2019 Can-AM Ryker Brakes Problems

“Spits gasoline and continue to read fuel fault! My right wheel has been making a rattle noise since the recall install. Brakes have made noise since purchase”

“When going on left turns feel like it jerks or like the abs is kicking in and I'm not sliding. When this happens it pushes me to the outside of the curve. Has done it since day one of owning it. Bought brand new. Hundreds of people on social media are have the same problem and the refuse to fix it.”

“On 06/28, while operating my vehicle at around 20 miles an hour I received a Brake Failure warning (indicated by a message on the vehicle display) and my brakes began to fail to fully engage. I was able to stop the vehicle after pressing the brake multiple times. I shut down the vehicle and the brakes returned to normal operation, however after riding just a few miles the issue began again. The issue persists and the requirement to pump the brake peddle to achieve a stop remain consistent. I have taken the vehicle to a shop to have the vehicle inspected and repaired. …”

“When making left hand turns the rear brake and front right surges on its own making it hard to control the vehicle. BRP knows the issue and has a TSB on it but the fix is a bandaid. The problem is the bearing failures that keep occurring in the pitman arm due to poor design, but BRP is saying this isn’t happening, even though it is a major complaint on the BRP Ryker forms. BRP TSB number # 137209”

“while making a left turn the right front brake comes on and causes the steering to shake and the rear to seem to fishtail. the bike has been back to the dealer for repairs several times. the last time it was there 10 months. got it back in march and it was good for almost a month and then it started again. the dealer is trying but can-am doesn't seem to be much help. been in the shop for over 15 months total.”