2014 Audi Q5 Technical Service Bulletins

1,388 technical service bulletins (TSBs) are on record for the 2014 Audi Q5. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10124721Oct 9, 2014Engine cooling. Supersedes Technical Service Bulletin Group 20 number 14-34 dated June 26, 2014. MIL on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
• 10066336Oct 9, 2014Equipment. Summary to be provided on a future date.
• 10066025Oct 9, 2014Brakes. Summary to be provided on a future date.
• 10243756Oct 6, 2014Equipment. Audi Elsa Newsletter
• 10226490Oct 2, 2014Transmission and drivetrain. Customer may report harsh shift concerns; no faults are stored and concern is reproducible
• 10210697Oct 2, 2014Exterior lighting. TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in the Service portion of this bulletin) before TAC is contacted. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced.
• 10124763Oct 2, 2014Electrical system, Equipment. Supersedes Technical Service Bulletin Group 91 number 13-08 dated September 20, 2013. The customer would like to add a different navigation map database for countries outside of the USA or Canada. The customer would like to change the MMI system language to a different language that is not already supported by MMI.
• 10124723Oct 2, 2014Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 12-65 dated September 25, 2012. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced. No faults are stored. TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in…
• 10243764Sep 29, 2014Equipment. Audi Elsa Newsletter
• 10226418Sep 25, 2014Lane departure. Lane change assist false vehicle warning (foil kit installation)
• 10124796Sep 25, 2014Electrical system. Customer reports that the side assist is providing warnings when no vehicles are present. The radar is reflected from the rear wheels back to the sensors, resulting in a false side assist warning.
• 10066452Sep 25, 2014Electrical system. Summary to be provided on a future date.
• 10124806Sep 23, 2014Visibility (wipers, defrost, mirrors). Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
• 10243763Sep 22, 2014Equipment. Audi Elsa Newsletter
• 10216689Sep 18, 2014Equipment. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information on the DTC code listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
• 10124815Sep 18, 2014Electrical system. Supersedes Technical Service Bulletin Group 20 number 14-36 dated August 14, 2014. MIL on.DTC P310B is stored in the engine control module, J623 (address word 01), with symptom code 6183.
• 10065969Sep 18, 2014Electrical system, Engine. Summary to be provided on a future date.
• 10243762Sep 15, 2014Equipment. Audi Elsa Newsletter
• 10124798Sep 12, 2014Visibility (wipers, defrost, mirrors). Supersedes Technical Service Bulletin Group 92 number 14-08 dated August 19, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank.
• 10216628Sep 10, 2014Engine cooling. Customer vehicle is fitted with unauthorized ECM tuning.
• 10124823Sep 10, 2014Equipment. Customer vehicle is fitted with unauthorized ECM tuning. All systems on Audi vehicles are engineered to work together using the factory calibrations, which have been extensively tested and validated before the vehicle is released for sale. The Audi warranty coverage is based on the results of developing the vehicle under the factory calibration.
• 10216688Sep 9, 2014Equipment. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information on the DTC code listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
• 10124816Sep 9, 2014Electrical system. DTC P045600 is stored in the engine control module (ECM), J623 (address word 01). Note that this repair authorization applies only to a specific list of VINs. If this repair authorization does not appear in ELSA when your VIN is entered, it does not apply.
• 10065968Sep 9, 2014Electrical system. Summary to be provided on a future date.
• 10124803Sep 5, 2014Electrical system. Supersedes Technical Service Bulletin Group 91 number 14-53 dated July 24, 2014. MMI 3G+ GPS location is inaccurate (MY13, MY14, & MY15).
• 10066405Sep 5, 2014Equipment. Summary to be provided on a future date.
• 10216654Sep 2, 2014Back-over prevention (rear camera). The message ?Oil minimum warning, add one quart of oil? appears in the instrument cluster, but the oil level is above the minimum level (when measured with special tool T40178). ? There are no DTCs related to oil level stored in the ECM memory. The oil level sensor is defective.
• 10124817Sep 2, 2014Electrical system. Supersedes Technical Service Bulletin Group 17 number 14-51 dated August 18, 2014. The message ?Oil minimum warning, add one quart of oil? appears in the instrument cluster, but the oil level is above the minimum level (when measured with special tool T40178). There are no DTCs related to oil level stored in the ECM memory. The oil level sensor is defective.
• 10065956Sep 2, 2014Electrical system. Summary to be provided on a future date.
• 10243760Sep 1, 2014Equipment. Audi Elsa Newsletter
• 10212655Aug 28, 2014Engine cooling. The engine judders or runs erratically. The vehicle judders during acceleration. No event entry is stored in the engine control module (ECM). The air mass meter is suspected to be faulty. Possible incorrect function on the sensor elements of the air mass meter.
• 10210603Aug 28, 2014Engine cooling, Engine. Possible incorrect function on the sensor elements of the air mass meter.
• 10133234Aug 28, 2014Electrical system, Engine cooling, Fuel system. The engine judders or runs erratically. The vehicle judders during acceleration. No event entry is stored in the engine control module (ECM). The air mass meter is suspected to be faulty. Possible incorrect function on the sensor elements of the air mass meter.
• 10250953Aug 26, 2014Equipment. Repair Authorization
• 10066423Aug 19, 2014Electrical system. Summary to be provided on a future date.
• 10216653Aug 18, 2014Engine cooling. The message ?Oil minimum warning, add one quart of oil? appears in the instrument cluster, but the oil level is above the minimum level (when measured with special tool T40178). ? There are no DTCs related to oil level stored in the ECM memory. The oil level sensor is defective.
• 10065955Aug 18, 2014Electrical system. Summary to be provided on a future date.
• 10216652Aug 15, 2014Engine cooling. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
• 10216687Aug 14, 2014Equipment. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information on the DTC code listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
• 10065967Aug 14, 2014Electrical system. Summary to be provided on a future date.
• 10056446Aug 14, 2014Fuel system. Audi: diagnostic trouble code (dtc) p310-b00, low fuel pressure regulation outside of specification, sporadic/passive. Symptom 6183. Malfunction indicator lamp (mil) on. Model 2014 a4, a5, a5 cabriolet, a6, a7, a8, q5.
• 10250956Aug 13, 2014Equipment. Repair Authorization
• 10250955Aug 11, 2014Brakes. Brake pad wear warning - pads not at minimum
• 10066308Aug 11, 2014Brakes. Summary to be provided on a future date.
• 10250954Aug 4, 2014Equipment. Repair Authorization.
• 10122524Jul 31, 2014Equipment. Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
• 10228298Jul 30, 2014Engine cooling. A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
• 10122568Jul 30, 2014Equipment. Supersedes Technical Service Bulletin Group 91 number 13-87 dated June 19, 2013. The MMI control knob joystick is loose or has fallen off. Only vehicles with navigation and without MMI touch are affected.
• 10122523Jul 30, 2014Electrical system. A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated. This DTC is normal. It indicates that the parameter data has not been properly programmed into the ECU by SVM.
• 10066402Jul 30, 2014Equipment. Summary to be provided on a future date.

← All problems reported for the 2014 Audi Q5