2019 Can-AM Ryker Electrical system Problems
- Complaints
- 7about this part
- Share
- 18%of 39 total for the year
- Median mileage
- 2,200miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 7 complaints about the electrical system of the 2019 Can-AM Ryker, 18% of the 39 complaints for this model year. Where a mileage was given, the median is 2,200 miles. 1 of these say a crash was involved, according to the filers. 1 recall campaign on record is filed under a similar system.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“When going on left turns feel like it jerks or like the abs is kicking in and I'm not sliding. When this happens it pushes me to the outside of the curve. Has done it since day one of owning it. Bought brand new. Hundreds of people on social media are have the same problem and the refuse to fix it.”
NHTSA complaint #11461346, filed 2022-04“VSS code is triggered with three codes making the Ryker go into limp mode. It started happening when I was going around turns (left) then eventually it locked me out of full performance. YAW/SAS C0063 and/or C0052 and *C006C) I hit a guard rail as it jolted me. Turns out there are many that have had the same problem when noted threw BRP dealers. So this is a known problem with the pitman steering arm bushings. Mine is most defiantly loose.”
NHTSA complaint #11433278, filed 2021-09“When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I’ve looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I’ve researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it’s not an issue being reported enough. I can’t afford to have this issue that came from factory fixed because they don’t want to fix their issue. …”
NHTSA complaint #11510105, filed 2023-03“When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I’ve looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I’ve researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it’s not an issue being reported enough. I can’t afford to have this issue that came from factory fixed because they don’t want to fix their issue. …”
NHTSA complaint #11510104, filed 2023-03“The Stability Control System engages on low speed left turns when it is not required. It does not engage on right turns at similar speed and sharpness of corner. Power is cut to the rear wheel and the right brake engages, causing a wobble , unsteady, and jumping sensation. This creates unease and the sense of losing control. I've been told this is a common problem that the YAW sensor and sas system is faulting. please get this fixed as it is dangerous.”
NHTSA complaint #11546444, filed 2023-09Related recalls
- 22V799000Oct 22, 2022Bombardier Recreational Products (BRP) is recalling certain 2019-2023 Ryker motorcycles. The position light and flasher electrical harnesses in the front…Covers: Can-AM Ryker 2019–2023
Related service bulletins
- 11003267Jun 21, 2024RYKER YAW Rate - SAS Sensor Faults These 3 faults (C0063 and/or C0051 and *C006C) can be triggered if the front suspension has excessive play or the front wheel alignment is out…
- 10229607Dec 12, 2022Yaw rate sensor faults might be triggered due to loose front suspension components.
- 10226796Nov 16, 2022This bulletin is the detailed repair procedure if the position light and flasher electrical harness in the front fenders have rubbed on the tires wearing the insulating sheath.
- 10176805Jun 20, 2020Vehicle may indicate brake light switch failure. One of the probable cause is the adjustment of the brake light switch/low pressure switch.
- 10194473Feb 21, 2019Warranty Bulletin no 2019-6 Speed Sensor Wiring Harness-Corrugated Tube Installation- Unregistered Vehicles Only. The front speed sensor wiring harness could get pinched during…
Electrical system: other model years
Other parts of the 2019 Can-AM Ryker
17 complaintsWheels
14 complaintsBrakes
10 complaintsVehicle speed control
5 complaintsOther or unknown
4 complaintsSuspension
4 complaintsEngine
2 complaintsForward collision avoidance
2 complaintsExterior lighting
1 complaintsFuel system
1 complaintsTransmission and drivetrain
1 complaints
← All problems reported for the 2019 Can-AM Ryker
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 29, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology