2007 Mazda MAZDA5 Brakes Problems
- Complaints
- 3about this part
- Share
- 5%of 61 total for the year
- Median mileage
- 44,000miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 3 complaints about the brakes of the 2007 Mazda MAZDA5, 5% of the 61 complaints for this model year. Where a mileage was given, the median is 44,000 miles. 1 a fire, according to the filers.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“I have been informed that the rotors on my 2007 Mazda 5 need to be turned because they overheat and cause warping. It is not reasonable that rotors must be turned at about 17000 miles, I have seen on the web the numerous complaints about similar situation. They state that the rotors are a normal wear item and thus not covered. I have had many vehicles throughout my life and this quality and life of these rotors are unacceptable, vehicles average well over 30,000 miles before any type of maintenance must be performed.”
NHTSA complaint #10281108, filed 2009-08, 17,000 miles“The contact owns a 2007 Mazda 5. While driving approximately 62 MPH with the cruise control activated, the brake pedal failed to operate. The contact applied the emergency brake, pulled the clutch, and the cruise control was deactivated in order for the vehicle to brake. The failure recurred twice. The vehicle was taken to an independent mechanic where the failure was undetermined. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 116,000.”
NHTSA complaint #10860106, filed 2016-04, 116,000 miles“The contact owns a 2007 MAZDA5. While driving between 35-40 MPH, the brakes failed. The contact maneuvered the vehicle to the right and left in order to slow down. The vehicle stopped and the contact exited. She noticed smoke and flames underneath the vehicle. The fire department extinguished the flames. After the investigation, the fire department could not determine the cause of the failure. The current and failure mileages were 44,000.”
NHTSA complaint #10269988, filed 2009-05, 44,000 milesRelated service bulletins
- 11032103Apr 21, 2026This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory…
- 10251387Feb 12, 2024Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10208556Feb 23, 2022Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10173097Mar 12, 2020Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10170657Jan 8, 2020Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
- 10153307Jan 14, 2019Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the…
- 10153227Jan 10, 2019Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
- 10153319Jan 3, 2019Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement…
- 10148003Oct 10, 2018Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the…
- 10142515May 11, 2018Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO…
Brakes: other model years
Other parts of the 2007 Mazda MAZDA5
21 complaintsSuspension
12 complaintsTires
6 complaintsTransmission and drivetrain
5 complaintsElectrical system
4 complaintsBody and structure
4 complaintsAir bags
3 complaintsEngine
3 complaintsEngine cooling
3 complaintsOther or unknown
3 complaintsLatches, locks and linkages
2 complaintsSeat belts
2 complaints
← All problems reported for the 2007 Mazda MAZDA5
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 30, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology