2011 Toyota Tundra Engine Problems

“?on 12/26/2014, I started my Tundra, placed it into gear after a 30 second pause and proceeded to literally stand on my breaks to stop the vehicle from lurching forward. The back tires spun causing smoke to emanate from the screeching tires. At the time I placed the vehicle in gear, a pedestrian was walking in front of the Tundra. I almost squashed them.?”

“On sun. 10/11/14, I drove our Tundra on the highway when it lost power. The engine raced and rpms increased, but the speed fell and no acceleration was possible. On a hill, speed fell to about 15 MPH. I was on my way to pick up my horse and trailer; if I had been towing them, it would have been catastrophic especially given the highway speed traffic. It was still dangerous even without the trailer. I turned on my hazard lights and limped off. Check engine lit up. …”

“Cam tower seal problems currently my Tundra is having a camshaft tower seals problem/gasket. I thought my truck was going to catch on fire several times with my grand kids inside while driving.'.with it smoking on the passenger side. This is highly unusual for a Toyota. I thought it would have stopped by now, but it has not. This has been an ongoing problem since I purchased the truck. In doing my research, which I understand is a big repair job as it requires dismantling part of the engine; this is a major problem with this model year that I currently own (2011). …”

“While driving the check engine light came on and I lost propulsion power resulting in vehicle slowing down and almost creating an accident from behind. I had the vehicle checked via a obd2 code checker which resulted in code p2442. After verifying code, it looks as if it is a faulty air intake. Looking through several sources on the internet, it seems to be a very common problem that Toyota is refusing to acknowledge or repair. Please take this issue into consideration and help the consumer. Fuel propulsion system I purchased my 2011 Tundra quarter end 2011. …”

“My truck is smoking while driving as if to catch on fire from the cam tower seals leaking . This has happened several times and the last time it happened was january 14 2018.this is a safety hazard and fire hazard. I had my grand kids in the truck at the time, one has luekemia. I don't want it to burn us all up in the truck. Cam tower seal was leaking from both sides. They also found valve cover was leaking as well. This was a great safety concern due to fire hazard. Factory defect due to insufficient seal applied to the matting surfaces. Defect need to be taken care of please.”