2014 GMC Sierra 2500 Technical Service Bulletins

1,812 technical service bulletins (TSBs) are on record for the 2014 GMC Sierra 2500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10139412Jan 12, 2015Engine cooling. This informational bulletin supplies infomation for identifying non-GM (Aftermarket) engine calibrations for gasoline engines using Tech 2® or GDS 2 (U.S. and Canada).
• 10139411Jan 12, 2015Equipment. This preliminary informational bulletin provides information that accessory remote start does not work with OnStar RemoteLink? phone application.
• 10139410Jan 12, 2015Equipment. This preliminary informational bulletin provides inspection and repair information that may be helpful to correct customer concerns of XM/Cellular Mobile Phone/OnStar® antenna looseness or damage, XM/Cellular/OnStar® reception performance degraded, rattle/flutter/squeak noise, wind noise/whistle at highway speeds, and/or a water leak on headliner at sunvisor.
• 10139409Jan 12, 2015Electrical system. This informational bulletin adds 2011 - 2014 model years to information on voltmeter gauge fluctuation due to regulated voltage control system and concerns about camper/trailer battery charging.
• 10114338Jan 12, 2015Fuel system. This Preliminary Information communication advises the technician the diesel oxidation converter part restriction has ended. Dealer can now order the parts through the regular Customer Care and Aftersales parts process.
• 10095162Jan 12, 2015Equipment. This preliminary information communication advises the technician the diesel oxidation converter part restriction has ended. Dealer can now order the parts through the regular customer care and aftersales parts process.
• 10114337Jan 9, 2015Equipment. This Preliminary Information communication advises the technician before replacing the crankshaft to review the following. Dealer should complete the Service Information diagnostics and the Cost Comparison Worksheet for Assembly Repair vs Replacement. Technician will use the latest version of 09-06-04-026G to verify the ECM calibration is not an Aftermarket calibration. If the customer prefers to KEEP the original…
• 10095185Jan 9, 2015Equipment. This preliminary information communication advises the technician before replacing the crankshaft to review the following. Dealer should complete the service information diagnostics and the cost comparison worksheet for assembly repair vs replacement. Technician will use the latest version of 09-06-04-026g to verify the ecm calibration is not an aftermarket calibration. If the customer prefers to keep the original…
• 10139200Jan 6, 2015Engine, Electrical system. This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.
• 10139199Jan 6, 2015Suspension. This informational bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
• 10139198Jan 6, 2015Tires. This preliminary informational bulletin provides information that the tire pressure monitor (TPM) sensors must always be re-learned when accessory wheels are installed on the vehicle.
• 10114812Dec 29, 2014Engine. This Preliminary Information communication provides information to the technician about vehicles that the engine may run hot with the snow plow installed. Do not exceed 64?kilometers per hour / 40?miles per hour with a snow plow mounted to the vehicle even if equipped with VYU. The vehicle could overheat and be damaged.
• 10114808Dec 23, 2014Engine cooling, Fuel system. This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact the General Motors Product Quality Center for further assistance.
• 10114806Dec 22, 2014Wheels, Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have raised dents or ripple appearance in the side outer panel of the cargo box around the perimeter of the wheel house opening. Technician should first access the rear of the inner wheelhouse area through the tail lamp cavity and the front of the wheelhouse from under the vehicle, and coat the inner hem of the…
• 10126251Dec 19, 2014Transmission and drivetrain. This informational bulletin was created for the Manual Transmission Operating Characteristics. The different noises caused by driver habit, weather conditions , and normal manual transmission noises.
• 10126250Dec 19, 2014Transmission and drivetrain. This preliminary informational bulletin provides informationto the technicians of a fluid leak from the front of the Allison transmission and to gather information on the transmission.
• 10114803Dec 19, 2014Transmission and drivetrain, Engine, Electrical system, Equipment. This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair vehicles with a rough idle and/or vibration at idle in Drive. This condition will not be present in Park, or Neutral. This concern may be caused by ground out within the one or both engine mounts. Technician will use CH-51450-A (Pico Oscilloscope) to measure the vibration disturbance.
• 10114801Dec 19, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that may OnStar inoperative and Navigation/GPS/Compass issues. Technician may find Diagnostic Trouble Codes B101D sym 3C and or F0. Technician will gather data using a scan tool and contact General Motors Technical Assistance Center for further assistance. After approval technician will replace the OnStar module.
