2013 Toyota SiennaService bulletins
2013 Toyota Sienna Technical Service Bulletins
376 technical service bulletins (TSBs) are on record for the 2013 Toyota Sienna. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.
- 10075949Sep 25, 2013Equipment. Some users may experience no sound from the Pandora or iHeartRadio Entune Applications after attaching the iPhone USB cable to the multimedia system. This can also occur if the user chooses the iPod selection on the multimedia system and then attempts to return to Pandora or iHeartRadio Entune Applications. This condition occurs with iPhones running iOS 6.0 and later
- 10062019Sep 25, 2013Equipment. Summary to be provided on a future date.
- 10132160Sep 24, 2013Equipment. Some users may experience no sound from the Pandora or iHeartRadio Entune Applications after attaching the iPhone USB cable to the multimedia system. This can also occur if the user chooses the iPod selection on the multimedia system and then attempts to return to Pandora or iHeartRadio Entune Applications. This condition occurs with iPhones running iOS 6.0 and later.
- 10132157Sep 13, 2013Equipment. To receive satellite radio functions after the initial trial period has expired, the customer must enter into a contract with XM Satellite Radio Inc. After entering into a contract, registration of an 8-digit XM Radio ID is required. This 8-digit XM Radio ID is found by turning to channel ?0? of the satellite radio.
- 10132156Sep 13, 2013Equipment. If a customer states there is an unpleasant odor in the vehicle from the HVAC system, there are various factors that may be involved.
- 10062058Sep 13, 2013Equipment. Summary to be provided on a future date.
- 10062013Sep 13, 2013Equipment. Summary to be provided on a future date.
- 10131985Sep 12, 2013Equipment. Some 2004 ? 2014 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
- 10131984Sep 9, 2013Equipment, Brakes. A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
- 10131979Sep 5, 2013Transmission and drivetrain. Some 2012 ? 2013 model year Camry, Venza, and 2013 model year Avalon and Sienna vehicles equipped with 2GR-FE engines may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P219A or P219B present. The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition occurring. Please follow the repair procedure below to address this…
- 10132155Sep 3, 2013Equipment. Some customers may experience A/C is inoperative with the DTC B1479 present. This can be caused by debris stuck in the flow control valve.
- 10075958Sep 3, 2013Equipment. Some customers may experience A/C is inoperative with the OTC 81479 present. This can be caused by debris stuck in the flow control valve
- 10062059Sep 3, 2013Equipment. Summary to be provided on a future date.
- 10062057Aug 27, 2013Equipment. Summary to be provided on a future date.
- 10132205Aug 13, 2013Equipment, Electrical system. An Initialization Process is required to activate the Entune? suite of Apps & Data Services on Premium HDD Navigation with Entune? and Display Navigation with Entune? head units before they are used for the first time on new vehicles. The Initialization Process may also need to be performed under other circumstances such as following a head unit replacement or after the customer?s personal settings are erased.
- 10062054Aug 12, 2013Body and structure. Summary to be provided on a future date.
- 10062009Aug 2, 2013Equipment. Summary to be provided on a future date.
- 10132269Jul 25, 2013Visibility (wipers, defrost, mirrors). Tips for writing a DPR (Dealer Product Report) on manufacturing issues for windows and windshields.
- 10062053Jul 25, 2013Body and structure. Summary to be provided on a future date.
- 10132239Jul 11, 2013Equipment. The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
- 10061589Jul 11, 2013Equipment. Summary to be provided on a future date.
- 10132048May 22, 2013Tires. Please refer to the following recommendations for the best practices for vehicle tire rotations.
- 10062016May 22, 2013Tires. Summary to be provided on a future date.
- 10132046May 14, 2013Equipment. On some Highlander, Sienna, and Sequoia vehicles, a plastic clamp connecting the rear A/C lines may become loose. This may allow separation of the A/C lines and a loss of refrigerant.
- 10062046May 14, 2013Equipment. Summary to be provided on a future date.
- 10132295Apr 23, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0054-13.
- 10132287Apr 23, 2013Equipment. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
- 10132284Apr 17, 2013Visibility (wipers, defrost, mirrors). After initial start-up in cold weather conditions, the front windshield defroster pattern may not meet customer expectations. An updated A/C amplifier is available that improves the front windshield defroster pattern.
- 10061566Apr 17, 2013Equipment. Summary to be provided on a future date.
- 10132316Apr 4, 2013Equipment. Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.
- 10132281Apr 4, 2013Body and structure, Back-over prevention (rear camera). If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.
- 10062044Apr 4, 2013Equipment. Summary to be provided on a future date.
- 10133809Mar 25, 2013Engine. Starting with 2010 Model Year, Toyota began a gradual transition to the use of synthetic 0W-20 viscosity engine oil. There a re man benefits of this oil.
- 10062010Mar 25, 2013Equipment. Summary to be provided on a future date.
- 10133786Mar 15, 2013Engine. Immediately following a cold soak startup, some 2009 ? 2013 model year vehicles equipped with 1AR-FE or 2AR-FE engines may exhibit a brief knock/rattle noise from the engine compartment for approximately one second. Follow the repair procedure below to address this condition.
- 10061557Mar 15, 2013Engine. Summary to be provided on a future date.
- 10054846Mar 15, 2013Engine. Toyota: on certain vehicles, a knock or rattle noise, coming from engine compartment, is heard during a cold soak startup, and the condition lasts approximately one second. Model years 2009-2012 camry, highlander, sienna, venza, rav4.
- 10053959Mar 15, 2013Engine. Toyota: there is a knocking or rattling noise coming from engine compartment, for a short period of time, after a cold soak startup. Model 2010-2012 camry, 2009-2013 highlander, venza, 2009-2012 rav4, 2011-2013 sienna.
- 10133860Feb 27, 2013Electrical system. The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.
- 10133857Feb 25, 2013Steering. The vehicle will not start or ready-on and the steering wheel lock is engaged so that the steering wheel may only be turned very little from side-to-side.
- 10062035Feb 25, 2013Steering. Summary to be provided on a future date.
- 10133836Feb 20, 2013Transmission and drivetrain. This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.
- 10133835Feb 19, 2013Equipment. Some customers may inquire about the frequency and power output of the Smart Key/Smart Entry systems used on various models. The Smart Key/Smart Entry systems conform to all applicable FCC rules. This bulletin details the applicable specifications for these systems.
- 10133867Feb 7, 2013Equipment. SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.
- 10133901Jan 29, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0012-13.
- 10133897Jan 29, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the TIS and the CUW.
- 10133890Jan 10, 2013Equipment. Some 2013 model year vehicles are equipped with a Smart Key system, which allows the customer to enter and start the vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected during Pre-Delivery Service (PDS). The following inspection procedure has been developed to confirm the proper operation of the Smart Key…
- 10133889Jan 10, 2013Equipment. 2013 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate installation procedure to attach the driver?s side, and if applicable, the passenger?s side and rear seat floor mats to the vehicle carpet using the floor…
- 10133888Jan 10, 2013Tires. The purpose of this bulletin is to provide a procedure to adjust tire pressure correctly when outside temperature is significantly colder or warmer than shop temperature. Seasonal temperature change can dramatically alter tire pressure, which can cause the tire pressure warning lamp to illuminate.
- 10133915Jan 3, 2013Air bags. Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
← All problems reported for the 2013 Toyota Sienna
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 31, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.