, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the TIS and the CUW.
• 10133896Jan 22, 2013Equipment. Some 2004 ? 2009 model year Sienna vehicles may exhibit an SRS lamp ?ON? condition with Diagnostic Trouble Code (DTC) B0111 and/or B0116. An updated repair procedure is available to address this condition. Follow the procedures in this bulletin to repair the floor harness and the side airbag squib circuit.

← All problems reported for the 2006 Toyota Sienna