2014 GMC Sierra 2500 Technical Service Bulletins

1,812 technical service bulletins (TSBs) are on record for the 2014 GMC Sierra 2500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10114710Nov 6, 2014Fuel system. This Preliminary Information communication advises the technician when Service Information diagnostics indicates a fuel injector may need to be removed for a repair or replaced the injector will need a new seal. This Preliminary Information contains all the O-ring seal and the injector kit part numbers.
• 10114241Nov 5, 2014Electrical system. This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations
• 10114705Nov 4, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10114240Nov 3, 2014Equipment. This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
• 10114239Nov 3, 2014Equipment. This warranty bulletin clarifies the use of dealer empowerment to satisfy the customer.
• 10254239Nov 1, 2014Body and structure. Wax Coating on Frame Peeling, Metal Shows Corrosion/Rusting.
• 10252163Nov 1, 2014Equipment. XM Audio Traffic And Travel Link Availability And Operation.
• 10250082Nov 1, 2014Transmission and drivetrain. Information on Driveline Clunk Noise
• 10247748Nov 1, 2014Electrical system. Speedometer Needle Accuracy Information.
• 10247093Nov 1, 2014Electrical system. Speedometer Needle Accuracy Information.
• 10247063Nov 1, 2014Visibility (wipers, defrost, mirrors). A/C Blows Warm Or Poor Performance.
• 10246569Nov 1, 2014Transmission and drivetrain. Information on Driveline Clunk Noise
• 10245951Nov 1, 2014Equipment. Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
• 10245809Nov 1, 2014Electrical system. Shift Lever Contacts Ignition Key
• 10245741Nov 1, 2014Equipment. dealer Empowerment Labor Operations and Customer Enthusiam
• 10135356Oct 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10114328Oct 30, 2014Equipment. This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and now is refered to Article 3.2.9 of the 1st addition manual for details of Technician Identification and Accounting of Labor Time
• 10135352Oct 27, 2014Equipment. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
• 10114315Oct 27, 2014Equipment. This information bulletin explains how to measure for oil consumpsion and possible reasons for loss of oil.
• 10114314Oct 27, 2014Equipment. This information bulletin explains how to care and repair the spray-in bed liners.
• 10114312Oct 24, 2014Equipment. This informational bulletin explains not to put multiple keys on one key ring and how to tag a key.
• 10114309Oct 23, 2014Visibility (wipers, defrost, mirrors). This informational bulletin explains how to care for wiper blades.
• 10114308Oct 23, 2014Equipment. This technical bulletin provides a procedure to install a diode on the vehicles that have an aftermarket equipment and air in controlling voltage spikes in the system that cause the engine to run when the key is off or communication concerns between modules.
• 10135349Oct 22, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a vibration that is felt between 1200 ? 1400 engine revolutions per minute when in active fuel management V4 mode. Technician will need to use J?38792-A Electronic Vibration Analyzer 2 or CH?51450-NVH Pico Oscilloscope Diagnostic Kit to measure the frequency of the vibration.
• 10135342Oct 20, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135340Oct 17, 2014Electrical system, Wheels. This Preliminary Information communication provides information to the technician about vehicles that may have a repeat service 4 wheel drive message. Technician may find Diagnostic Trouble Codes C0398, C038D or C0397. Technician will need to reprogram the Transfer case control module with latest software available through tis2web.
• 10135337Oct 17, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10114299Oct 17, 2014Equipment. This informational bulletin provides a quick guide to updating which model vehicle after replacing the IPC.
• 10114296Oct 16, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10114292Oct 13, 2014Electrical system. This preliminary bulletin provides a procedure on how to cold crank test a battery in a vehicle.
• 10135322Oct 10, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135321Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
• 10114289Oct 10, 2014Tires. This informational bulletin provides additional information on how to use the proper adapters to balance HD tires.
• 10135313Oct 6, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a vibration that is felt between 1200 ? 1400 engine revolutions per minute when in active fuel management V4 mode. Technician will need to use J?38792-A Electronic Vibration Analyzer 2 or CH?51450-NVH Pico Oscilloscope Diagnostic Kit to measure the frequency of the vibration.
• 10114281Oct 6, 2014Fuel system. This informational bulletin states that it no longer valid and refers to a new bulletin.
• 10114280Oct 6, 2014Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10135304Oct 2, 2014Electrical system, Engine cooling. This Preliminary Information communication advises the technician that If it is determined the crankshaft needs to be replaced complete the Service Information diagnostics to determine if the crankshaft requires replacement. If determined the engine has bearing and crankshaft damage, the engine should be replaced along with the oil cooler. Also ensure latest version of 09-06-04-026G to verify the Engine Control…
• 10150643Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
• 10142238Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
• 10137817Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
• 10112259Sep 29, 2014Equipment, Fuel system. This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10112258Sep 29, 2014Fuel system, Equipment. This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10150640Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
• 10142231Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
• 10137810Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10150637Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10142226Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10137805Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10112247Sep 23, 2014Electrical system, Body and structure, Interior lighting. This Preliminary Information communication provides information to the technician about the roof beacon switch. The roof beacon switch will be left disconnected from the assembly plant. When a roof beacon light is added technician will need to plug the harness into the switch.

← All problems reported for the 2014 GMC Sierra 2500