2003 Mazda MAZDA6 Brakes Problems
- Complaints
- 24about this part
- Share
- 14%of 174 total for the year
- Median mileage
- 10,000miles
- Trend
- FallingComplaints filed in the last 3 full calendar years are at least 25% lower than in the 3 years before.
NHTSA recorded 24 complaints about the brakes of the 2003 Mazda MAZDA6, 14% of the 174 complaints for this model year. Where a mileage was given, the median is 10,000 miles. 1 recall campaign on record is filed under a similar system.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“When I take my foot off the gas it stays at the same speed or it speeds up on its own. When I press on the break sometimes it feels like it's not going to stop and just keep going or it jerks forward when I stop. This happens when I am driving on the road and the cruise control is not on when this happens.”
NHTSA complaint #11343015, filed 2020-08, 159,185 miles“2003 Mazda 6 2.3l a/t with 10,450 miles: right front disc brake component(s) failure. Took the car to a Mazda service center and was told a special repair kit was required but that Mazda was only authorizing the dealers to repair this under warrenty, on a case-by-case basis. I have not experienced brake failure at this time, and I have scheduled service to examine and repair.”
NHTSA complaint #10058285, filed 2004-02, 10,460 miles“It was at 7,000 miles on vehicle, that I experienced the brakes acting like they were out of round. It was at 11,000 miles that I had the brakes checked out. I was told that all 4 disk brake rotors needed to be resurfaced. Dealership said it was because I had taken my car to a car wash and that all 4 rotors had warped.”
NHTSA complaint #10080476, filed 2004-07, 7,000 miles“Front (right) end squeaks/grinds mainly while turning, however has continued after straightening out. Started around 10,000 miles. I've taken it in 3 different times to two different dealers. This last time (now at ~50,000) I was told it was a break pad problem and that: my break pads were 80% worn. My rotors needed to be turned. I was also now charged for this visit that still didn't fix the problem.”
NHTSA complaint #10130625, filed 2005-07, 10,000 miles“We bought our new 2003 Mazda 6 in july 2003. Few months later my wife noted a loud scraping/grinding noise from the front end when making sharp slow left or right turns with brakes applied. The noise also occurred when pulling into a parking space. This happened 3-4 times weekly. Finally , we brought the car into the dealership at least 3 times for the problem, but the noise could not be reproduced consistently. A engine belt was replaced in 12/03, but the problem persisted. …”
NHTSA complaint #10058635, filed 2004-02, 2,400 milesRelated recalls
- 03V207000Jun 5, 2003Certain passenger vehicles fail to comply with requirements of federal motor vehicle safety standard no. 135, "passenger car brake systems." during…Covers: Mazda MAZDA6 2002–2003
Related service bulletins
- 11032103Apr 21, 2026This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory…
- 10251387Feb 12, 2024Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10208556Feb 23, 2022Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10173097Mar 12, 2020Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10170657Jan 8, 2020Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
- 10153307Jan 14, 2019Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the…
- 10153227Jan 10, 2019Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
- 10148003Oct 10, 2018Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the…
- 10142515May 11, 2018Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO…
- 10136776Apr 27, 2018Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
Brakes: other model years
| Year | Complaints | Share of year |
|---|---|---|
| 2018 | 4 | 7% |
| 2017 | 4 | 7% |
| 2016 | 14 | 18% |
| 2015 | 17 | 28% |
| 2014 | 17 | 12% |
| 2013 | 5 | 22% |
| 2012 | 2 | 2% |
| 2011 | 4 | 3% |
| 2010 | 16 | 7% |
| 2009 | 9 | 2% |
| 2008 | 3 | 3% |
| 2007 | 1 | 1% |
| 2006 | 7 | 4% |
| 2005 | 6 | 4% |
| 2004 | 11 | 7% |
| 2003 | 24 | 14% |
| 2002 | 2 | 7% |
Other parts of the 2003 Mazda MAZDA6
36 complaintsTransmission and drivetrain
36 complaintsAir bags
30 complaintsElectrical system
18 complaintsVehicle speed control
18 complaintsFuel system
15 complaintsBody and structure
11 complaintsEngine
10 complaintsSuspension
9 complaintsSteering
7 complaintsEquipment
4 complaintsOther or unknown
4 complaints
← All problems reported for the 2003 Mazda MAZDA6
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 30, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology