Skip to content
SteeringPart report

2000 Ford Crown Victoria Steering Problems

Complaints
8about this part
Share
9%of 85 total for the year
Median mileage
46,000miles
Trend
Not enough dataFewer than 15 complaints, too few for a reliable trend.

NHTSA recorded 8 complaints about the steering of the 2000 Ford Crown Victoria, 9% of the 85 complaints for this model year. Where a mileage was given, the median is 46,000 miles.

Fewer than 15 complaints name this part, so treat the figures as a rough indication only.

Example complaints

Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.

“Was steering into an isle of parking spots when suddenly and without warning, the steering wheel began to spin freely and effortlessly. I immediately stopped the car because it could do nothing but go in the direction the tires were turned at the time of the steering failure, which in my case, would have been right into three parked cars. Upon inspection, the steering column had come loose from the rest of the car, causing a loss in control as far as steering was concerned. …”

NHTSA complaint #10521264, filed 2013-06, 46,000 miles

“My wife was on her way home from work and she called me saying that something was wrong with the car. She said it was swaying back and forth on the highway and was very difficult to drive. She made it home and pulled into the drive way. When she turned the steering wheel strait the front driver side of the car hit the ground. When I got home I looked at it and seen that the lower ball joint had come out of the socket. I looked up my vehicle online and seen that I wasn't the only one with this problem. …”

NHTSA complaint #10487380, filed 2012-12, 88,317 miles

“While driving at a low speed (< 25 MPH) on a local rural road that leads to my house, I heard a sudden scraping noise and had a difficult time turning the vehicle into my driveway. Upon inspection I found the front passenger side tie road disconnected from the front wheel and dragging on the ground. Upon replacement the mechanic noted the tie rod had failed due to corrosion and material loss. If this failure had happened at highway speed, this would have resulted in loss of control of the vehicle and a severe crash.”

NHTSA complaint #10261857, filed 2009-03, 135,000 miles

“The engine in my 2000 Crown Victoria stalled at a stop sign, and I lost the power steering and power brakes. The car turned into a tank and could not be controlled. It was extremely scary because I could have hit some innocent people which would have meant another lawsuit for Ford. I had to put one foot on the brake and one foot on the accelerator to get the car to an auto service center. At 38,938 miles, the car needed a new idle speed control motor, air filter, and mass air flow sensor. …”

NHTSA complaint #10071183, filed 2004-01, 38,938 miles

“I was making a right hand turn at a slow speed (>10mph) when the intermediate steering shaft separated from the lower steering shaft, resulting in a loss of steering.”

NHTSA complaint #10538254, filed 2013-09, 46,000 miles

Steering: other model years

YearComplaintsShare of year
20111252%
2010758%
20091739%
20082550%
20072550%
20062751%
20053619%
20041914%
2003114%
200259%
2001713%
200089%
1999107%
199876%
1997114%
19963713%
19959940%
1994137%
1993148%
1992165%
199135%
199012%
198923%
198837%
198737%
198627%
198515%

Other parts of the 2000 Ford Crown Victoria

Engine cooling
19 complaints
Fuel system
12 complaints
Exterior lighting
11 complaints
Suspension
9 complaints
Tires
7 complaints
Brakes
6 complaints
Electrical system
6 complaints
Vehicle speed control
6 complaints
Visibility (wipers, defrost, mirrors)
5 complaints
Body and structure
4 complaints
Transmission and drivetrain
3 complaints
Engine
2 complaints

← All problems reported for the 2000 Ford Crown Victoria

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 31, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.

To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology