2011 Audi Q7 Technical Service Bulletins

1,053 technical service bulletins (TSBs) are on record for the 2011 Audi Q7. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10068158Sep 25, 2013Equipment. Summary to be provided on a future date.
• 10251000Sep 23, 2013Steering. Squeaking noises when steering or maneuvering
• 10250999Sep 23, 2013Suspension. Shock absorber leaks: assessment aid
• 10250659Sep 23, 2013Steering. Squeaking noises when steering or maneuvering
• 10250658Sep 23, 2013Back-over prevention (rear camera), Body and structure. Shock absorber leaks: assessment aid
• 10243777Sep 23, 2013Equipment. Audi Elsa Newsletter
• 10121365Sep 23, 2013Equipment. Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
• 10121332Sep 23, 2013Wheels, Steering. Supersedes Technical Service Bulletin Group 40 number 12-23 dated May 14, 2012. Squeaking noises are heard when the steering wheel is turned or maneuvered. The noises may be more prevalent in wet weather. The folds of the outer rubber boots on the front axle shafts may come in contact with each other when the steering wheel is turned, causing squeaking noises. These noises are more likely to occur when the vehicle…
• 10121331Sep 23, 2013Suspension. Supersedes Technical Service Bulletin Group 40 number 10-04 dated April 1, 2010. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber. As a result of a leak because the shock absorber is damaged. As a result of residue from when the shock was filled during production, or of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
• 10251016Sep 16, 2013Suspension. Self-leveling compressor inoperative
• 10243780Sep 16, 2013Equipment. Audi Elsa Newsletter
• 10121335Sep 16, 2013Brakes. Supersedes Technical Service Bulletin Group 43 number 13-14 dated April 11, 2013. The self-leveling system can no longer be adjusted with the MMI. The compressor for the self-leveling system continues to run after the engine has been switched off and the vehicle has been locked. DTCs may be stored in the level control system module. Because of poor performance or failure of the air suspension compressor, the…
• 10121342Sep 13, 2013Wheels, Steering. Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have…
• 10121369Sep 12, 2013Electrical system. Supersedes Technical Service Bulletin Group 91 number 13-99 dated August 5, 2013. Sound system ?pops? and loses audio for a few seconds (for vehicles with base sound system). Sound system loses audio for a few seconds and returns on its own (for vehicles with Bose or Bang & Olufsen sound system). If the sound does not return on its own, or is accompanied by relevant DTCs in the vehicle, another issue may be…
• 10068155Sep 12, 2013Equipment. Summary to be provided on a future date.
• 10121367Sep 11, 2013Electrical system. Supersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
• 10121362Sep 11, 2013Electrical system. Supersedes Technical Service Bulletin Group 80 number 13-04 dated August 9, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into…
• 10121324Sep 5, 2013Engine cooling. Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds…
• 10243778Sep 3, 2013Equipment. Audi Elsa Newsletter
• 10124650Aug 30, 2013Steering. Supersedes Technical Service Bulletin Group 48 number 10-09 dated August 13, 2010. Electric steering column adjustment is restricted or does not work at all. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently…
• 10124638Aug 30, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing…
• 10124672Aug 29, 2013Engine cooling. Supersedes Technical Service Bulletin Group 01 number 13-89 dated May 2, 2013. MIL on. A cylinder misfire fault (DTC P0301 - P0306) with DTC P130A is stored in the engine control module (ECM), J623 (address word 01).
• 10124652Aug 28, 2013Steering. Supersedes Technical Service Bulletin Group 48 number 13-43 dated April 19, 2013. The customer may report that the Easy Entry function of the power adjustable steering column intermittently does not work.
• 10124675Aug 20, 2013Engine cooling. Supersedes Technical Service Bulletin Group 01 number 13-01 dated May 29, 2013. MIL on. DTCs are stored in the engine control module. Mileage is greater than 15,000 miles. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
• 10124645Aug 14, 2013Visibility (wipers, defrost, mirrors). Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
• 10124621Aug 14, 2013Engine cooling. As part of Audi's ongoing commitment to our environment, Audi is extending the Emissions Control Systems Warranty to cover cleaning of the engine cylinder head secondary air ports to remove carbon buildup under specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle's original in-service date for certain 2009-12 Model Year Audi vehicles with 3.2L engine, and certain 2009-2013…
• 10124633Aug 13, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 55 number 13-31 dated July 18, 2013. The customer may report that the tail lamp lighting does not switch over from bumper to the lid, with lid closed. The rear bumper lights function normally (brake lights, reverse lights, driving lights, turn signals). The center mount brake light functions normally. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in…
• 10124632Aug 13, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 94 number 13-24 dated July 18, 2013. There is considerable moisture present in the headlamp. The moisture disappears only after extended drives (greater than 10 minutes). There is no external damage to the headlamp which could introduce moisture.
• 10124616Aug 13, 2013Engine cooling. Audi has determined that, under certain driving conditions, carbon buildup can occur in the engine cylinder head secondary air ports. Due to the presence of specific fault codes caused by this carbon buildup, the Malfunction Indicator Lamp (MIL) on the instrument cluster may illuminate. The MIL is part of your on-board diagnostic system. Please refer to your owner's manual for additional information about the MIL.
• 10051857Aug 13, 2013Exterior lighting. Audi: 94 moisture accumulation in headlights. The moisture disappears only after extended drives (greater than 10 minutes). Humid air settles on the inside of the glass, causing moisture to appear in the inside of the headlamp lens.*js updated 12/3/13. *pe updated 12/4/13. *pe updated 12/6/13.
• 10124643Aug 9, 2013Electrical system, Equipment. Supersedes Technical Service Bulletin Group 80 number 13-03 dated May 13, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. "Limp Home" mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the…
• 10053889Aug 9, 2013Engine cooling. Audi: presence of coolant loss inside electrical connector, causes engine warning light to illuminate and temperature of engine to elevate and failure of climate system heating performance. Model 2010-2012 a6, a7, a8, q7, a5 cabriolet, tt, a4, q5.
• 10124629Aug 8, 2013Electrical system, Exterior lighting. The customer may report two or more warning lights are/were illuminated simultaneously. The warning lights may be sporadic, and may not be illuminated by the time the customer brings the vehicle to the workshop. CAN communication DTCs may be found in control modules. There is sporadic data disruption on the CAN bus wiring behind the dashboard, between the left (T46a) and right (T46b) 46-pin CAN disconnect plugs.
• 10124660Aug 7, 2013Brakes. Customer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
• 10124617Aug 6, 2013Electrical system, Equipment. In some vehicles, corrosion can form in the differential pressure sensor, causing the Malfunction Indicator Light (MIL) to come on. If the MIL is on because of this issue, a vehicle will not pass an IM (emissions) inspection. In some vehicles under certain driving conditions, the MIL may come on due to an issue with the Engine Control Module (ECM) software. If the MIL is on because of this issue, the vehicle will…
• 10053915Aug 6, 2013Electrical system, Transmission and drivetrain. Audi: see document search button for owner letter. The differential pressure sensor may have corrosion forming, in some vehicles, which causes a malfunction indicator light (mil) to come on and will not pass emission inspection or a possible problem with engine control module (ecm) software. Model 2009-2012 q7.
• 10124687Aug 5, 2013Equipment, Brakes. This document contains information on the Audi braking guard.
• 10124635Aug 5, 2013Equipment. Sound system "pops" and loses audio for a few seconds (for vehicles with base sound system) or sound system loses audio for a few seconds and returns on its own (for vehicles with Bose or Bang & Olufsen sound system). If the sound does not return on its own, or is accompanied by relevant DTCs in the vehicle, another issue may be present. Verify the root cause before proceeding with this bulletin. HD radio does not…
• 10124610Aug 2, 2013Engine cooling. We would like to inform you of an upcoming Emissions Service Action 23L2. This service action in in regards to the differential pressure sensor/ECM software update.
• 10124648Aug 1, 2013Latches, locks and linkages. Supersedes Technical Service Bulletin Group 57 number 11-49 dated August 8, 2011. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle "locked itself". The lock command history is stored in the convenience system control module (J393).
• 10124581Jul 30, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 12-38 dated March 2, 2012. When a phonebook with a large number of contacts is being downloaded, the MMI screen freezes in one of the following scenarios: * After the initial Bluetooth connection (shortly after the phone is bonded to the vehicle), the screen freezes briefly. * After the ignition is switched on (shortly after the phone automatically reconnects…
• 10243791Jul 29, 2013Equipment. Audi Elsa Newsletter
• 10243790Jul 22, 2013Equipment. Audi Elsa Newsletter
• 10226502Jul 19, 2013Vehicle speed control. Rough gear changes both when accelerating and slowing down
• 10210652Jul 19, 2013Transmission and drivetrain, Electrical system. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these…
• 10124499Jul 19, 2013Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch…
• 10053883Jul 19, 2013Steering. Audi: in some vehicles, the clutches, after having torque converter, complete gearbox replacement or mechatronics, must adapt to new components with gradual moving of clutch linings in most diverse load conditions. Models 2004-14, a3, tt, q7, a4, a5, a6, a7, a8, q5, s4, s5, s6, s7, rs5.
• 10124576Jul 18, 2013Exterior lighting. Supersedes Technical Service Bulletin Group 94 number 13-20 dated July 3, 2013. There is considerable moisture present in the headlamp. The moisture disappears only after extended drives (greater than 10 minutes). There is no external damage to the headlamp which could introduce moisture.
• 10124514Jul 18, 2013Electrical system. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly. When the rear lid is opened, the paddle switches change state and the comfort system…
• 10068714Jul 18, 2013Exterior lighting. Summary to be provided on a future date.

← All problems reported for the 2011 Audi Q7