2007 Toyota Tundra Technical Service Bulletins

281 technical service bulletins (TSBs) are on record for the 2007 Toyota Tundra. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10109404Oct 16, 2014Transmission and drivetrain. TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
• 10109403Oct 16, 2014Transmission and drivetrain. TSB: World Standard (WS) Automatic Transmission Fluid (ATF) was introduced to reduce maintenance costs and increase the mileage between scheduled maintenance checks. Here are some important tips when working with ATF-WS in Toyota vehicles requiring it's use.
• 10109463Oct 13, 2014Equipment, Electrical system. Tech Tip: Customer complains of carious Bluetooth connectivity concerns after upgrading to iOS 8.0 and later. Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.
• 10109493Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to assist in the identification and location of serial numbers on 2006 - 2014 model year automatic transmissions.
• 10109492Sep 30, 2014Transmission and drivetrain. TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
• 10132715Jul 25, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132752Jul 18, 2014Equipment. Dealer Letter: Toyota will be sending Limited Service Campaign Notices to remind owners whose vehicles have not yet had Smart Stop Technology installed on their vehicle under LSC BST. Initial notification informing customers of the availability of Smart Stop Technology on certain models was handled by the court appointed administrator Gilardi and Company at the onset of the Class Action Settlement for Economic Loss.
• 10132747Jul 18, 2014Equipment. Region Letter: Toyota will be sending Limited Service Campaign Notices to remind owners whose vehicles have not yet had Smart Stop Technology installed on their vehicle under LSC BST. Initial notification informing customers of the availability of Smart Stop Technology on certain models was handled by the court appointed administrator Gilardi and Company at the onset of the Class Action Settlement for Economic Loss.
• 10056517Jul 18, 2014Equipment. Toyota: on some vehicles, information being sent out regarding installation of smart stop technology. Model years 2003-2010 corolla, corolla matrix, land cruiser, highlander rav4, 4runner, tundra.
• 10132708Jul 7, 2014Equipment. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
• 10132762Jun 12, 2014Electrical system. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW).
• 10132812May 1, 2014Back-over prevention (rear camera), Engine. Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
• 10071462Apr 7, 2014Equipment. Summary to be provided on a future date.
• 10133780Apr 1, 2014Equipment. It has been brought to our attention that claim processing for LSC BST Phase 3 (2003-2009 4Runner and 2007-2010 Tundra vehicles) we be delayed until Monday April 7, 2014.
• 10133723Apr 1, 2014Brakes. It has been brought to our attention that claim processing for LSC BST Phase 3 (2003-2009 4Runner and 2007-2010 Tundra vehicles) we be delayed until Monday April 7, 2014.
• 10133779Mar 31, 2014Equipment. On July 24, 2013, the settlement of claims for Economic Loss arising from allegations of unintended acceleration was approved. As part of the settlement Toyota will be launching the third phase of a Limited Service Campaign to install Smart Stop technology on March 31, 2014., for the following models:
• 10133773Mar 31, 2014Transmission and drivetrain. As part of the settlement described above, Toyota will install Smart Stop Technology on the above listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedal at certain speeds and in certain driving conditions.
• 10133722Mar 31, 2014Vehicle speed control. On July 24, 2013, the settlement of claims for Economic Loss arising from allegations of unintended acceleration was approved. As part of the settlement Toyota will be launching the third phase of a Limited Service Campaign to install Smart Stop technology on March 31, 2014., for the following models:
• 10133716Mar 31, 2014Vehicle speed control, Brakes. As part of the settlement described above, Toyota will install Smart Stop Technology on the above listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedal at certain speeds and in certain driving conditions.
• 10131933Feb 28, 2014Equipment. Customer complains of Bluetooth connectivity concerns such as: Difficulty to pair phone, Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their…
• 10131951Jan 23, 2014Tires. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur.
• 10131961Jan 14, 2014Air bags. Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
• 10131993Dec 19, 2013Visibility (wipers, defrost, mirrors). This bulletin is now obsolete. Please see T-SB-0185-13.
• 10131988Dec 19, 2013Visibility (wipers, defrost, mirrors). The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
• 10132055Nov 4, 2013Air bags, Seats, Equipment. Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in…
• 10132135Oct 24, 2013Electrical system, Equipment. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.
• 10062070Oct 24, 2013Equipment. Summary to be provided on a future date.
• 10132136Oct 23, 2013Visibility (wipers, defrost, mirrors). The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
• 10132084Oct 1, 2013Transmission and drivetrain. The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
• 10132156Sep 13, 2013Equipment. If a customer states there is an unpleasant odor in the vehicle from the HVAC system, there are various factors that may be involved.
• 10062013Sep 13, 2013Equipment. Summary to be provided on a future date.
• 10131985Sep 12, 2013Equipment. Some 2004 ? 2014 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
• 10131984Sep 9, 2013Equipment, Brakes. A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
• 10062051Aug 1, 2013Equipment. Summary to be provided on a future date.
• 10132048May 22, 2013Tires. Please refer to the following recommendations for the best practices for vehicle tire rotations.
• 10062016May 22, 2013Tires. Summary to be provided on a future date.
• 10132295Apr 23, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0054-13.
• 10132287Apr 23, 2013Equipment. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
• 10132281Apr 4, 2013Body and structure, Back-over prevention (rear camera). If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.
• 10133860Feb 27, 2013Electrical system. The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.
• 10133836Feb 20, 2013Transmission and drivetrain. This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.
• 10133867Feb 7, 2013Equipment. SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.
• 10133901Jan 29, 2013Equipment. This bulletin is now obsolete. Please see T-SB-0012-13.
• 10133898Jan 29, 2013Brakes. Some 2007 ? 2012 model year Tundra vehicles may exhibit a rubbing or grinding noise from the rear when making left or right turns. New parking brake plate sub-assemblies have been developed to address this condition.
• 10133897Jan 29, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the TIS and the CUW.
• 10060842Jan 29, 2013Brakes. Summary to be provided on a future date.
• 10133915Jan 3, 2013Air bags. Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
• 10133878Jan 2, 2013Electrical system. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates…
• 10133943Dec 17, 2012Transmission and drivetrain. Some 2007 ? 2010 model year Tundra vehicles may exhibit a howling or growling noise from the rear of the vehicle that increases with vehicle speed. Changes have been made to the rear axle bearing to address this condition. Follow the procedure in the bulletin to address customer concerns.
• 10034128Dec 17, 2012Transmission and drivetrain. Toyota: rear ale bearing abnormal noise. Some vehicles may exhibit a howling or growling noise from the rear of the vehicle that increases with vehicle speed. Changes have been made to the rear axle bearing to correct this condition. *pe updated 12/28/11. *pe updated 2/6/13.

← All problems reported for the 2007 Toyota Tundra