Skip to content
SteeringPart report

2009 Dodge Caliber Steering Problems

Complaints
16about this part
Share
7%of 232 total for the year
Median mileage
91,000miles
Trend
FallingComplaints filed in the last 3 full calendar years are at least 25% lower than in the 3 years before.

NHTSA recorded 16 complaints about the steering of the 2009 Dodge Caliber, 7% of the 232 complaints for this model year. Where a mileage was given, the median is 91,000 miles. 1 of these say a crash was involved, according to the filers.

Example complaints

Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.

“2009 Dodge Caliber, within 3 months of buying vehicle, as is, started having acceleration problems, brake and suspension problems. Took vehicle to dealer, was informed I needed suspension bar and struts replaced which would cost over $800. About the same time my transmission overheat light started coming on, I loose power and have to pull over on the side of the road for 15-30 minutes before vehicle would drive again. Go approx. 23 miles at a time when same problem occurs. Worse in the summer time. …”

NHTSA complaint #10820124, filed 2016-01, 68,000 miles

“Car started falling apart at around 48k tie rods. Control arms. Struts. Bushings. Ball joints. Bearings. Sway bar links. Lateral arm bushings. Upper control arm bushings. Upper tow links. Front strut mounts. My latest repair bill (today) is 1500.00 and the car has only 60k on it. The catalytic converter is also slated for replacement as soon as the dealer gets it in. I am a very conservative driver and always keep my car serviced. I bought this car brand new. The suspension on this car is a menace. …”

NHTSA complaint #10574166, filed 2014-03, 48,000 miles

“I took my wife's 2009 Caliber to our mechanic because she heard clunking noises from the front end. We were informed by our mechanic that a piece of frame stretching across the front of the vehicle is severely rusted. The steering rack and sway bars attach to this frame work. Also front end components. The vehicle makes loud plunking noices when going over small and large bumps and much worse when hitting pot holes. No other rust is apparent on any fram work under the vehicle. This vehicle is only nine years old. I think that's extremely odd for such a young vehicle. …”

NHTSA complaint #11074388, filed 2018-02, 132,656 miles

“This car attempted to kill me twice. First the subframe rotted out due to bad design. We noticed this as the struts were being replaced - also because of bad design. This was noticed in 2014 (on a 2009 vehicle!) cost me over $1,000 to fix - Dodge offered no help at all. Later in 2014 - the front drivers side arm separated from wheel, causing wheel to pop off. If I was going any faster than the 10 MPH I was going (headed to highway!), I could have been killed. Again contacted Dodge and no assistance. They recalled the 2007 but not this model year for these problems. Pictures attached. …”

NHTSA complaint #10905575, filed 2016-09, 110,000 miles

“Subframe rotted away. Causing the drivers side a-arm to rip out. The wheel was at an approximate 90 degree angle from normal position. Caused the driveshaft to pull out of the transmission and the car to immediately stop.”

NHTSA complaint #11150325, filed 2018-11, 127,000 miles

Related service bulletins

Steering: other model years

YearComplaintsShare of year
201224%
201195%
2010128%
2009167%
20083510%
20079811%

Other parts of the 2009 Dodge Caliber

Transmission and drivetrain
64 complaints
Suspension
61 complaints
Body and structure
49 complaints
Other or unknown
25 complaints
Electrical system
23 complaints
Engine
22 complaints
Fuel system
11 complaints
Wheels
11 complaints
Tires
10 complaints
Vehicle speed control
10 complaints
Brakes
9 complaints
Engine cooling
8 complaints

← All problems reported for the 2009 Dodge Caliber

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 28, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.

To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology