2013 Mazda MAZDA6 Brakes Problems
- Complaints
- 5about this part
- Share
- 22%of 23 total for the year
- Median mileage
- 18,896miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 5 complaints about the brakes of the 2013 Mazda MAZDA6, 22% of the 23 complaints for this model year. Where a mileage was given, the median is 18,896 miles.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“The brakes have been replaced a total of 14 times starting at 18,896 miles, it was recommended to be replaced at 16,578. The headlights have been replaced 15 times starting at 20,662 miles. Also at the time of the 1st brake replacement, the right shock had to be replaced. I have been pulled over several times within 2 weeks after having lights replaced to tell me they were out again.”
NHTSA complaint #11032679, filed 2017-10, 18,896 miles“I nave had to replace the brakes 15 times starting at 18,896 miles and the lights 15 times since 20,662 miles. I have been pulled over several times about the lights, after they had just been replaced. I was told that the right and left harness needed to be replaced. I just took it back for the 15th time this time the harness is rusted supposedly because of a crack in the covering, if that is why it was rusted why was it not taken care of when it occurred while it was under warranty. I haven't been given an explanation for the brakes. …”
NHTSA complaint #11035702, filed 2017-10, 18,896 miles“I just baught a 2013 MAZDA6 the rear cradel and cross member was complety rusted away one mount was complety rusted off .the springs was almost ready to fall out the bottem of the spring purch .it looked like it was pulled out of the ocean where it had stayed for years .I tried to find a used replacement out of several we found from 10-13 and going thru national salvage parts we can not find one that was not rusty away all the MAZDA6 frams were so rusted they could not be used .why is this not on the recall list if all I could find are rusted out parts that is a safty hazzard to have on the…”
NHTSA complaint #11560838, filed 2023-12“Headlights have repeatedly been replaced 3-2014 latest 3-2017 a total of 12 times this started at 20,662 miles, also brakes 3-2014 latest 2-2017 total of 9 times this started at 18,896 miles”
NHTSA complaint #10967763, filed 2017-03Related service bulletins
- 11032103Apr 21, 2026This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory…
- 10251387Feb 12, 2024Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10208556Feb 23, 2022Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10173097Mar 12, 2020Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as…
- 10170657Jan 8, 2020Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
- 10153307Jan 14, 2019Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the…
- 10153227Jan 10, 2019Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
- 10148003Oct 10, 2018Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the…
- 10142515May 11, 2018Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO…
- 10136776Apr 27, 2018Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to…
Brakes: other model years
| Year | Complaints | Share of year |
|---|---|---|
| 2018 | 4 | 7% |
| 2017 | 4 | 7% |
| 2016 | 14 | 18% |
| 2015 | 17 | 28% |
| 2014 | 17 | 12% |
| 2013 | 5 | 22% |
| 2012 | 2 | 2% |
| 2011 | 4 | 3% |
| 2010 | 16 | 7% |
| 2009 | 9 | 2% |
| 2008 | 3 | 3% |
| 2007 | 1 | 1% |
| 2006 | 7 | 4% |
| 2005 | 6 | 4% |
| 2004 | 11 | 7% |
| 2003 | 24 | 14% |
| 2002 | 2 | 7% |
Other parts of the 2013 Mazda MAZDA6
5 complaintsAir bags
4 complaintsExterior lighting
4 complaintsOther or unknown
4 complaintsBody and structure
3 complaintsSeats
2 complaintsVisibility (wipers, defrost, mirrors)
2 complaintsElectrical system
1 complaintsFuel system
1 complaintsSeat belts
1 complaintsSteering
1 complaintsTransmission and drivetrain
1 complaints
← All problems reported for the 2013 Mazda MAZDA6
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 31, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology