2004 Toyota Tundra Technical Service Bulletins

185 technical service bulletins (TSBs) are on record for the 2004 Toyota Tundra. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10131713Jan 11, 2018Equipment. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of…
• 10197494Dec 12, 2017Equipment. Technician Certification Requirements.
• 10133654Nov 22, 2017Electrical system. TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent…
• 10133649Nov 21, 2017Equipment. TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
• 10123430Oct 30, 2017Equipment. TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures…
• 10123420Oct 27, 2017Body and structure. TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
• 10132410Jul 20, 2017Air bags, Equipment. TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain…
• 10152205Jan 6, 2017Electrical system. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the…
• 10132930Nov 29, 2016Electrical system. TSB: OBSOLETE NOTICE: September 14, 2016: This bulletin is now obsolete. Please see T-SB-0134-16.
• 10132901Nov 10, 2016Equipment. TSB: REVISION NOTICE November 10, 2016 Rev2: ? Applicability has been updated to include 2016 ? 2017 model year Toyota vehicles. ? Parts Information section has been updated. Some 2004 ? 2017 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to…
• 10150418Sep 14, 2016Electrical system. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW).
• 10149217Sep 14, 2016Engine. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW).
• 10145776Jul 21, 2016Equipment. Update on Technician Certification Requirements.
• 10134140Jan 11, 2016Electrical system. Tech Tip: Some customers may experience difficulty programming HomeLink.
• 10096097Jan 11, 2016Equipment. Tech tip: some customers may experience difficulty programming homelink.
• 10134223Sep 15, 2015Electrical system, Engine. TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.
• 10096556Sep 15, 2015Engine, Electrical system. Tt: the vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the engine ecm has been interrupted.
• 10134454Aug 24, 2015Transmission and drivetrain. TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.
• 10132529Aug 24, 2015Engine, Electrical system. TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.
• 10134467Aug 6, 2015Equipment. Electronic Communication: Quick Reference Guide - Due to the expiration of LSC DSD, on August 5, 2015 all VINs were marked expired in TIS. As a result, claims submitted after this date will automatically be rejected in the CPS warranty system. In order for your dealership to receive payment for vehicles serviced under LSC D0D your dealership must do the following:
• 10134466Aug 6, 2015Equipment. Electronic Communication: Quick Reference Guide - Due to the expiration of LSC D0D, on August 5, 2015 all VINs were marked expired in TIS. As a result, claims submitted after this date will automatically be rejected in the CPS warranty system. In order for your dealership to receive payment for vehicles serviced under LSC D0D your dealership must do the following:
• 10132542Aug 6, 2015Body and structure. Electronic Communication: Quick Reference Guide - Due to the expiration of LSC DSD, on August 5, 2015 all VINs were marked expired in TIS. As a result, claims submitted after this date will automatically be rejected in the CPS warranty system. In order for your dealership to receive payment for vehicles serviced under LSC D0D your dealership must do the following:
• 10132541Aug 6, 2015Body and structure. Electronic Communication: Quick Reference Guide - Due to the expiration of LSC D0D, on August 5, 2015 all VINs were marked expired in TIS. As a result, claims submitted after this date will automatically be rejected in the CPS warranty system. In order for your dealership to receive payment for vehicles serviced under LSC D0D your dealership must do the following:
• 10134237Jul 31, 2015Equipment. DL: These campaigns are expired as of July 31, 2015.
• 10134232Jul 31, 2015Equipment. DL: These campaigns are expired as of July 31, 2015.
• 10132572Jul 31, 2015Body and structure. DL: These campaigns are expired as of July 31, 2015.
• 10132567Jul 31, 2015Body and structure. DL: These campaigns are expired as of July 31, 2015.
• 10111416Jul 23, 2015Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new…
• 10111126Jul 23, 2015Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new…
• 10134234Jul 10, 2015Equipment. EC: LSC DSD expires July 31,2015.
• 10134233Jul 10, 2015Equipment. EC: LSC D0D expires July 31,2015.
• 10132569Jul 10, 2015Body and structure. EC: LSC DSD expires July 31,2015.
• 10132568Jul 10, 2015Body and structure. EC: LSC D0D expires July 31,2015.
• 10111319Jun 25, 2015Body and structure. DL: Customer vehicles that qualify for frame replacement under D0D must have their vehicle inspected on or before July 31, 2015. Frame and ancillary parts orders must be submitted no later than Monday, August 4th, 2015 following the expiration date.
• 10111169Jun 25, 2015Body and structure. DL: Customer vehicles that qualify for frame replacement under D0D must have their vehicle inspected on or before July 31, 2015. Frame and ancillary parts orders must be submitted no later than Monday, August 4th, 2015 following the expiration date.
• 10111321Jun 9, 2015Body and structure. DD: FRAME REPLACEMENT-Customer vehicles that qualify for frame replacement under D0D/DSD must have their vehicle inspected on or before July 31,2015. Frame and ancillary parts orders must be submitted no later than Monday, August 4th, 2015 following the expiration date.CRC APPLICATION - D0D ONLY-Last day of CRC application is July 31, 2015, regardless of vehicle inspection date taking place on or before the…
• 10111171Jun 9, 2015Body and structure. DD: FRAME REPLACEMENT - Customer vehicles that qualify for frame replacement under D0D/DSD must have their vehicle inspected on or before July 31,2015. Frame and ancillary parts orders must be submitted no later than Monday, August 4th, 2015 following the expiration date.CRC APPLICATION - D0D ONLY-Last day of CRC application is July 31, 2015, regardless of vehicle inspection date taking place on or before the…
• 10134491May 15, 2015Equipment. DL: Toyota will be sending Limited Service Campaign Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10134486May 15, 2015Equipment. RL: Toyota will be sending Limited Service Campaign Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10132593May 15, 2015Body and structure. DL: Toyota will be sending Limited Service Campaign Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10132588May 15, 2015Body and structure. RL: Toyota will be sending Limited Service Campaign Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
• 10111562May 13, 2015Equipment. TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
• 10111179May 13, 2015Equipment. TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
• 10134497May 7, 2015Body and structure. DD: FRAME REPLACEMENT-Customer vehicles that qualify for frame replacement under D0D/DSD must have their vehicle inspected on or before July 31,2015. Frame and ancillary parts orders must be submitted no later than Monday, August 4th, 2015 following the expiration date. CRC APPLICATION ? D0D ONLY-Last day of CRC application is July 31, 2015, regardless of vehicle inspection date taking place on or before the…
• 10132599May 7, 2015Body and structure. DD: FRAME REPLACEMENT-Customer vehicles that qualify for frame replacement under D0D/DSD must have their vehicle inspected on or before July 31,2015. Frame and ancillary parts orders must be submitted no later than Monday, August 4th, 2015 following the expiration date. CRC APPLICATION ? D0D ONLY-Last day of CRC application is July 31, 2015, regardless of vehicle inspection date taking place on or before the…
• 10111390Apr 10, 2015Electrical system. TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase…
• 10111197Apr 10, 2015Electrical system, Equipment. TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase…
• 10111389Apr 9, 2015Equipment. TSB: Some 2004 - 2015 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
• 10111196Apr 9, 2015Equipment. TSB: Some 2004 - 2015 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
• 10134128Jan 15, 2015Engine, Electrical system. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW).

← All problems reported for the 2004 Toyota Tundra