• 10250028Dec 18, 2014Electrical system, Fuel system. Special Return - Fuel Tank Module Kit: ACDelco Part Number M10256 (select date codes)
• 10246515Dec 18, 2014Electrical system, Fuel system. Special Return - Fuel Tank Module Kit: ACDelco Part Number M10256 (select date codes)
• 10126248Dec 18, 2014Wheels. This preliminary information bulletin provides information on how to remove stainless steel wheel nut caps with the matching depth of socket used on the wheel nut.
• 10126247Dec 18, 2014Equipment. This preliminary information bulletin advises the technician that there is no update for the customers concerns of the GM remote start doesn't work with the Onstar remotelink phone application.
• 10126238Dec 12, 2014Equipment. This preliminary informational bulletin provides procedures to inspect , replace, or repair the XM radio antenna to correct the customers concern loss XM services, noise and/or water leak.
• 10126237Dec 11, 2014Visibility (wipers, defrost, mirrors). This informational bulletin provide information for the technicians to repair the rear window defroster contact or tabs.
• 10114778Dec 11, 2014Transmission and drivetrain. This Preliminary Information communication provides information to the technician about vehicle with a clunk type noise on start up with the vehicle in park when the vehicle is equipped Allison LCT1000 transmission. This condition is considered to be an operating characteristic of the Allison LCT1000 transmission.
• 10126231Dec 10, 2014Equipment. This information provides the proper way to install the floor mats .
• 10114775Dec 10, 2014Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10114773Dec 10, 2014Steering. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have a grind, pop, shudder or bind feeling/noise in the steering column when turning left or right. Technician will inspect for the lower column bearing to be out of position and the upper intermediate steering shaft to lower column shaft bolt and nut may be contacting the…
• 10126221Dec 8, 2014Electrical system. This warranty informational bulletin advised the technician that when performing a wiring repair, more information is required.
• 10126215Dec 4, 2014Electrical system. This preliminary bulletin provides a procedure to reprogram the IPC module to correct the customers concern of the IPC inop.
• 10114760Dec 3, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will need to call General Motors Technical Assistance Center for further assistance. If the Diagnostic Trouble Code B101D has a sym 37 set please refer to the latest version of PIC5492.
• 10247716Dec 1, 2014Equipment, Electrical system. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
• 10247061Dec 1, 2014Electrical system. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
• 10245938Dec 1, 2014Electrical system. OnStar Module Does Not Support All B101D Symptom Codes.
• 10056464Dec 1, 2014Electrical system. Buick/chevrolet/gmc: due to software anomaly, the instrument cluster analog gauges fails to operate properly. Model 2014 regal, lacrosse, silverado 1500, corvette, sierra 1500, 2015 suburban, tahoe, yukon models. *pe updated 1/13/15.
• 10114271Nov 25, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10114270Nov 25, 2014Equipment. This warranty bulletin provides labor operation numbers for customer concerns that can't be duplicated.
• 10114759Nov 24, 2014Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10114748Nov 24, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
• 10114746Nov 21, 2014Engine. This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.
• 10114267Nov 21, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
• 10114265Nov 20, 2014Electrical system. This technical bulletin provides a procedure to check the headlamp wiring connector and replace if damaged.
• 10114262Nov 18, 2014Brakes. This informational bulletin explains a normal condition for what and how the drive line can clunk.
• 10114260Nov 18, 2014Forward collision avoidance. This information bulletin explains the use of drilling high strength steel in a collision repair and the GM recommended CryoCobalt Drill bit.
• 10114728Nov 13, 2014Fuel system. This Preliminary Information communication advises the technician that the 6.6L Duramax Diesel Engine Fuel Injection Pump Part numbers 12645102, 12658095 and 12661059 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10114724Nov 13, 2014Equipment. This Preliminary Information communication provides information to the technician about customers may inquire about the availability of the passenger compartment air filter. Dealer should advise the customer starting in 2003 the passenger compartment air filter is no longer available as a factory option. For vehicles that are 2007 and later a cabin air filter may be able to be added. Refer to the latest version of…
• 10114723Nov 13, 2014Electronic stability control, Other or unknown. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10114719Nov 11, 2014Vehicle speed control. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10114247Nov 10, 2014Equipment. This preliminary bulletin provides a procedure to paint the areas of the frame, if there are signs of rust/corrosion after the wax coating peeled off.
• 10114245Nov 7, 2014Electrical system. This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations

← All problems reported for the 2014 GMC Sierra 2500